A novel electrochemical biosensor for label-free detection of uracil DNA glycosylase activity based on enzyme-catalyzed removal of uracil bases inducing strand release

Transcriptionally amplified synthesis of fluorogenic RNA aptamers for label-free DNA glycosylase assay

We demonstrate for the first time the utilization of fluorogenic RNA aptamers for label-free uracil-DNA glycosylase (UDG) assay. Through rationally engineering the transcription machine with dU substitution, this assay requires only a single probe to simultaneously sense and amplify the UDG signal, achieving a low detection limit of 6.3 × 10^-6 U mL^-1. Moreover, it can be applied for screening UDG inhibitors and measuring endogenous UDG activity in different cells.

Measurement of uracil-DNA glycosylase activity by matrix assisted laser desorption/ionization time-of-flight mass spectrometry technique

Uracil-DNA glycosylase (UDG) is a highly conserved DNA repair enzyme that acts as a key component in the base excision repair pathway to correct hydrolytic deamination of cytosine making it critical to genome integrity in living organisms. We report here a non-labeled, non-radio-isotopic and very specific method to measure UDG activity. Oligodeoxyribonucleotide duplex containing a site-specific G:U mismatch that is hydrolyzed by UDG then subjected to Matrix Assisted Laser Desorption/Ionization time-of-flight mass spectrometry analysis. A protocol was developed to maintain the AP product in DNA without strand break then the cleavage of uracil was identified by the mass change from uracil substrate to AP product. From UDG kinetic analysis, for G:U substrate the K_m is 50 nM, V_max is 0.98 nM/s and K_cat = 9.31 s^-1. The method was applied to uracil glycosylase inhibitor measurement with an IC₅₀ value of 7.6 pM. Single-stranded and double-stranded DNAs with uracil at various positions of the substrates were also tested for UDG activity albeit with different efficiencies. The simple, rapid, quantifiable, scalable and versatile method has potential to be the reference method for monofunctional glycosylase measurement, and can also be used as a tool for glycosylase inhibitors screening.

One-step G-quadruplex-based fluorescence resonance energy transfer sensing method for ratiometric detection of uracil-DNA glycosylase activity

Uracil-DNA glycosylase (UDG) is a crucial enzyme in base excision repair (BER) pathway. It can repair the uracil-induced DNA lesions and maintain the integrity of genome. In this paper, we developed a facile and ratiometric strategy for UDG activity detection using fluorescence resonance energy transfer (FRET). One double-stranded DNA (dsDNA) substrate consisting of strand 1 (dual-fluorescent dye-modified G-quadruplex sequence single-stranded DNA (ssDNA)), carboxyfluorescein (FAM) acted as donor and tetramethylrhodamine (TAMRA) as acceptor) and strand 2 (the complementary sequence of strand 1 containing three mismatched bases and three uracil bases) was introduced. When the UDG-catalyzed uracil is removed from dsDNA, the thermo-stability of dsDNA is decreased and the dual-fluorescent dye-modified G-quadruplex sequence ssDNA is released. Then, the ssDNA transforms into a G-quadruplex comformation, which brings the labeled FAM and TAMRA into close proximity, resulting in a strong FRET signal. In the absence of UDG, the relatively stable dsDNA separates the labeled FAM and TAMRA, giving a weak FRET signal. Thus, by measuring the system fluorescence intensity and exploiting FRET signal difference, UDG activity can be detected in a simple process. The detection limit is 0.087 U/mL without requiring additional signal amplification process. Besides, our developed strategy can also be used for screening the UDG inhibitors in a ratiometric fluorescence detection way.

Host–guest recognition coupled with triple signal amplification endows an electrochemiluminescent biosensor with enhanced sensitivity

Host–guest recognition coupled with triple signal amplification endows an electrochemiluminescent biosensor with enhanced sensitivity for uracil DNA glycosylase assay.

Colorimetric Assay for Uracil DNA Glycosylase Activity Based on Toehold-Mediated Strand Displacement Circuit

Herein, a novel enzyme-free and label-free strategy for colorimetric assay of uracil DNA glycosylase (UDG) activity, which relies on a target-activated toehold-mediated strand displacement (TMSD) circuit is described. The strategy employs a detection duplex probe composed of a uracil-containing strand (US) and a catalyst strand (CS). UDG present in a sample will cleave uracil bases within US and destabilize the detection duplex probe, which then leads to the dissociation of the detection duplex, releasing CS. The free CS promotes the TMSD reaction, consequently liberating a G-quadruplex DNAzyme strand (GS) which is initially caged by a blocker strand (BS). Notably, a fuel strand (FS) is supplemented to recycle the CS to promote another cycle of TMSD reaction. As a consequence, a large number of GSs are activated by UDG activity and a distinct colorimetric signal is produced through the oxidation of ABTS promoted by the peroxidase mimicking activity of the liberated GSs. Based on this design principle, UDG activity down to 0.006 U mL^-1 with excellent selectivity is successfully determined. The practical applicability of this assay is also demonstrated by reliably determining UDG activities in human serum.

