Effect of chitosan on distearoylphosphatidylglycerol films at air/water and liquid/liquid interfaces

The Synthesis of Green Palladium Catalysts Stabilized by Chitosan for Hydrogenation

The proposed paper describes a simple and environmentally friendly method for the synthesis of three-component polymer-inorganic composites, which includes the modification of zinc oxide or montmorillonite (MMT) with chitosan (CS), followed by the immobilization of palladium on the resulting two-component composites. The structures and properties of the obtained composites were characterized by physicochemical methods (IRS, TEM, XPS, SEM, EDX, XRD, BET). Pd-CS species covered the surface of inorganic materials through two different mechanisms. The interaction of chitosan polyelectrolyte with zinc oxide led to the deprotonation of its amino groups and deposition on the surface of ZnO. The immobilization of Pd on CS/ZnO occurred by the hydrolysis of [PdCl4]2-, followed by forming PdO particles by interacting with amino groups of chitosan. In the case of CS/MMT, protonated amino groups of CS interacted with negative sites of MMT, forming a positively charged CS/MMT composite. Furthermore, [PdCl4]2- interacted with the -NH3+ sites of CS/MMT through electrostatic force. According to TEM studies of 1%Pd-CS/ZnO, the presence of Pd nanoclusters composed of smaller Pd nanoparticles of 3-4 nm in size were observed on different sites of CS/ZnO. For 1%Pd-CS/MMT, Pd nanoparticles with sizes of 2 nm were evenly distributed on the support surface. The prepared three-component CS-inorganic composites were tested through the hydrogenation of 2-propen-1-ol and acetylene compounds (phenylacetylene, 2-hexyn-1-ol) under mild conditions (T-40 °C, PH2-1 atm). It was shown that the efficiency of 1%Pd-CS/MMT is higher than that of 1%Pd-CS/ZnO, which can be explained by the formation of smaller Pd particles that are evenly distributed on the support surface. The mechanism of 2-hexyn-1-ol hydrogenation over an optimal 1%Pd-CS/MMT catalyst was proposed.

Preparation and Surface Characterization of Chitosan-Based Coatings for PET Materials

Poly(ethylene terephthalate)-PET-is one of the most frequently used polymers in biomedical applications. Due to chemical inertness, PET surface modification is necessary to gain specific properties, making the polymer biocompatible. The aim of this paper is to characterize the multi-component films containing chitosan (Ch), phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), immunosuppressant cyclosporine A (CsA) and/or antioxidant lauryl gallate (LG) which can be utilized as a very attractive material for developing the PET coatings. Chitosan was employed owing to its antibacterial activity and also its ability to promote cell adhesion and proliferation favorable for tissue engineering and regeneration purposes. Moreover, the Ch film can be additionally modified with other substances of biological importance (DOPC, CsA and LG). The layers of varying compositions were prepared using the Langmuir-Blodgett (LB) technique on the air plasma-activated PET support. Then their nanostructure, molecular distribution, surface chemistry and wettability were determined by atomic force microscopy (AFM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), X-ray photoelectron spectroscopy (XPS), contact angle (CA) measurements and the surface free energy and its components' determination, respectively. The obtained results show clearly the dependence of the surface properties of the films on the molar ratio of components and allow for a better understanding of the coating organization and mechanisms of interactions at the molecular level both inside the films and between the films and the polar/apolar liquids imitating the environment of different properties. The organized layers of this type can be helpful in gaining control over the surface properties of the biomaterial, thus getting rid of the limitations in favor of increased biocompatibility. This is a good basis for further investigations on the correlation of the immune system response to the presence of biomaterial and its physicochemical properties.

Interaction mechanism of chitosan oligomers in pure water with cell membrane models studied by SFG vibrational spectroscopy

