Synthesis of graphene-supported hollow Pt–Ni nanocatalysts for highly active electrocatalysis toward the methanol oxidation reaction

Coordination Effect-Promoted Durable Ni(OH)2 for Energy-Saving Hydrogen Evolution from Water/Methanol Co-Electrocatalysis

Electrocatalytic water splitting is a viable technique for generating hydrogen but is precluded from the sluggish kinetics of oxygen evolution reactions (OER). Small molecule oxidation reactions with lower working potentials, such as methanol oxidation reactions, are good alternatives to OER with faster kinetics. However, the typically employed Ni-based electrocatalysts have poor activity and stability. Herein, a novel three-dimensional (3D)-networking Mo-doped Ni(OH)₂ with ultralow Ni-Ni coordination is synthesized, which exhibits a high MOR activity of 100 mA cm^-2 at 1.39 V, delivering 28 mV dec^-1 for the Tafel slope. Meanwhile, hydrogen evolution with value-added formate co-generation is boosted with a current density of more than 500 mA cm^-2 at a cell voltage of 2.00 V for 50 h, showing excellent stability in an industrial alkaline concentration (6 M KOH). Mechanistic studies based on density functional theory and X-ray absorption spectroscopy showed that the improved performance is mainly attributed to the ultralow Ni-Ni coordination, 3D-networking structures and Mo dopants, which improve the catalytic activity, increase the active site density and strengthen the Ni(OH)₂ 3D-networking structures, respectively. This study paves a new way for designing electrocatalysts with enhanced activity and durability for industrial energy-saving hydrogen production.

One-pot production of a sea urchin-like alloy electrocatalyst for the oxygen electro-reduction reaction

Designing a cost-effective catalyst with high performance towards the oxygen electro-oxidation reaction (ORR) is of great interest for the development of green energy storage and conversion technologies. We report herein a facile self-assembly strategy in a mild reducing environment to realize an urchin-like NiPt bimetallic alloy with the domination of the (111) facets as an efficient ORR electrocatalyst. In the rotating-disk electrode test, the as-obtained NiPt nanourchins (NUCs)/C catalyst demonstrates an increase in both onset potential (0.96 V_RHE) and half-wave potential (0.92 V_RHE) and a direct four-electron ORR pathway with enhanced reaction kinetics. Additionally, the as-made NiPt NUCs/C electrocatalyst also shows impressive ORR catalytic stability compared to a commercial Pt NPs/C catalyst after an accelerated durability test with 15.29% degradation in mass activity, which is 3.04-times lower than 46.48% of the Pt NPs/C catalyst. The great ORR performance of the as-made catalyst is due to its unique urchin-like morphology with the dominant (111) facets and the synergistic and electronic effects of alloying Ni and Pt. This study not only provides a robust ORR electrocatalyst, but also opens a facile but effective route for fabricating 3D Pt-based binary and ternary alloy catalysts.

Pt Nanoclusters Anchored on Hollow Ag-Au Nanostructures for Electrochemical Oxidation of Methanol

The synthetic method of Pt nanocluster-anchored hollow Ag-Au nanostructures and measurements of their electrocatalytic properties for methanol oxidation reaction (MOR) are reported here. In this synthesis, uniform Ag nanospheres were prepared by reduction of silver nitrate (AgNO3) with sodium borohydride (NaBH4) and then hollow Ag-Au nanostructures were synthesized via galvanic replacement of the as-prepared Ag nanospheres with Au3+. Finally, the reduction of potassium tetrachloroplatinate (II) (K2PtCl4) with ascorbic acid was performed to deposit Pt nanoclusters on the surface of hollow Ag-Au nanostructures. The hollow interior of Pt nanocluster-anchored Ag-Au nanostructures and change in the size of Pt nanoclusters by varying the injected molar ratio of Pt/Au were observed by transmission electron microscopy (TEM). Moreover, other morphological, compositional, and optical information of the obtained nanoscale materials were analyzed by X-ray diffraction analysis (XRD), inductively coupled plasma mass spectrometry (ICP-MS), and ultraviolet-visible spectroscopy (UV-vis). The electrocatalytic ability of the obtained Pt nanocluster-anchored hollow Ag-Au nanostructures toward MOR was confirmed by the results of cyclic voltametric (CV) measurements. The ease of three-step synthetic strategy and good electrocatalytic performance of the Pt nanocluster-anchored hollow Ag-Au nanostructures displayed their promising potential in the use of electrochemical oxidation of methanol.

