Facile and controllable synthesis of Prussian blue on chitosan-functionalized graphene nanosheets for the electrochemical detection of hydrogen peroxide

Molecularly Imprinted Polymer Biosensor Based on Nitrogen-Doped Electrochemically Exfoliated Graphene/Ti3 CNTX MXene Nanocomposite for Metabolites Detection

Rapid and accurate quantification of metabolites in different bodily fluids is crucial for a precise health evaluation. However, conventional metabolite sensing methods, confined to centralized laboratory settings, suffer from time-consuming processes, complex procedures, and costly instrumentation. Introducing the MXene/nitrogen-doped electrochemically exfoliated graphene (MXene@N-EEG) nanocomposite as a novel biosensing platform in this work addresses the challenges associated with conventional methods, leveraging the concept of molecularly imprinted polymers (MIP) enables the highly sensitive, specific, and reliable detection of metabolites. To validate our biosensing technology, we utilize agmatine as a significant biologically active metabolite. The MIP biosensor incorporates electrodeposited Prussian blue nanoparticles as a redox probe, facilitating the direct electrical signaling of agmatine binding in the polymeric matrix. The MXene@N-EEG nanocomposite, with excellent metal conductivity and a large electroactive specific surface area, effectively stabilizes the electrodeposited Prussian blue nanoparticles. Furthermore, increasing the content of agmatine-imprinted cavities on the electrode enhances the sensitivity of the MIP biosensor. Evaluation of the designed MIP biosensor in buffer solution and plasma samples reveals a wide linear concentration range of 1.0 nM-100.0 μM (R2 = 0.9934) and a detection limit of 0.1 nM. Notably, the developed microfluidic biosensor offers low cost, rapid response time to the target molecule (10 min of sample incubation), good recovery results for detecting agmatine in plasma samples, and acceptable autonomous performance for on-chip detection. Moreover, its high reliability and sensitivity position this MIP-based biosensor as a promising candidate for miniaturized microfluidic devices with the potential for scalable production for point-of-care applications.

Electrochemical Transparency of Graphene

In the present study, we used the electrochemical transparency of graphene to show that the direct intercalation of alkali-metal cations is not a prerequisite for the redox reaction of Prussian blue (PB). PB thin films passivated with monolayer graphene still underwent electrochemical redox reactions in the presence of alkali-metal ions (K⁺ or Na⁺) despite the inability of the cations to penetrate the graphene and be incorporated into the PB. Graphene passivation not only preserved the electrochemical activity of the PB but also substantially enhanced the stability of the PB. As a proof of concept, we showed that a transparent graphene electrode covering PB can be used as an excellent hydrogen peroxide transducer, thereby demonstrating the possibility of realizing an electrochemical sensor capable of long-term measurements.

Reasonable design of an MXene-based enzyme-free amperometric sensing interface for highly sensitive hydrogen peroxide detection

Sensitive detection of H₂O₂ in the nano- to micromolar range is critical for health monitoring and disease diagnosis. Two-dimensional transition metal carbides or/and nitrides (called MXenes, MXs) have excellent potential applications in the electrochemical field due to their outstanding electrical conductivity and catalytic properties. In this work, Ti₃C₂T_x (MX) was employed for the construction of a sensitive and enzyme-free electrochemical sensing interface for the detection of hydrogen peroxide (H₂O₂) through a simple and effective method. Prussian blue (PB) was electrochemically deposited on the surface of a glassy carbon electrode (GCE). Chitosan (CS) and MX were sequentially dripped onto the PB modified GCE surface. The reasonable fabrication of the MX/CS/PB/GCE sensing interface presented good electrochemical sensing performance towards H₂O₂ with a low limit of detection (4 nM), a wide linear range from 50 nM to 667 μM and good selectivity. The proposed MX/CS/PB/GCE has been proven to monitor H₂O₂ in food samples and biological samples with recoveries between 94.7% and 100.3%. This work has made a beneficial attempt and research for exploring and expanding the application of MXs in the field of electrochemical sensing.