Chitosan is a versatile and biocompatible cationic antimicrobial polymer obtained from sustainable sources that is effective against a wide range of microorganisms. Although it is soluble only at low pH, chitosan oligomers (ChitO) are soluble in pure water and thus more appropriate for antibacterial applications. Although there is a vast literature on chitosan's antimicrobial activity, the molecular details of its interaction with biomembranes remain unclear. Here we investigate these molecular interactions by resorting to phospholipid Langmuir films (zwitterionic DPPC and anionic DPPG) as simplified membrane models (for mammalian and bacterial membranes, respectively), and using SFG vibrational spectroscopy to probe lipid tail conformation, headgroup dynamics and interfacial water orientation. For comparison, we also investigate the interactions of another simple cationic antimicrobial polyelectrolyte, poly(allylamine) hydrochloride - PAH. By forming the lipid films over the polyelectrolyte solutions, we found that both have only a very small interaction with DPPC, but PAH adsorption is able to invert the interfacial water orientation (membrane potential). This might explain why ChitO is compatible with mammalian cells, while PAH is toxic. In contrast, their interaction with DPPG films is much stronger, even more so for ChitO, with both insertion within the lipid film and interaction with the oppositely charged headgroups. Again, PAH adsorption inverts the membrane potential, while ChitO does not. Finally, ChitO interaction with DPPG is weaker if the antimicrobial is injected underneath a pre-assembled Langmuir film, and its interaction mode depends on the time interval between end of film compression and ChitO injection. These differences between ChitO and PAH effects on the model membranes highlight the importance of molecular structure and intermolecular interactions for their bioactivity, and therefore this study may provide insights for the rational design of more effective antimicrobial molecules.

Thermodynamics and In-Plane Viscoelasticity of Anionic Phospholipid Membranes Modulated by an Ionic Liquid

This article presents the effects of an imidazolium-based ionic liquid (IL) on the thermodynamics and in-plane viscoelastic properties of model membranes of anionic phospholipids. The negative Zeta potential of multilamellar vesicles of 14 carbon lipid 1,2-dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DMPG) is observed to reduce due to the presence of few mole % of an IL 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]). The effect was found to be stronger on enhancing the chain length of the lipid. The surface pressure-area isotherms of lipid monolayer formed at air-water interface are modified by the IL reducing the effective area per molecule. Further, the equilibrium elasticity of the film is altered depending upon the thermodynamic phase of the lipids. While the presence of the IL in the DMPG lipid makes it ordered in the gel phase by reducing the entropy, the effect is opposite in the fluid phase. The in-plane viscoelastic parameters of the lipid film is quantified by dilation rheology using the oscillatory barriers of a Langmuir trough. Even though the low chain lipid DMPG does not show any effect of IL on its storage and loss moduli, the longer chain lipids exhibit a prominent effect in the liquid extended (LE) phase. Further, the dynamic response of the lipid film is found to be distinctly different in the liquid condensed (LC) phase from that of the LE phase.

Interfacial behaviour and quantitative analysis of hexadecyl phosphocholine drug at a polarized liquid/liquid interface

The interfacial behaviour of the amphiphilic drug hexadecyl phosphocholine (HePC, also called miltefosine) was analysed by cyclic voltammetry applied at the water/1,2-dichloroethane interface. HePC is the only oral drug currently approved for the treatment of visceral, mucosal  and cutaneous leishmaniasis. Because of its amphiphilic character, it can interact with biological membranes, solubilizing their compounds and leading to cell disruption. These interactions are responsible for its side effects and toxicity; therefore, HePC quantification in biological fluids and pharmaceutical preparations is extremely important. However, the lack of a chromophore in its structure prevents its spectroscopic determination. For this reason, the main challenge of this work was to propose an electroanalytical method for the quantification of this drug, which constitutes a simpler alternative than liquid chromatography-tandem mass spectrometry already reported. With this aim, in the first part of this work, the mechanism of the electrochemical process occurring after polarizing the interface was studied. By varying the experimental conditions, it was possible to determine that in a first step, at open circuit or at low potential values, HePC spontaneously adsorbed to the interface. Later, as the potential increased, the transfer of the anions present in the organic phase towards the aqueous side of the interface, where the HePC polar head groups were present, occurred thus forming adsorbed "ion pairs" and producing an increase in positive current. Subsequently, in the negative sweep, the "ion pairs" dissociated and desorbed giving rise to a negative peak. In this way, both negative and positive currents were considered useful for quantitative purposes. In the second part of this work, an appropriate experimental procedure was designed and proposed as a quantitative methodology for the HePC determination, which consisted of cleaning the interface and controlling the time at open circuit, followed by the voltammetric analysis. A linear response of both, positive or negative, peak currents with drug concentration was obtained within an acceptable range, providing a simple solution for the HePC quantification problem. Future studies will be carried out to evaluate the quantification and selectivity in real matrices containing polymer micelles working as HePC nanocarriers with the aim of avoiding the adverse effects of HePC when it is orally or intravenously administered.