Nanocomposites of NiO/CuO Based MOF with rGO: An Efficient and Robust Electrocatalyst for Methanol Oxidation Reaction in DMFC

In this work a novel bimetallic nickel oxide/copper oxide metal–organic framework (NiO/CuO MOF) has been developed by using two linkers: Benzene Dicarboxylic acid (BDC) and Pyrazine. The composites of NiO/CuO MOF with different amounts of reduced graphene oxide (rGO) were synthesized through a hydrothermal method and subsequently characterized by multiple significant techniques like XRD, SEM, EDX, FTIR and Raman IR for an investigation of their structural and morphological properties. The prepared series of material was later employed for electrochemical oxidation of methanol, tested by cyclic voltammetry (CV) in basic medium on a modified glassy carbon electrode (GCE). The electrochemical response depicts that increasing concentration of rGO enhances the electrocatalytic activity of the catalyst for methanol oxidation reaction (MOR). The catalyzed oxidation reaction of methanol by NiO/CuO MOF and rGO-NiO/CuO MOF composites give a superlative current density of 437. 28 mA/cm² at 0.9 V potential at 50 mV/s scan rate. This activity makes it a promising catalytic material for electrolysis of methanol in direct methanol fuel cell (DMFC).

One-pot solvothermal synthesis of reduced graphene oxide-supported uniform PtCo nanocrystals for efficient and robust electrocatalysis

Pt-based nanocomposites with low Pt utilization and high-activity by incorporating with other transition metals have received significant interest in catalysis. Meanwhile, loading Pt-based catalysts on graphene has great research value for improved stability and dispersity of the catalysts. Herein, a facile l-proline-mediated solvothermal strategy was reported to construct reduced graphene oxide (rGO) supported sheet-like PtCo nanocrystals (Pt₇₈Co₂₂ NCs/rGO) in ethylene glycol (EG). The as-synthesized nanocomposite manifested remarkably improved catalytic properties and chemical stability for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER), surpassing home-made Pt₂₉Co₇₁ nanoparticles (NPs)/rGO, Pt₈₃Co₁₇ NPs/rGO, Pt₅₂Co₄₈ NPs, commercial Pt/C and Pt black catalysts. These scenarios demonstrated an improved catalytic performances by tailoring the feeding ratio of Pt:Co and introducing rGO as a support. This work provides some new insights to design rGO-supported Pt-based catalysts by engineering the shapes and compositions in practical fuel cells.

One-pot synthesis of PtIn/3D-GNs composites with high alloying degree for electro-photo synergistic catalysis

Alloyed PtIn/3D-GNs composites exhibit efficient electro-photo-catalysis under irradiation, deriving from the synergy between the charge separation of In₂O₃ and SPR excitation of In(0).

In vivo detection of salicylic acid in sunflower seedlings under salt stress

A Pt nanoflowers/ERGO modified Pt microelectrode was proposed to detect salicylic acid in plants under salt stress in vivo.

Ultrafine Pt–Ni bimetallic nanoparticles anchored on reduced graphene oxide nanocomposites for boosting electrochemical detection of dopamine in biological samples

The present report demonstrates the development of a Pt–Ni/rGO composite electrochemical sensor for the detection of dopamine.

Electrodeposition of PtNPs on the LBL assembled multilayer films of (PDDA-GS/PEDOT:PSS)n and their electrocatalytic activity toward methanol oxidation

In the present work, PDDA-functionalized graphene sheets (PDDA-GS) were prepared by reduction with hydrazine hydrate in situ in the presence of poly(diallyldimethylammonium chloride) (PDDA).

Highly active Pd–Ni nanocatalysts supported on multicharged polymer matrix

In this article, we report the synthesis of mono- and bimetallic Pd–Ni nanocomposites supported on a multicharged polymeric matrix for catalytic applications.

