Anodic growth of TiO2 nanopore arrays at various temperatures

Designing TiO2 Nanotubular Arrays with Au-CoOx Core-Shell Nanoparticles for Enhanced Photoelectrochemical Methanol and Lignin Oxidation

One-dimensional (1D) ordered TiO2 nanotubes exhibit exceptional charge transfer capabilities, making them suitable candidates for constructing visible-light-active photoanodes in selective PEC oxidation reactions. Herein, we employed a facile and easily scalable electrochemical method to fabricate Au-CoOx-deposited ordered TiO2 nanotubular array photoanodes. The improved visible light absorption capacity of TiO2-Au-CoOx, with unhampered 1D channels and the controlled integration of Au between TiO2 and CoOx, along with their synergistic interaction, have been identified as the most promising strategy for enhanced PEC performance, as evidenced by an IPCE of 3.7% at 450 nm. Furthermore, the robust interfacial charge transfer pathway from CoOx to the TiO2 surface via the Au mediator promotes the migration of photogenerated electrons and enables the accumulation of holes on the surface of CoOx. These holes are then efficiently utilized by oxidants such as methanol or lignin to generate value-added products, highlighting the potential of this system for advanced PEC applications.

Preparation and characterizations of antibacterial iodine-containing coatings on pure Ti

Iodine-containing coatings were prepared on pure Ti surfaces via electrochemical deposition to enhance their antibacterial properties. The factors influencing iodine content were analyzed using an orthogonal experiment. The electrochemically deposited samples were characterized using scanning electron microscopy with energy dispersive spectroscopy and X-ray photoelectron spectroscopy, and their antibacterial properties and cytotoxicity were evaluated. The results showed that changing the deposition time is an effective way to control the iodine content. The iodine content, coating thickness, and adhesion of the samples increased with deposition time. Iodine in the coatings mainly exists in three forms, which are I2, I3-, and pentavalent iodine. For samples with iodine-containing coatings, the antibacterial ratios against E. coli and S. aureus were greater than 90% and increased with increasing iodine content. Although the samples with iodine-containing coatings showed some inhibition of the proliferation of MC3T3-E1 cells, the cell viabilities were all higher than 80%, suggesting that iodine-containing coatings are biosafe.

Surface characterization and antibacterial efficiency of well-ordered TiO2 nanotube surfaces fabricated on titanium foams

Titanium (Ti)-based implants are not compatible enough due to their bio-inert character, insufficient antibacterial capabilities and stress-shielding problem for dental and orthopaedic implant applications. Thus, this work focused to fabricate, analyze and improve antibacterial properties titanium dioxide (TiO2) nanotube array surfaces on Ti foam by anodic oxidation (AO) process. The well-ordered nanotube arrays with approximately 75 nm were successfully fabricated at 40 V for 1 h on Ti foams. Ti and O were observed as major elements on AO-coated Ti foam surfaces. In addition, the existence of TiO2 structure was proved on AO-coated foam Ti surfaces. For potential dental and orthopedic implant application, in vitro antibacterial properties were investigated versus Staphylococcus aureus and Escherichia coli. For both bacteria, antibacterial properties of TiO2 nanotube surface were greater than bare Ti foam. The bacterial inhibition versus Staphylococcus aureus and Escherichia coli of TiO2 nanotube surfaces are improved as 53.3% and 69.4% compared to bare Ti foam.

Nanopore sensors for single molecular protein detection: Research progress based on computer simulations

As biological macromolecules, proteins are involved in important cellular functions ranging from DNA replication and biosynthesis to metabolic signalling and environmental sensing. Protein sequencing can help understand the relationship between protein function and structure, and provide key information for disease diagnosis and new drug design. Nanopore sensors are a novel technology to achieve the goal of label-free and high-throughput protein sequencing. In recent years, nanopore-based biosensors have been widely used in the detection and analysis of biomolecules such as DNA, RNA, and proteins. At the same time, computer simulations can describe the transport of proteins through nanopores at the atomic level. This paper reviews the applications of nanopore sensors in protein sequencing over the past decade and the solutions to key problems from a computer simulation perspective, with the aim of pointing the way to the future of nanopore protein sequencing.