A Highly Sensitive Amperometric Glutamate Oxidase Microbiosensor Based on a Reduced Graphene Oxide/Prussian Blue Nanocube/Gold Nanoparticle Composite Film-Modified Pt Electrode

A simple method that relies only on an electrochemical workstation has been investigated to fabricate a highly sensitive glutamate microbiosensor for potential neuroscience applications. In this study, in order to develop the highly sensitive glutamate electrode, a 100 µm platinum wire was modified by the electrochemical deposition of gold nanoparticles, Prussian blue nanocubes, and reduced graphene oxide sheets, which increased the electroactive surface area; and the chitosan layer, which provided a suitable environment to bond the glutamate oxidase. The optimization of the fabrication procedure and analytical conditions is described. The modified electrode was characterized using field emission scanning electron microscopy, impedance spectroscopy, and cyclic voltammetry. The results exhibited its excellent sensitivity for glutamate detection (LOD = 41.33 nM), adequate linearity (50 nM-40 µM), ascendant reproducibility (RSD = 4.44%), and prolonged stability (more than 30 repetitive potential sweeps, two-week lifespan). Because of the important role of glutamate in neurotransmission and brain function, this small-dimension, high-sensitivity glutamate electrode is a promising tool in neuroscience research.

Electrode Materials for High-Performance Sodium-Ion Batteries

Sodium ion batteries (SIBs) are being billed as an economical and environmental alternative to lithium ion batteries (LIBs), especially for medium and large-scale stationery and grid storage. However, SIBs suffer from lower capacities, energy density and cycle life performance. Therefore, in order to be more efficient and feasible, novel high-performance electrodes for SIBs need to be developed and researched. This review aims to provide an exhaustive discussion about the state-of-the-art in novel high-performance anodes and cathodes being currently analyzed, and the variety of advantages they demonstrate in various critically important parameters, such as electronic conductivity, structural stability, cycle life, and reversibility.

Efficient Sodium-Ion Intercalation into the Freestanding Prussian Blue/Graphene Aerogel Anode in a Hybrid Capacitive Deionization System

In this study, we introduced an efficient hybrid capacitive deionization (HCDI) system for removal of NaCl from brackish water, in which Prussian blue nanocubes embedded in a highly conductive reduced graphene oxide aerogel have been used as a binderfree intercalation anode to remove Na⁺ ions. The combination of redox-active nanocubes and the three-dimensional porous graphene network yielded a high salt removal capacity of 130 mg g^-1 at the current density of 100 mA g^-1. Moreover, energy recovery and energy consumption upon different desorption voltages of the HCDI system were investigated and the result showed a notably low energy consumption of 0.23 Wh g^-1 and a high energy recovery of 39%. Furthermore, the real-time intercalation process was verified by in situ X-ray powder diffraction measurements, which confirmed the intercalation and deintercalation processes during charging and discharging, respectively. Eventually, a perfect stability of the desalination unit was confirmed through the steady performance of 100 cycles. The improved efficiency as well as ease of fabrication opens a shiny horizon for our HCDI system toward commercialization of such technology for brackish water desalination.

A review on graphene-based nanocomposites for electrochemical and fluorescent biosensors

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters.

Prussian blue nanoparticles: Synthesis, surface modification, and application in cancer treatment