Base excision repair initiated rolling circle amplification-based fluorescent assay for screening uracil-DNA glycosylase activity using Endo IV-assisted cleavage of AP probes

Uracil-DNA glycosylase (UDG) is a crucial damage repair enzyme that initiates the cellular base excision repair pathway that maintains the integrity of the genome. Abnormal UDG activity may induce the malfunction of uracil excision repair that is directly related to a range of diseases including cancers, genotypic diseases, and human immunodeficiencies. In this work, a simple, robust and cost effective biosensing platform for the ultrasensitive detection of UDG activity is established based on the combination of base excision repair-initiated primer generation for rolling circular amplification (RCA) with Endo IV-assisted signal amplification. In the presence of target UDG, UDG can catalyze the removal of uracil on a hairpin probe (HP) leaving an apurinic/apyrimidinic (AP site) which can be cleaved by Endo IV to generate a primer for triggering the RCA reaction. Subsequently, numerous AP site-embedded signal probes, acting as fluorescence-quenched probes, combine with the RCA products to perform signal transduction and quadradic signal amplification through an Endo IV-catalyzed cleavage reaction, thus significantly enhancing the fluorescence signal, which can be used for UDG activity screening. Under optimum conditions, this biosensor exhibits improved sensitivity toward target UDG with a detection limit of as low as 9.3 × 10-5 U mL-1 and a wide detection range across 5 orders of magnitude. Additionally, our biosensor demonstrates high selectivity toward UDG for simple, rapid, and low-cost detection. Furthermore, by redesigning the modification of HP and using of suitable endonuclease enzymes, this RCA coupled with Endo IV-assisted signal amplification strategy might be applied for the detection of various other targets, such as thymine DNA glycosylase, 8-oxoguanine DNA glycosylase, DNA methyltransferase, and so on. Hence, the proposed strategy provides a useful and versatile biosensing platform for the ultrasensitive detection of UDG activity and related fundamental biomedicine research and clinical diagnosis.

Fluorometric determination of the activity of uracil-DNA glycosylase by using graphene oxide and exonuclease I assisted signal amplification

The base-excision repair enzyme uracil-DNA glycosylase (UDG) plays a crucial role in the maintenance of genome integrity. The authors describe a fluorometric method for the detection of the activity of UDG. It is making use of (a) a 3'-FAM-labeled hairpin DNA probe with two uracil deoxyribonucleotides in the self-complementary duplex region of its hairpin structure, (b) exonuclease I (Exo I) that catalyzes the release of FAM from the UDG-induced stretched ssDNA probe, and (c) graphene oxide that quenches the green FAM fluorescence of the intact hairpin DNA probe in the absence of UDG. If Exo I causes the release of FAM from the hairpin DNA probe, the fluorescence peaking at 517 nm is turned off in the absence of UDG but turned on in its presence. The resulting assay has a wide linear range (0.008 to 1 U·mL^-1) and a detection limit as low as 0.005 U·mL^-1. It has good specificity for UDG over potentially interfering enzymes and gave satisfactory results when applied to biological samples. Conceivably, the method may be used in a wide range of applications such as in diagnosis, drug screening, and in studying the repair of DNA lesions. Graphical abstract Schematic presentation of a fluorometric strategy for detection of the activity of uracil-DNA glycosylase by using on graphene oxide and exonuclease I assisted signal amplification.