Solid-State Nanopore Array: Manufacturing and Applications

Nanopore brings extraordinary properties for a variety of potential applications in various industrial sectors. Since manufacturing of solid-state nanopore is first reported in 2001, solid-state nanopore has become a hot topic in the recent years. An increasing number of manufacturing methods have been reported, with continuously decreased sizes from hundreds of nanometers at the beginning to ≈1 nm until recently. To enable more robust, sensitive, and reliable devices required by the industry, researchers have started to explore the possible methods to manufacture nanopore array which presents unprecedented challenges on the fabrication efficiency, accuracy and repeatability, applicable materials, and cost. As a result, the exploration of fabrication of nanopore array is still in the fledging period with various bottlenecks. In this article, a wide range of methods of manufacturing nanopores are summarized along with their achievable morphologies, sizes, inner structures for characterizing the main features, based on which the manufacturing of nanopore array is further addressed. To give a more specific idea on the potential applications of nanopore array, some representative practices are introduced such as DNA/RNA sequencing, energy conversion and storage, water desalination, nanosensors, nanoreactors, and dialysis.

Photoreduction of Cr(VI) in wastewater by anodic nanoporous Nb2O5 formed at high anodizing voltage and electrolyte temperature

In this study, nanoporous anodic film was produced by anodization of niobium, Nb in a fluoride ethylene glycol electrolyte. The effect of anodization voltage and electrolyte temperature was studied to find an optimum condition for circular, ordered, and uniform pore formation. The diameter of the pores was found to be larger when the applied voltage was increased from 20 to 80 V. The as-anodized porous film was also observed to comprise of nanocrystallites which formed due to high field-induced crystallization. The nanocrystallites grew into orthorhombic Nb₂O₅ after post-annealing treatment. The Cr(VI) photoreduction property of both the as-anodized and annealed Nb₂O₅ samples obtained using an optimized condition (anodization voltage: 60 V, electrolyte temperature: 70 °C) was compared. Interestingly, the as-anodized Nb₂O₅ film was found to display better photoreduction of Cr(VI) than annealed Nb₂O_5. However, in terms of stability, the annealed Nb₂O₅ presented high photocatalytic efficiency for each cycle whereas the as-anodized Nb₂O₅ showed degradation in photocatalytic performance when used continually.

Osseointegration Effect of Micro-Nano Implants Loaded With Kaempferol in Osteoporotic Rats

Objective: To investigate the effect of osseointegration of kaempferol loaded on the surface of micro-nanomorphic implants in ovariectomized rats.

Methods: Titanium flakes were polished to obtain the PT group, anodized and acid-etched to obtain the NT and WNT groups, loaded with kaempferol to obtain the KNT and KWNT groups, and spin-coated on chitosan-gelatin composite film to obtain the KNT-CG and KWNT-CG groups. In vitro experiments were performed to observe the physicochemical properties of the titanium tablets in each group through scanning electron microscopy and contact angle experiments. The cytotoxicity and drug release pattern were observed using CCK-8 and drug release assays. An osteoporosis rat model was established. Pure titanium implants were divided into PT, NT, WNT, KNT-CG, and KWNT-CG groups after the same treatment and used in the in vivo experiments and then implanted in the femur of mice in each group. After 4 weeks, all samples were collected for toluidine blue staining, micro-computed tomography scanning, and bone morphometry analysis to evaluate their osteogenic properties.

Results: According to scanning electron microscopy, the surface of the titanium flakes had a micro-nano morphology in the WNT group and the KNT and KWNT groups were functionally loaded with kaempferol. In CCK-8 and drug release experiments, the loaded kaempferol and gelatin composite membranes showed no significant toxic effects on cells. The drug release time in the KNT-CG and KWNT-CG groups was significantly longer than that in the KNT and KWNT groups, with the release time in the KWNT-CG group reaching 15 days. In vivo experiments micro-computed tomography and bone morphometry analysis showed that the osteoporosis model had been successfully constructed. The bone volume fraction around the implant increased. Toluidine blue staining showed new bone formation and a significantly increased number of bone trabeculae.