Gaseous NH3 Confers Porous Pt Nanodendrites Assisted by Halides

Tailoring the morphology of Pt nanocrystals (NCs) is of great concern for their enhancement in catalytic activity and durability. In this article, a novel synthetic strategy is developed to selectively prepare porous dendritic Pt NCs with different structures for oxygen reduction reaction (ORR) assisted by NH₃ gas and halides (F⁻, Cl⁻, Br⁻). The NH₃ gas plays critical roles on tuning the morphology. Previously, H₂ and CO gas are reported to assist the shape control of metallic nanocrystals. This is the first demonstration that NH₃ gas assists the Pt anisotropic growth. The halides also play important role in the synthetic strategy to regulate the formation of Pt NCs. As-made porous dendritic Pt NCs, especially when NH₄F is used as a regulating reagent, show superior catalytic activity for ORR compared with commercial Pt/C catalyst and other previously reported Pt-based NCs.

One-step synthesis of porous bimetallic PtCu nanocrystals with high electrocatalytic activity for methanol oxidation reaction

The design of porous bimetallic nanocrystals (NCs) is very important for electrochemical energy conversion. Herein, we report an aqueous solution method for one-step fabrication of porous PtCu NCs assembled by spatially interconnected arms in high yield by a simple ultrasonic treatment of the reaction mixture at room temperature. The proposed method, without the need for multi-step synthesis, high temperatures, and organic solvents, shows an obvious advantage of simplicity for the feasible synthesis of bimetallic PtCu NCs with a porous structure. The as-made porous PtCu NCs are highly active and durable catalysts for the methanol oxidation reaction due to their porous structure and bimetallic composition.

Electrochemical Co-Reduction Synthesis of AuPt Bimetallic Nanoparticles-Graphene Nanocomposites for Selective Detection of Dopamine in the Presence of Ascorbic Acid and Uric Acid

In this paper, AuPt bimetallic nanoparticles-graphene nanocomposites were obtained by electrochemical co-reduction of graphene oxide (GO), HAuCl₄ and H₂PtCl₆. The as-prepared AuPt bimetallic nanoparticles-graphene nanocomposites were characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and other electrochemical methods. The morphology and composition of the nanocomposite could be easily controlled by adjusting the HAuCl₄/H₂PtCl₆ concentration ratio. The electrochemical experiments showed that when the concentration ratio of HAuCl₄/H₂PtCl₆ was 1:1, the obtained AuPt bimetallic nanoparticles-graphene nanocomposite (denoted as Au1Pt1NPs-GR) possessed the highest electrocatalytic activity toward dopamine (DA). As such, Au1Pt1NPs-GR nanocomposites were used to detect DA in the presence of ascorbic acid (AA) and uric acid (UA) using the differential pulse voltammetry (DPV) technique and on the modified electrode, there were three separate DPV oxidation peaks with the peak potential separations of 177 mV, 130 mV and 307 mV for DA and AA, DA and UA, AA and UA, respectively. The linear range of the constructed DA sensor was from 1.6 μM to 39.7 μM with a detection limit of 0.1 μM (S/N = 3). The obtained DA sensor with good stability, high reproducibility and excellent selectivity made it possible to detect DA in human urine samples.

One-pot synthesis of a three-dimensional graphene aerogel supported Pt catalyst for methanol electrooxidation

A Pt/graphene aerogel hybrid catalyst synthesized via a facile one-pot solvothermal method exhibits 2.86 times higher activity for methanol electrooxidation than that of Pt/graphene and the stability is improved by 10% as compared with Pt/graphene.

Monolayer of close-packed Pt nanocrystals on a reduced graphene oxide (RGO) nanosheet and its enhanced catalytic performance towards methanol electrooxidation

A close-packed monolayer composed of (111)-orientated Pt nanocrystals was fabricated on reduced graphene oxide, exhibiting excellent electrocatalytic activity and stability towards methanol oxidation, ~3 times better mass activity than the commercial Pt/C.

Electrodeposition of PtNi bimetallic nanoparticles on three-dimensional graphene for highly efficient methanol oxidation

In the present work, platinum–nickel (PtNi) bimetallic nanoparticles with a uniform diameter of 40 nm were anchored onto a three-dimensional graphene (3DGN) by using the method of electrodeposition.

Amorphous PtNiP particle networks of different particle sizes for the electro-oxidation of hydrazine

Amorphous PtNiP particle networks with different particle sizes prepared via the reaction temperature control method showed high catalytic activity for hydrazine oxidation compared to the Pt and PtNi catalysts due to its porous, amorphous structure.

Ultrasensitive electrochemical assay of hydrogen peroxide and glucose based on PtNi alloy decorated MWCNTs

A electrochemical sensor based on PtNi/MWCNTs can detect hydrogen peroxide and glucose with wide linear range and high sensitivity.