Self-primer and self-template recycle rolling circle amplification strategy for sensitive detection of uracil-DNA glycosylase activity

Sensitive and accurate detection of uracil-DNA glycosylase (UDG) activity is available for evaluating and validating their function in uracil base-excision repair (UBER) pathway and clinical diagnosis. Here, a sensitive and accurate method for UDG activity detection was developed on the basis of self-primer and self-template recycle rolling circle amplification (Self-RRCA) strategy. First, an immature template (IT) with a uracil base and an Nt.BbvCI nicking site was designed, which could hybridize with a designed primer to form a pre-amplicon probe (PA probe). Under the action of UDG, the uracil base in the PA probe could be removed to generate an apyrimidinic (AP) site. Then the generated AP site was excised by endonuclease IV (endo IV), making the PA probe form a RCA amplicon through reconformation. The RCA amplicon subsequently was used to trigger the RCA, and after Nt.BbvCI nicking reaction, new amplicons were released to initiate next RCA, constituting a Self-RRCA. In this method, the designed IT was not fully complementary with the primer in the ligation part, which could effectively avoid nonspecific ligation reaction and eventually effectively avoid nonspecific amplification. Compared with the linear RCA, the Self-RRCA exhibited higher amplification efficiency. Due to above advantages, a sensitive and accurate detection method was achieved with a limit of 4.68 × 10^-5 U mL^-1. Furthermore, the method was adopted to screen the inhibitor of UDG and assay the activity of UDG in HeLa cell lysate. This method will offer a promising analysis tool for further biomedical research of UDG and clinical diagnosis.

Triplex DNA-based Bioanalytical Platform for Highly Sensitive Homogeneous Electrochemical Detection of Melamine

Melamine detection has attracted much attention since the discovery of the damage of melamine to human health. Herein, we have developed a sensitive homogeneous electroanalytical platform for melamine detection, which is relied on the formation of triplex molecular beacon integrated with exonuclease III (Exo III)-mediated signal amplification. The formation of triplex molecular beacon was triggered by the recognition and incorporation of melamine to the abasic (AP) site contained in the triplex stem. The stem of the triplex molecular beacon was designed to have a protruding double-strand DNA, which can be recognized and hydrolyzed by Exo III for releasing methylene blue (MB)-labeled mononucleotide. These released MB molecules exhibit high diffusivity toward indium tin oxide electrode with negative charge, thus producing a significantly increased electrochemical response. Taking advantages of the high binding affinity of the DNA triplex structure containing AP sites towards melamine and the unique features of Exo III, this sensing platform is capable for sensitive and selective melamine assay with a detection limit as low as 8.7 nM. Furthermore, this strategy shows good applicability for melamine assay in real samples. Therefore, this strategy broadens the application of triplex DNA and presents a new method for sensitive detection of melamine.

Uracil removal-inhibited ligase reaction in combination with catalytic hairpin assembly for the sensitive and specific detection of uracil-DNA glycosylase activity

Uracil removal-inhibited ligase reaction in combination with a catalytic hairpin assembly sensing strategy is demonstrated for UDG activity detection.

A novel and label-free biosensors for uracil-DNA glycosylase activity based on the electrochemical oxidation of guanine bases at the graphene modified electrode

Uracil-DNA glycosylase (UDG) as an important base excision repair enzymes is widely distributed in organism, and it plays a crucial role in sustaining the genome integrity. Therefore, it is significant to carry out the analysis of UDG activity. In this present work, a novel and label-free electrochemical sensing platform for the sensitive detection of uracil DNA glycosylase (UDG) activity has been developed. Herein, the graphene modified glassy carbon (GC) electrode was prepared. And two complementary DNA strands were hybridized to form dsDNA (P1P2). In the presence of UDG, the uracil bases in P1P2 were specifically hydrolyzed, inducing the unwinding of the DNA duplex, and accompanied by the release of P1. Thus, the released P1 was adsorbed onto the graphene/GC electrode surface via π-π stacking. By investigating the electrochemical behavior of P1 at the graphene/GC electrode, the electrochemical oxidation of guanine bases in P1 was obviously observed. Therefore, using the current responses of guanine base in P1 as a signal indicator, UDG activity can be simply determined with high sensitivity, and the detectable lowest concentration is 0.01U/mL. This present design does not need covalent attachment of redox indicator to DNA, preventing participation of redox labels in the background. Meanwhile, the proposed strategy for the assay of UDG activity also has a remarkable sensitivity due to the excellent properties of graphene, which could increase both the immobilization amount of released ssDNA and the conductivity of the sensing system. All these elucidate that this developed protocol may lay a potential foundation for the sensitive detection of UDG activity in clinical diagnosis.

A label free fluorescent assay for uracil-DNA glycosylase activity based on the signal amplification of exonuclease I

A label free fluorescent assay for uracil-DNA glycosylase activity was developed based on the signal amplification of exonuclease I.

A colorimetric and smartphone readable method for uracil-DNA glycosylase detection based on the target-triggered formation of G-quadruplex

A simple, colorimetric and smartphone readable method based on the target-triggered formation of G-quadruplex has been developed for uracil-DNA glycosylase detection.