Conclusion: Kaempferol micro-nanocomposite coating improved the osseointegration ability of implants in osteoporotic rats.

Preparation of TiO2 Nanotube Array on the Pure Titanium Surface by Anodization Method and Its Hydrophilicity

In this work, a highly ordered TiO₂ nanotube array on pure titanium (Ti) was prepared by anodization. The effects of the applied voltage and anodization time on the microstructure of the TiO₂ nanotube arrays were investigated, and their hydrophilicity was evaluated by the water contact angle measurement. It was found that a highly ordered array of TiO₂ nanotubes can be formed on the surface of pure Ti by anodized under the applied voltage of 20 V and the anodization time in the range of 6-12 h, and the nanotube diameter and length can be regulated by anodization time. The as-prepared TiO₂ nanotubes were in an amorphous structure. After annealing at 550°C for 3 h, the amorphous TiO₂ can be transformed to the anatase TiO₂ through crystallization. The anatase TiO₂ array exhibited a greatly improved hydrophilicity, depending on the order degree of the array and the diameter of the nanotubes. The sample anodized at 20 V for 12 h and then annealed at 550°C for 3 h exhibited a superhydrophilicity due to its highly ordered anatase TiO₂ nanotube array with a tube diameter of 103.5 nm.

Debunking the essential effect of temperature and voltage on the current curve and the nanotube morphology

The formation mechanism of anodic TiO2 nanotubes remains to be unclear till now. Many researchers study the influence of temperatures above 0 °C instead of below 0 °C. Few papers before have explained the relationship between the current-time curve and the morphology of the nanotubes. In this study, the innovative 'oxygen bubble model' and the ionic current and electronic current theories were introduced to explain the growth of nanotubes below 0 °C. The length of anodic TiO2 nanotubes at 15 °C, 0 °C, -10 °C were 1.28 μm, 0.93 μm and 0.21 μm, respectively, but the diameter of anodic TiO2 nanotubes was almost the same, at about 164 nm. When the temperature was low, the magnitude of electronic current and the ionic current was small, the mold effect was weak and nanotubes could not be formed. At the same time, this study shows that the dissolution reaction of the field-assisted solution theory has no electron gain or loss, and it has nothing to do with the current, which negates the field-assisted dissolution theory. A novel two-step anodization was used to verify the conclusion. It was found that nanotubes could be obtained when the anodizing current was decreasing or increasing. Also, ginseng-shaped nanotubes are formed at a particular voltage sequence. Based on the 'oxygen bubble model' and the ionic current and electronic current theories, the formation process of nanotubes of two-step anodization is explained clearly.

Two-dimensional materials as solid-state nanopores for chemical sensing

Solid-state nanopores as a versatile alternative to biological nanopores have grown tremendously over the last two decades. They exhibit unique characteristics including mechanical robustness, thermal and chemical stability, easy modifications and so on. Moreover, the pore size of a solid-state nanopore could be accurately controlled from sub-nanometers to hundreds of nanometers based on the experimental requirements, presenting better adaptability than biological nanopores. Two-dimensional (2D) materials with single layer thicknesses and highly ordered structures have great potential as solid-state nanopores. In this perspective, we introduced three kinds of substrate-supported 2D material solid-state nanopores, including graphene, MoS2 and MOF nanosheets, which exhibited big advantages compared to traditional solid-state nanopores and other biological counterparts. Besides, we suggested the fabrication and modulation of 2D material solid-state nanopores. We also discussed the applications of 2D materials as solid-state nanopores for ion transportation, DNA sequencing and biomolecule detection.