Interaction of chitosan derivatives with cell membrane models in a biologically relevant medium

HYPOTHESIS

The interaction of chitosan, a natural biopolymer with various biomedical applications, with lipid Langmuir films has been widely investigated as a simple model for cell membranes. However, to ensure polymer solubility, up to now only acidic subphases with pH significantly below biological fluids have been used. To increase the biological significance of these investigations, here we evaluated the effects of two chitosan derivatives (low molecular weight - CH, and positively charged - CH-P40) on phospholipid films (either zwitterionic DPPC or anionic DPPG) using phosphate buffered saline solutions (PBS) as a subphase.

EXPERIMENTS

Surface pressure - area (π-A) isotherms were used to evaluate the expansion and changes in film elasticity, while Sum-Frequency Generation (SFG) vibrational spectroscopy provided information about the chain conformation of lipids.

FINDINGS

It was found that chitosans caused a small expansion of the DPPC film by its insertion within the monolayer. In contrast, they distinctly expanded DPPG monolayers by both chitosan insertion within the lipid monolayer and by interacting with the anionic head group. Therefore, PBS buffer can be used as a subphase for more biologically relevant studies of chitosan interactions with Langmuir films, shedding light on why chitosan is antibacterial but not toxic to mammals, as the interaction mechanism depends on lipid headgroup charge.

Cospreading of Anionic Phospholipids with Peptides of the Structure (KX)4K at the Air-Water Interface: Influence of Lipid Headgroup Structure and Hydrophobicity of the Peptide on Monolayer Behavior

Mixtures of anionic phospholipids (PG, PA, PS, and CL) with cationic peptides were cospread from a common organic solvent at the air-water interface. The compression of the mixed film was combined with epifluorescence microscopy or infrared reflection adsorption spectroscopy (IRRAS) to gain information on the interactions of the peptide with the different lipids. To evaluate the influence of the amino acid X of peptides with the sequence (KX)₄K on the binding, 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) was mixed with different peptides with increasing hydrophobicity of the uncharged amino acid X. The monolayer isotherms of DPPG/(KX)₄K mixtures show an increased area for the lift-off due to incorporation of the peptide into the liquid-expanded (LE) state of the lipid. The surface pressure for the transition from LE to the liquid-condensed (LC) state is slightly increased for peptides with amino acids X with moderate hydrophobicity. For the most hydrophobic peptide (KL)₄K two plateaus are seen at a charge ratio PG to K of 5:1, and a strongly increased transition pressure is observed for a charge ratio of 1:1. Epifluorescence microscopy images and infrared spectroscopy show that the lower plateau corresponds to the LE-LC phase transition of the lipid. The upper plateau is connected with a squeeze-out of the peptide into the subphase. To test the influence of the lipid headgroup structure on peptide binding (KL)₄K was cospread with different anionic phospholipids. The shift of the isotherm to larger areas for lift-off and to higher surface pressure for the LE-LC phase transition was observed for all tested anionic lipids. Epifluorescence microscopy reveals the formation of LC domains with extended filaments indicating a decrease in line tension due to accumulation of the peptides at the LC-domain boundaries. This effect depends on the size of the headgroup of the anionic phospholipid.

Co-assembly in chitosan-surfactant mixtures: thermodynamics, structures, interfacial properties and applications

In this review, different aspects characterizing chitosan-surfactant mixtures are summarized and compared. Chitosan is a bioderived cationic polysaccharide that finds wide-ranged applications in various field, e.g., medical or food industry, in which synergistic effects with surfactant can play a fundamental role. In particular, the behavior of chitosan interacting with strong and weak anionic, nonionic as well as cationic surfactants is reviewed. We put a focus on oppositely charged systems, as they exhibit the most interesting features. In that context, we discuss the thermodynamic description of the interaction and in particular the structural changes as they occur as a function of the mixed systems and external parameters. Moreover, peculiar properties of chitosan coated phospholipid vesicles are summarized. Finally, their co-assembly at interfaces is briefly reviewed. Despite the behavior of the mentioned systems might strongly differ, resulting in a high variety of properties, few general rules can be pointed out which improve the understanding of such complex systems.

Interaction of magnetic nanoparticles with phospholipid films adsorbed at a liquid/liquid interface

The presence of Co magnetic nanoparticles in phospholipid films decreases their structuration and increases their permeability to ion transfer.

The effect of the functionalization and molecular weight of cationic dextran polyelectrolytes on their electrochemical behavior at the water/1,2-dichloroethane interface

The functionalization and molecular weight of cationic dextran polyelectrolytes have an impact on their adsorption and electrochemical behavior at the water/1,2-dichloroethane interface.