This review outlines recently developed Prussian blue nanoparticle (PB NPs)-based multimodal imaging-guided chemo-photothermal strategies for cancer diagnosis and treatment in order to provide insight into the future of the field. The primary limitation of existing therapeutics is the lack of selectivity in drug delivery: they target healthy and cancerous cells alike. In this paper, we provide a thorough review of diverse synthetic and surface engineering techniques for PB NP fabrication. We have elucidated the various targeting approaches employed to deliver the therapeutic and imaging ligands into the tumor area, and outlined methods for enhancement of the tumor ablative ability of the NPS, including several important combinatorial approaches. In addition, we have summarized different in vitro and in vivo effects of PB NP-based therapies used to overcome both systemic and tumor-associated local barriers. An important new approach - PB NP-based immune drug delivery, which is an exciting and promising strategy to overcome cancer resistance and tumor recurrence - has been discussed. Finally, we have discussed the current understanding of the toxicological effects of PB NPs and PB NP-based therapeutics. We conclude that PB NP-based multimodal imaging-guided chemo-photothermal therapy offers new treatment strategies to overcome current hurdles in cancer diagnosis and treatment.

Bioapplications of Electrochemical Sensors and Biosensors

Recent progress in the electrochemical field enabled development of miniaturized sensing devices that can be used in biological settings to obtain fundamental and practical biochemically relevant information on physiology, metabolism, and disease states in living systems. Electrochemical sensors and biosensors have demonstrated potential for rapid, real-time measurements of biologically relevant molecules. This chapter provides an overview of the most recent advances in the development of miniaturized sensors for biological investigations in living systems, with focus on the detection of neurotransmitters and oxidative stress markers. The design of electrochemical (bio)sensors, including their detection mechanism and functionality in biological systems, is described as well as their advantages and limitations. Application of these sensors to studies in live cells, embryonic development, and rodent models is discussed.

Graphene oxide directed in-situ synthesis of Prussian blue for non-enzymatic sensing of hydrogen peroxide released from macrophages

A novel electrochemical non-enzymatic hydrogen peroxide (H₂O₂) sensor has been developed based on Prussian blue (PB) and electrochemically reduced graphene oxide (ERGO). The GO was covalently modified on glassy carbon electrode (GCE), and utilized as a directing platform for in-situ synthesis of electroactive PB. Then the GO was electrochemically treated to reduction form to improve the effective surface area and electroactivity of the sensing interface. The fabrication process was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and atomic force microscopy (AFM). The results showed that the rich oxygen containing groups play a crucial role for the successful synthesis of PB, and the obtained PB layer on the covalently immobilized GO has good stability. Electrochemical sensing assay showed that the modified electrode had tremendous electrocatalytic property for the reduction of H₂O₂. The steady-state current response increased linearly with H₂O₂ concentrations from 5μM to 1mM with a fast response time (less than 3s). The detection limit was estimated to be 0.8μM. When the sensor was applied for determination of H₂O₂ released from living cells of macrophages, satisfactory results were achieved.

Introduction of selectivity and specificity to graphene using an inimitable combination of molecular imprinting and nanotechnology

Recently, the nanostructured modified molecularly imprinting polymer has created a great attention in research field due to its excellent properties such as high surface to volume ratio, low cost, and easy preparation/handling. Among the nanostructured materials, the carbonaceous material such as 'graphene' has attracted the tremendous attention of researchers owing to their fascinating electrical, thermal and physical properties. In this review article, we have tried to explore as well as compile the role of graphene-based nanomaterials in the fabrication of imprinted polymers. In other words, herein the recent efforts made to introduce selectivity in graphene-based nanomaterials were tried collected together. The major concern of this review article is focused on the sensing devices fabricated via a combination of graphene, graphene@nanoparticles, graphene@carbon nanotubes and molecularly imprinted polymers. Additionally, the combination of graphene and quantum dots was also included to explore the fluorescence properties of zero-band-gap graphene.