Evidence of oxygen bubbles forming nanotube embryos in porous anodic oxides

Anodic TiO2 nanotubes have been studied widely for two decades because of their regular tubular structures and extensive applications. However, the formation mechanism of anodic TiO2 nanotubes remains unclear, because it is difficult to find convincing evidence for popular field-assisted dissolution or field-assisted injection theories and the oxygen bubble model. Here, in a bid to find direct evidence that oxygen bubbles form nanotube embryos, a new method is applied to handle this challenge. Before nanotube formation, a dense cover layer was formed to make nanotubes grow more slowly. Many completely enclosed nanotube embryos formed by oxygen bubbles were found beneath the dense cover layer for the first time. The formation of these enclosed and hollow gourd-shaped embryos is convincing enough to prove that the nanotubes are formed by the oxygen bubble mold, similar to inflating a football, rather than by field-assisted dissolution. Based on the 'oxygen bubble model' and ionic current and electronic current theories, the formation and growth process of nanotube embryos is explained clearly for the first time. These interesting findings indicate that the 'oxygen bubble model' and ionic current and electronic current theories also apply to anodization of other metals.

Electrochemical Oxidation of Ti15Mo Alloy-The Impact of Anodization Parameters on Surface Morphology of Nanostructured Oxide Layers

It is well-known that the structure and composition of the material plays an important role in the processes occurring at the surface. In this paper, a surface morphology of nanostructured oxide layers electrochemically grown on Ti15Mo, tuned by applying different anodization parameters, was investigated in detail. The one-step anodization of Ti15Mo alloy was performed at room temperature in an ethylene glycol-based electrolyte containing 0.11 M NH4F and 1.11 M H2O. Different anodization times (ranging from 5 to 60 min) and applied potentials (40-100 V) were tested, and the surface morphology, elemental content, and crystalline structure were monitored by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), and X-ray diffractometry (XRD), respectively. The results showed that contrary to the multistep anodization of titanium foil, the surface morphology of anodic oxide obtained via the one-step process contains the nanoporous outer layer covering the nanotubular structure. What is more, the pore diameter (Dp) and interpore distance (Dint) of such layers exhibit different trends than those observed for anodization of pure titanium. In particular, at a certain potential range, a decrease in both Dp and Dint with increasing potential was observed. However, independently on the used anodization conditions, the elemental content of oxide layers remained similar, showing the amount of molybdenum at c.a. 15 wt.%. Finally, the amorphous nature of as-anodized layers was confirmed, and their optical band-gap was determined from the diffuse reflectance UV-Vis spectra. It was found that Eg is tunable to some extent by changing the anodizing potential. However, further thermal treatment in air at 400 °C resulted in the anatase phase formation that was accompanied by a significant Eg reduction. Therefore, we believe that the presented results will greatly contribute to the understanding of anodic formation of nanostructured functional oxide layers with tunable properties that can be applied in various fields.

Fabrication and Applications of Solid-State Nanopores

Nanopores fabricated from synthetic materials (solid-state nanopores), platforms for characterizing biological molecules, have been widely studied among researchers. Compared with biological nanopores, solid-state nanopores are mechanically robust and durable with a tunable pore size and geometry. Solid-state nanopores with sizes as small as 1.3 nm have been fabricated in various films using engraving techniques, such as focused ion beam (FIB) and focused electron beam (FEB) drilling methods. With the demand of massively parallel sensing, many scalable fabrication strategies have been proposed. In this review, typical fabrication technologies for solid-state nanopores reported to date are summarized, with the advantages and limitations of each technology discussed in detail. Advanced shrinking strategies to prepare nanopores with desired shapes and sizes down to sub-1 nm are concluded. Finally, applications of solid-state nanopores in DNA sequencing, single molecule detection, ion-selective transport, and nanopatterning are outlined.

