Synthesis, electrochemical properties and inhibition performance of water-soluble self-doped oligoaniline derivative

Injectable dual-network hyaluronic acid nanocomposite hydrogel for prevention of postoperative breast cancer recurrence and wound healing

High locoregional recurrence rates and potential wound infections remain a significant challenge for postoperative breast cancer patients. Herein, we developed a dual-network hyaluronic acid (HA) nanocomposite hydrogel composed of herring sperm DNA (hsDNA) bridged methacrylated HA (HAMA) and FeMg-LDH-ppsa nanohybrid chelated catechol-modified HA (HADA) for the prevention of breast cancer recurrent, anti-infection, and promoting wound healing. Dynamic reversible hsDNA cross-linking combined with metal-catechol chelating renders the hydrogel injectability, rapid self-healing ability, and enhanced mechanical properties. FeMg-LDH-ppsa nanohybrids obtained by in situ polymerization of aniline derivatives in the FeMg-LDH interlayer exhibited excellent photothermal effect. Upon near-infrared (NIR) irradiation, the photothermal effect mediated by FeMg-LDH-ppsa can unwind the hsDNA duplex, enabling the controlled release of preloaded DOX for synergistic photothermal-chemotherapy antitumor. Meanwhile, the catechol-metal (Fe3+/Mg2+) moieties in the hydrogel enhanced tissue adhesion and exhibited intrinsic antimicrobial and bioactive properties, which in combination with the NIR-assisted photothermal effect, significantly accelerated infected wound healing through sterilizing microorganisms, alleviating inflammation, re-epithelialization, and angiogenesis. Overall, this multifunctional hydrogel represented a promising candidate in postoperative wound management for simultaneous tumor elimination, antiinfection, and wound repair.

Fabrication and desired properties of conductive hydrogel dressings for wound healing

Conductive hydrogels are platforms recognized as constituting promising materials for tissue engineering applications. This is because such conductive hydrogels are characterized by the inherent conductivity properties while retaining favorable biocompatibility and mechanical properties. These conductive hydrogels can be particularly useful in enhancing wound healing since their favorable conductivity can promote the transport of essential ions for wound healing via the imposition of a so-called transepithelial potential. Other valuable properties of these conductive hydrogels, such as wound monitoring, stimuli-response etc., are also discussed in this study. Crucially, the properties of conductive hydrogels, such as 3D printability and monitoring properties, suggest the possibility of its use as an alternative wound dressing to traditional dressings such as bandages. This review, therefore, seeks to comprehensively explore the functionality of conductive hydrogels in wound healing, types of conductive hydrogels and their preparation strategies and crucial properties of hydrogels. This review will also assess the limitations of conductive hydrogels and future perspectives, with an emphasis on the development trend for conductive hydrogel uses in wound dressing fabrication for subsequent clinical applications.

Mediation of water-soluble oligoaniline by phenol in the aniline-persulfate system under alkaline conditions

Although synthesis of oligoaniline (OANI) by persulfate and aniline has been investigated in the recent years, the impact of phenol on the synthesized soluble OANI is still not clear. In this study, our results indicate that phenol and pH mediate the production of the blue water-soluble OANI (OANI_blue) in the reaction between sodium persulfate (SPS) and aniline under alkaline conditions, and the yields of OANI_blue increase with increasing concentrations of phenol and pH values. Quenching experiments rule out the contributions of SO₄˙^- and ˙OH to aniline oxidation and imply that the non-radical activation of SPS is an important pathway in the formation of OANI_blue. MALDI-TOF-MS analysis indicates that phenol apparently inhibits the polymerization degree of aniline in that the molecular weights of OANI_blue gradually decrease from 1586.4 to 684.6 when phenol is increased from 0 to 2.0 mM. FTIR and Raman analyses confirm the structure of aniline oligomers in OANI_blue and indicate that phenol inhibits the phenazine-like structure in OANI_blue and facilitates the transformation of benzenoid rings to quinoid rings in the oxidation products. However, simultaneous activation of SPS by phenol and aniline is likely to occur in the reaction system with the formation of PhNH˙, as indicated by DFT calculations. The high scavenging reactivity of phenol towards both PhNH₂˙⁺ and PhNH˙ implies that PhNH₂˙⁺ and PhNH˙ are not the intermediates in the formation of OANI_blue. DFT calculations also reveal that apart from the one-electron transfer pathway between aniline and SPS, the two-electron transfer pathway is also likely to occur in the presence of phenol, resulting in the formation of PhNH⁺/PhN˙˙ without producing PhNH₂˙⁺ and PhNH˙. The produced PhNH⁺/PhN˙˙ intermediates then couple with aniline, PhNH⁺, aminophenyl sulfate and its hydrolysate to form dimers, trimers, oligomers, and eventually OANI_blue. This study not only describes a novel method to prepare water-soluble OANI, but also gives new insight on the importance of phenol in the production of OANI_blue.

Linear and star-shaped π-conjugated oligoanilines: a review on molecular design in syntheses and properties

Molecular Design and Synthesis of Linear and Star-shaped π-conjugated Oligoanilines with reversible optoelectrochemical properties.