Recent advances in graphene-based nanomaterials for fabricating electrochemical hydrogen peroxide sensors

Due to the large specific surface area, extraordinary mechanical flexibility, chemical stability, and superior electrical and thermal conductivities, graphene (G)-based materials have recently opened up an exciting field in the science and technology of two-dimensional (2D) nanomaterials with continuously growing academic and technological impetus. In the past several years, graphene-based materials have been well designed, synthesized, and investigated for sensing applications. In this review, we discuss the synthesis and application of graphene-based 2D nanomaterials for the fabrication of hydrogen peroxide (H₂O₂) electrochemical sensors. In particular, graphene-based nanomaterials as immobilization matrix of heme proteins for the fabrication of enzymatic H₂O₂ electrochemical biosensors is first summarized. Then, the application of graphene-based electrocatalysts (metal-free, noble-metals and non-noble metals) in constructing non-enzymatic H₂O₂ electrochemical sensors is discussed in detail. We hope that this review is helpful to push forward the advancement of this academic issue (189 references).

Graphene composite coated carbon fiber: electrochemical synthesis and application in electrochemical sensing

A universal method for the fabrication of graphene composite modified carbon fiber is reported.

New faces of porous Prussian blue: interfacial assembly of integrated hetero-structures for sensing applications

Prussian blue (PB), the oldest synthetic coordination compound, is a classic and fascinating transition metal coordination material. Prussian blue is based on a three-dimensional (3-D) cubic polymeric porous network consisting of alternating ferric and ferrous ions, which provides facile assembly as well as precise interaction with active sites at functional interfaces. A fundamental understanding of the assembly mechanism of PB hetero-interfaces is essential to enable the full potential applications of PB crystals, including chemical sensing, catalysis, gas storage, drug delivery and electronic displays. Developing controlled assembly methods towards functionally integrated hetero-interfaces with adjustable sizes and morphology of PB crystals is necessary. A key point in the functional interface and device integration of PB nanocrystals is the fabrication of hetero-interfaces in a well-defined and oriented fashion on given substrates. This review will bring together these key aspects of the hetero-interfaces of PB nanocrystals, ranging from structure and properties, interfacial assembly strategies, to integrated hetero-structures for diverse sensing.

Electrocodeposition of silver and silicomolybdate hybrid nanocomposite for nonenzymatic hydrogen peroxide sensor

Electrocodeposition of silver and silicomolybdate hybrid nanocomposite using negatively charged silicomolybdate to induce silver ions to co-deposit on electrode surface.

Development of a hydrogen peroxide sensor based on screen-printed electrodes modified with inkjet-printed Prussian blue nanoparticles

A sensor for the simple and sensitive measurement of hydrogen peroxide has been developed which is based on screen printed electrodes (SPEs) modified with Prussian blue nanoparticles (PBNPs) deposited using piezoelectric inkjet printing. PBNP-modified SPEs were characterized using physical and electrochemical techniques to optimize the PBNP layer thickness and electroanalytical conditions for optimum measurement of hydrogen peroxide. Sensor optimization resulted in a limit of detection of 2 × 10(-7) M, a linear range from 0 to 4.5 mM and a sensitivity of 762 μA ∙ mM(-1) ∙ cm(-2) which was achieved using 20 layers of printed PBNPs. Sensors also demonstrated excellent reproducibility (<5% rsd).

Microporous spongy chitosan monoliths doped with graphene oxide as highly effective adsorbent for methyl orange and copper nitrate (Cu(NO3)2) ions

In the current study, microporous spongy chitosan monoliths doped with small amount of graphene oxide (CSGO monoliths) with high porosity (96-98%), extraordinary high water absorption (more than 2000%) and low density (0.0436-0.0607 g cm(-3)) were prepared by the freeze-drying method and used as adsorbents for anionic dyes methyl orange (MO) and Cu(2+) ions. The adsorption behavior of the CSGO monoliths and influencing factors such as pH value, graphene oxide (GO) content, concentration of pollutants as well as adsorption kinetics were studied. Specifically, the saturated adsorption capacity for MO is 567.07 mg g(-1), the highest comparing with other publication results, and it is 53.69 mg g(-1) for Cu(2+) ions. Since they are biodegradable, non-toxic, efficient, low-cost and easy to prepare, we believe that these microporous spongy CSGO monoliths will be the promising candidates for water purification.