Luminescence during the anodization of zirconium

Effect of DC Plasma Electrolytic Oxidation on Surface Characteristics and Corrosion Resistance of Zirconium

Zr is a valve metal, the biocompatibility of which is at least on par with Ti. Recently, numerous attempts of the formation of bioactive coatings on Zr by plasma electrolytic oxidation (PEO) in solutions that were based on calcium acetate and calcium β-glycerophosphate were made. In this study, the direct current (DC) PEO of commercially pure zirconium in the solutions that contained Ca(H₂PO₂)₂, Ca(HCOO)₂, and Mg(CH₃COO)₂ was investigated. The treatment was conducted at 75 mA/cm² up to 200, 300, or 400 V. Five process stages were discerned. The treatment at higher voltages resulted in the formation of oxide layers that had Ca/P or (Mg+Ca)/P ratios that were close to that of hydroxyapatite (Ca/P = 1.67), determined by SEM/EDX. The corrosion resistance studies were performed using electrochemical impedance spectroscopy (EIS) and DC polarization methods. R(Q[R(QR)]) circuit model was used to fit the EIS data. In general, the coatings that were obtained at 200 V were the most corrosion resistant, however, they lacked the porous structure, which is typical for PEO coatings, and is sought after in the biomedical applications. The treatment at 400 V resulted in the formation of the coatings that were more corrosion resistant than those that were obtained at 300 V. This was determined mainly by the prevailing plasma regime at the given process voltage. The pitting resistance of Zr was also improved by the treatment, regardless of the applied process conditions.

Spectroscopic investigation of direct current (DC) plasma electrolytic oxidation of zirconium in citric acid

Plasma electrolytic oxidation of zirconium in citric acid was investigated using optical spectroscopy. A rich emission spectrum consisting of about 360 zirconium and 170 oxygen atomic and ionic lines was identified in the spectral regions 313-320, 340-516, and 626-640 nm. It was shown that the remaining features observed in the spectrum could be ascribed to various molecular species, which involve zirconium, oxygen, hydrogen, and carbon. The temperature of the plasma core (T = 7500 ± 1000 K) was determined using measured Zr line intensities, and the temperature of peripheral plasma zone (T = 2800 ± 500 K) was estimated from the intensity distribution within a part of an OH spectrum. The composition of the plasma containing zirconium, oxygen, and hydrogen, under assumption of local thermal equilibrium, was calculated in the temperature range up to 12,000 K and for pressure of 10(5) and 10(7) Pa, in order to explain the appearance of the observed spectral features.

Investigation of plasma electrolytic oxidation on valve metals by means of molecular spectroscopy – a review

A review of results of molecular spectroscopic investigations during plasma electrolytic oxidation of valve metals is presented.