Studies of the reaction products resulted from glycerol electrooxidation on Ni-based materials in alkaline medium

Tunable Method for the Preparation of Layered Double Hydroxide Nanoparticles and Mesoporous Mixed Metal Oxide Electrocatalysts for the Oxygen Evolution Reaction

Preparation of high-performance and durable electrocatalysts for anion exchange membrane water electrolysis is a crucial step toward the broad implementation of this technology. Here, we present an easily tunable, one-step hydrothermal method for the preparation of Ni-based (NiX, X = Co, Fe) layered double hydroxide nanoparticles (LDHNPs) for the oxygen evolution reaction (OER), using tris(hydroxymethyl)aminomethane (Tris-NH₂) for particle growth control. The LDHNPs are used as building blocks of mesoporous mixed metal oxides (MMOs) with a block copolymer template (Pluronic F127), followed by thermal treatment at 250 °C. NiX MMOs have a significantly larger surface area compared to the analogous LDHNPs. NiX LDHNPs and MMOs exhibit excellent performance and long-term cycling stability, making them promising OER catalysts. Moreover, this versatile method can be easily tailored and scaled up for the preparation of platinum group metal-free electrocatalysts for other reactions of interest, which highlights the relevance of this work to the field of electrocatalysis.

Operando Revealing the Crystal Phase Transformation and Electrocatalytic Activity Correlation of MnO2 toward Glycerol Electrooxidation

In this work, we report for the first time a comprehensive operando investigation of the intricate correlation between dynamic phase evolution and glycerol electrooxidation reaction (GEOR) performance across three primary MnO₂ crystallographic phases (α-, β-, and γ-MnO₂). The results showed that all three electrocatalysts exhibited comparable selectivity toward three-carbon products (∼90%), but γ-MnO₂ exhibited superior performance, with a low onset potential of ∼1.45 V_RHE, the highest current density of ∼1.9 mA cm^-2 at 1.85 V_RHE, and reasonable stability. Operando Raman spectroscopy revealed the potential-induced surface reconstruction of different MnO₂ structures from which a correlation among the applied potential, electrocatalytic activity, and product distribution was identified. The higher the applied potential, the greater conversion from the original structure to δ-MnO₂, resulting in lower C-C cleavage and higher 3C product selectivity. This study not only provides a systematic understanding of structure-controlled electrocatalytic activity for high selectivity toward 3C products of MnO₂ but also contributes to the development of a non-noble and environmentally friendly catalyst for valorizing glycerol.

Enhancement of Supercapacitor Performance of Electrochemically Grown Nickel Oxide by Graphene Oxide

β-Ni(OH)₂ and β-Ni(OH)₂/graphene oxide (GO) were prepared on an Ni foil electrode using the electrochemical cyclic voltammetry formed in 0.5 M KOH solution. Several surface analyses such as XPS, XRD, and Raman spectroscopies were used to confirm the chemical structure of the prepared materials. The morphologies were determined using SEM and AFM. The addition of the graphene oxide layer showed a remarkable increase in the specific capacitance of the hybrid. Through the measurements, the specific capacitance values were 280 F g^-1 and 110 F g^-1 after and before adding 4 layers of GO, respectively. The supercapacitor displays high stability until 500 cycles are charged and discharged almost without a loss in its capacitance values.

Enhancing the performance of Ni nanoparticle modified carbon felt towards glycerol electrooxidation: impact of organic additive

Organic additives are widely used in the deposition baths of metals and alloys thanks to their special function which affects the growth and the building of the crystal. This study investigates the effect of glycerol on Ni deposition onto carbon felt (CF) and its effect on the catalytic activity towards glycerol electrooxidation. The impact of glycerol on the morphology, distribution, and particle size of the electrodeposited Ni is disclosed using a scanning electron microscope (SEM). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) techniques were used to probe the possible changes of the electrodeposited Ni oxide phases. Electrochemical measurements show that the as-synthesized Ni_0.05@CF electrocatalyst prepared in the presence of 50 mM glycerol has a marked activity towards glycerol electrooxidation, as confirmed by the impressive increase of the oxidation current by about 1.6 times concurrently with a favorable negative shift of its onset potential. Moreover, the charge transfer resistance (R _ct) is much reduced from 140 to 87 ohm. The addition of glycerol to the deposition bath is believed to retard the growth of the formed Ni deposits while enhancing the nucleation rate and thus increases the particle density and, consequently, the distribution of deposited Ni over the entire CF is improved along with increasing the surface concentration and surface-active sites. This assumption is supported by density functional theory (DFT) calculations.