A novel Au/electroactive poly(amic acid) composite as an effective catalyst for p-nitrophenol reduction

A Au/electroactive poly(amic acid) (Au/EPAA) composite was synthesized and characterized, and its catalytic ability was evaluated. EPAA was synthesized via oxidative coupling polymerization and Au nanoparticles were anchored to the amino and carboxyl groups. The Au/EPAA composite was characterized via X-ray diffraction analysis, X-ray photoelectron spectroscopy, and scanning electron microscopy, which confirmed that the Au nanoparticles were well dispersed on the EPAA surface. p-Nitrophenol was reduced to p-aminophenol within 5 min at room temperature, with a rate constant of 0.84 min⁻¹. Cycling measurements showed that the Au/EPAA composite achieved higher than 92% conversion. The Au/EPAA composite showed excellent performance and stability as a catalyst for the reduction of p-nitrophenol to p-aminophenol.

The Au/EPAA composite demonstrated excellent performance and stability as a catalyst for the reduction of p-nitrophenol to p-aminophenol.

A Novel Electroactive Imide Oligomer and Its Application in Anticorrosion Coating

A novel aniline tetramer (AT) capped electroactive imide oligomer (EIO) for metal corrosion protection was successfully synthesized in this study. The chemical structure of the EIO was characterized by liquid chromatography-mass spectrometry and Fourier-transform infrared spectroscopy. Furthermore, the redox behavior of EIO was identified using electrochemical cyclic voltammetry studies. An EIO coated on a cold-rolled steel (CRS) electrode was found to possess superior corrosion resistance to polyimide (PI) on a series of electrochemical corrosion measurements in 3.5 wt.% NaCl solution over an extended period (30 days). The mechanism for the advanced corrosion protection of the PI coating on the CRS electrode could be attributed to the redox catalytic capabilities of the AT units present in the EIO. These capabilities may induce the formation of passive metal oxide layers on the CRS electrode. Scanning electron microscopy and X-ray photoelectron spectroscopy were used to analyze the surface condition of the CRS after the corrosion test. EIO- and PI-coated electrodes were identified by a series of electrochemical measurements, including corrosion potential (E_corr), polarization resistance (R_p), and corrosion current (I_corr) measurements, along with electrochemical impedance spectroscopy (EIS).

Oligoaniline-based conductive biomaterials for tissue engineering

The science and engineering of biomaterials have improved the human life expectancy. Tissue engineering is one of the nascent strategies with an aim to fulfill this target. Tissue engineering scaffolds are one of the most significant aspects of the recent tissue repair strategies; hence, it is imperative to design biomimetic substrates with suitable features. Conductive substrates can ameliorate the cellular activity through enhancement of cellular signaling. Biocompatible polymers with conductivity can mimic the cells' niche in an appropriate manner. Bioconductive polymers based on aniline oligomers can potentially actualize this purpose because of their unique and tailoring properties. The aniline oligomers can be positioned within the molecular structure of other polymers, thus painter acting with the side groups of the main polymer or acting as a comonomer in their backbone. The conductivity of oligoaniline-based conductive biomaterials can be tailored to mimic the electrical and mechanical properties of targeted tissues/organs. These bioconductive substrates can be designed with high mechanical strength for hard tissues such as the bone and with high elasticity to be used for the cardiac tissue or can be synthesized in the form of injectable hydrogels, particles, and nanofibers for noninvasive implantation; these structures can be used for applications such as drug/gene delivery and extracellular biomimetic structures. It is expected that with progress in the fields of biomaterials and tissue engineering, more innovative constructs will be proposed in the near future. This review discusses the recent advancements in the use of oligoaniline-based conductive biomaterials for tissue engineering and regenerative medicine applications.

STATEMENT OF SIGNIFICANCE

The tissue engineering applications of aniline oligomers and their derivatives have recently attracted an increasing interest due to their electroactive and biodegradable properties. However, no reports have systematically reviewed the critical role of oligoaniline-based conductive biomaterials in tissue engineering. Research on aniline oligomers is growing today opening new scenarios that expand the potential of these biomaterials from "traditional" treatments to a new era of tissue engineering. The conductivity of this class of biomaterials can be tailored similar to that of tissues/organs. To the best of our knowledge, this is the first review article in which such issue is systematically reviewed and critically discussed in the light of the existing literature. Undoubtedly, investigations on the use of oligoaniline-based conductive biomaterials in tissue engineering need further advancement and a lot of critical questions are yet to be answered. In this review, we introduce the salient features, the hurdles that must be overcome, the hopes, and practical constraints for further development.

Self-Assembly of a Functional Oligo(Aniline)-Based Amphiphile into Helical Conductive Nanowires

A tetra(aniline)-based cationic amphiphile, TANI-NHC(O)C5H10N(CH3)3(+)Br(-) (TANI-PTAB) was synthesized, and its emeraldine base (EB) state was found to self-assemble into nanowires in aqueous solution. The observed self-assembly is described by an isodesmic model, as shown by temperature-dependent UV-vis investigations. Linear dichroism (LD) studies, combined with computational modeling using time-dependent density functional theory (TD-DFT), suggests that TANI-PTAB molecules are ordered in an antiparallel arrangement within nanowires, with the long axis of TANI-PTAB arranged perpendicular to the nanowire long axis. Addition of either S- or R- camphorsulfonic acid (CSA) to TANI-PTAB converted TANI to the emeraldine salt (ES), which retained the ability to form nanowires. Acid doping of TANI-PTAB had a profound effect on the nanowire morphology, as the CSA counterions' chirality translated into helical twisting of the nanowires, as observed by circular dichroism (CD). Finally, the electrical conductivity of CSA-doped helical nanowire thin films processed from aqueous solution was 2.7 mS cm(-1). The conductivity, control over self-assembled 1D structure and water-solubility demonstrate these materials' promise as processable and addressable functional materials for molecular electronics, redox-controlled materials and sensing.