A Review on the Electrochemically Self-organized Titania Nanotube Arrays: Synthesis, Modifications, and Biomedical Applications

Titania nanotubes grown by anodic oxidation have intrigued the material science community by its many unique and potential properties, and the synthesis of technology is merging to its mature stage. The present review will focus on TiO2 nanotubes grown by self-organized electrochemical anodization from Ti metal substrate, which critically highlights the synthesis of this type of self-organized titania nanotube layers and the means to influence the size, shape, the degree of order, and crystallized phases via adjusting the anodization parameters and the subsequent thermal annealing. The relationship between dimensions and properties of the anodic TiO2 nanotube arrays will be presented. The latest progress and significance of the research on formation mechanism of anodic TiO2 nanotubes are briefly discussed. Besides, we will show the most promising applications reported recently in biomedical directions and modifications carried out by doping, surface modification, and thermal annealing toward improving the properties of anodically formed TiO2 nanotubes. At last, some unsolved issues and possible future directions of this field are indicated.

Fabrication of Uniform Nanoporous Oxide Layers on Long Cylindrical Zircaloy Tubes by Anodization Using Multi-Counter Electrodes

We have presented a method to prepare a uniform anodic nanoporous oxide film on the surface of a cylindrical zircaloy (Zr) tube. The distribution of the electric field around the Zr tube determines the distribution of the thickness of the anodic nanoporous oxide film. The electric field generated when a cylindrical Zr tube is electrochemically anodized was simulated by using commercial code COMSOL. When four Pt wires were used as counter electrodes, a uniform electric field was achieved with minimal use of Pt. Based on the simulation results, a cylindrical Zr tube was anodized and the distribution of the thickness of the anodic nanoporous oxide layer was measured by FESEM. Also, mass production of uniform nanoporous anodic oxide films was possible by symmetrically arranging the zircaloy tubes and Pt wires.

Simulation of anodizing current–time curves and the morphology evolution of TiO2 nanotubes obtained in phosphoric electrolytes

The simulation and separation of anodizing current density–time curves obtained in mixed electrolytes.

Controlled Fabrication of Nanoporous Oxide Layers on Zircaloy by Anodization

We have presented a mechanism to explain why the resulting oxide morphology becomes a porous or a tubular nanostructure when a zircaloy is electrochemically anodized. A porous zirconium oxide nanostructure is always formed at an initial anodization stage, but the degree of interpore dissolution determines whether the final morphology is nanoporous or nanotubular. The interpore dissolution rate can be tuned by changing the anodization parameters such as anodization time and water content in an electrolyte. Consequently, porous or tubular oxide nanostructures can be selectively fabricated on a zircaloy surface by controlling the parameters. Based on this mechanism, zirconium oxide layers with completely nanoporous, completely nanotubular, and intermediate morphologies between a nanoporous and a nanotubular structure were controllably fabricated.

Theoretical derivation of anodizing current and comparison between fitted curves and measured curves under different conditions

Anodic TiO2 nanotubes have been studied extensively for many years. However, the growth kinetics still remains unclear. The systematic study of the current transient under constant anodizing voltage has not been mentioned in the original literature. Here, a derivation and its corresponding theoretical formula are proposed to overcome this challenge. In this paper, the theoretical expressions for the time dependent ionic current and electronic current are derived to explore the anodizing process of Ti. The anodizing current-time curves under different anodizing voltages and different temperatures are experimentally investigated in the anodization of Ti. Furthermore, the quantitative relationship between the thickness of the barrier layer and anodizing time, and the relationships between the ionic/electronic current and temperatures are proposed in this paper. All of the current-transient plots can be fitted consistently by the proposed theoretical expressions. Additionally, it is the first time that the coefficient A of the exponential relationship (ionic current j(ion) = A exp(BE)) has been determined under various temperatures and voltages. And the results indicate that as temperature and voltage increase, ionic current and electronic current both increase. The temperature has a larger effect on electronic current than ionic current. These results can promote the research of kinetics from a qualitative to quantitative level.

Novel nitrogen precursors for electrochemically driven doping of titania nanotubes exhibiting enhanced photoactivity

A simple electrochemical method was elaborated for the modification of titania nanotubes with nitrogen atoms using different dopant precursors.

Enhanced photoelectrochemical and photocatalytic performance of iodine-doped titania nanotube arrays

The paper discusses the synthesis and performance of iodine doped titania nanotube arrays exhibited under irradiation.