Growth and characterization of CuSbSe2 thin films prepared by electrodeposition

Annealing Effect on One Step Electrodeposited CuSbSe2 Thin Films

The purpose of this work is to study the influence of the annealing temperature on the structural, morphological, compositional and optical properties of CuSbSe2 thin films electrodeposited in a single step. CuSbSe2 thin films were grown on fluorine-doped tin oxide (FTO)/glass substrates using the aqueous electrodeposition technique, then annealed in a tube furnace under nitrogen at temperatures spanning from 250 to 500 °C. The resulting films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis, Raman spectroscopy and UV-Vis spectrophotometer. The annealing temperature plays a fundamental role on the films structural properties; in the range 250–350 °C the formation of pure CuSbSe2 phase from electrodeposited binary selenides occurs. From 400 to 500 °C, CuSbSe2 undergoes a preferential phase orientation change, as well as the increasing formation of copper-rich phases such as Cu3SbSe3 and Cu3SbSe4 due to the partial decomposition of CuSbSe2 and to the antimony losses.

Perovskite-inspired materials for photovoltaics and beyond-from design to devices

Lead-halide perovskites have demonstrated astonishing increases in power conversion efficiency in photovoltaics over the last decade. The most efficient perovskite devices now outperform industry-standard multi-crystalline silicon solar cells, despite the fact that perovskites are typically grown at low temperature using simple solution-based methods. However, the toxicity of lead and its ready solubility in water are concerns for widespread implementation. These challenges, alongside the many successes of the perovskites, have motivated significant efforts across multiple disciplines to find lead-free and stable alternatives which could mimic the ability of the perovskites to achieve high performance with low temperature, facile fabrication methods. This Review discusses the computational and experimental approaches that have been taken to discover lead-free perovskite-inspired materials, and the recent successes and challenges in synthesizing these compounds. The atomistic origins of the extraordinary performance exhibited by lead-halide perovskites in photovoltaic devices is discussed, alongside the key challenges in engineering such high-performance in alternative, next-generation materials. Beyond photovoltaics, this Review discusses the impact perovskite-inspired materials have had in spurring efforts to apply new materials in other optoelectronic applications, namely light-emitting diodes, photocatalysts, radiation detectors, thin film transistors and memristors. Finally, the prospects and key challenges faced by the field in advancing the development of perovskite-inspired materials towards realization in commercial devices is discussed.

Copper—antimony and copper—bismuth chalcogenides—Research opportunities and review for solar photovoltaics

The ternary Cu-Sb- and Cu-Bi-chalcogenides present a rich range of compounds of potential use for large-scale photovoltaics from Earth abundant elements. This paper reviews the state of fundamental knowledge about them, and their technological status with regard to solar cells. Research targets and missing data are highlighted, which may provide opportunities to help realize the goal of sustainable photovoltaics.

The family of ternary Cu-Sb- and Cu-Bi-chalcogenides and their solid solutions present a rich selection of potential candidates for Earth-abundant low toxicity photovoltaic (PV) absorber materials. Moreover, they have some novel features imparted by the ns2 lone pair of electrons on the Sb and Bi ions. This review evaluates them as electronic materials, including experimental and theoretical evaluations of their phases, thermodynamic stability, point defects, conductivity, optical data, and PV performances. Formation of the materials in bulk, thin film, and nanoforms and the properties of the materials are critically assessed with relevance to their suitability for PV devices. There is special emphasis on CuSbS2 and CuSbSe2 which form the mainstay of the device literature and provide the most insights into the present-day limitation of the device efficiencies to 3 or 4%. Missing features of the literature are highlighted and clear statements recommending potential research pathways are made, which may help advance the technological performance from its present stuck position.

Characterization of CuSbSe2 crystallites synthesized using a hot injection method

In this study, a novel and facile hot injection method for the synthesis of single phase CuSbSe₂ crystallites was developed by using low toxic triethylene glycol as both the solvent and reducing agent and triethylenetetramine as co-reducing agent.

Thermoelectric properties of nanocrystalline Cu3SbSe4 thin films deposited by a self-organized arrested precipitation technique

Ternary Cu₃SbSe₄ thin films prepared by an arrested precipitation technique using non-toxic tartaric acid exhibit good thermoelectric properties.

Photoelectrochemically deposited Sb2Se3 thin films: deposition mechanism and characterization

Photoelectrochemically deposited (PED) Sb₂Se₃ thin films present interesting properties and performance. PED can enhance the electroreduction process, which will result in the settlement of the dilemma of compound semiconductor electrodeposition.