Glycerol Electro-Oxidation in Alkaline Medium with Pt-Fe/C Electrocatalysts Synthesized by the Polyol Method: Increased Selectivity and Activity Provided by Less Expensive Catalysts

We have investigated platinum catalysts containing iron as a modifier to obtain catalysts with superior electrocatalytic activity toward glycerol electro-oxidation in an alkaline medium. The electrocatalysts, supported on carbon Vulcan, were synthesized by the polyol method. The physicochemical characterization data showed that the metals were well distributed on the carbon support and had small particle size (2 nm). The Pt:Fe metal ratio differed from the nominal composition, indicating that reducing iron with platinum was difficult, even though some parameters of the synthesis process were changed. Electrochemical analyses revealed that PtFe/C was more active and stable than commercial Pt/C was, and analysis of the electrolysis by-products showed that iron addition to Pt/C boosted the glycerol conversion and selectivity for glyceric acid formation.

Electrocatalytic Upcycling of Biomass and Plastic Wastes to Biodegradable Polymer Monomers and Hydrogen Fuel at High Current Densities

Transformation of biomass and plastic wastes to value-added chemicals and fuels is considered an upcycling process that is beneficial to resource utilization. Electrocatalysis offers a sustainable approach; however, it remains a huge challenge to increase the current density and deliver market-demanded chemicals with high selectivity. Herein, we demonstrate an electrocatalytic strategy for upcycling glycerol (from biodiesel byproduct) to lactic acid and ethylene glycol (from polyethylene terephthalate waste) to glycolic acid, with both products being as valuable monomers for biodegradable polymer production. By using a nickel hydroxide-supported gold electrocatalyst (Au/Ni(OH)₂), we achieve high selectivities of lactic acid and glycolic acid (77 and 91%, respectively) with high current densities at moderate potentials (317.7 mA/cm² at 0.95 V vs RHE and 326.2 mA/cm² at 1.15 V vs RHE, respectively). We reveal that glycerol and ethylene glycol can be enriched at the Au/Ni(OH)₂ interface through their adjacent hydroxyl groups, substantially increasing local concentrations and thus high current densities. As a proof of concept, we employed a membrane-free flow electrolyzer for upcycling triglyceride and PET bottles, attaining 11.2 g of lactic acid coupled with 9.3 L of H₂ and 13.7 g of glycolic acid coupled with 9.4 L of H₂, respectively, revealing the potential of coproduction of valuable chemicals and H₂ fuel from wastes in a sustainable fashion.

Tailor-designed binary Ni-Cu nano dendrites decorated 3D-carbon felts for efficient glycerol electrooxidation

Herein, 3D-Carbon Felt (CF) are decorated with nickel-copper (Ni-Cu@CF) bimetallic nanostructures through either sequential or co-electrodeposition tactics. Their catalytic activity towards glycerol electrooxidation is investigated by employing cyclic voltammetry (CV) and linear sweep voltammetry LSV. The morphology and composition of the various Ni-Cu@CF are investigated using X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) together with various electrochemical measurements (e.g., CV, chronoamperometry, LSV). The co-deposition of Ni-Cu shows a dendritic-like structure with higher electrocatalytic activity towards glycerol electrooxidation compared to the monometallic counterparts. Interestingly, the best electrode (NiCu@CF Ni particles as the top layer) prepared by sequential electrodeposition shows 1.6-fold higher glycerol oxidation activity, manifested in oxidation current, compared to Ni-coated CF due to Ni particles covering the surface of dendritic copper uniformly. Thus, the surface concentration of Ni is increased and at the same time a synergistic effect occurs between Ni and Cu by the simple addition of Cu which reinforces the surface concentration of Ni from 3.4 × 10-8 to 1.1 × 10-7 mol cm-2.

Role of Ni in PtNi Bimetallic Electrocatalysts for Hydrogen and Value-Added Chemicals Coproduction via Glycerol Electrooxidation

Pt-based bimetallic electrocatalysts are promising candidates to convert surplus glycerol from the biodiesel industry to value-added chemicals and coproduce hydrogen. It is expected that the nature and content of the elements in the bimetallic catalyst can not only affect the reaction kinetics but also influence the product selectivity, providing a way to increase the yield of the desired products. Hence, in this work, we investigate the electrochemical oxidation of glycerol on a series of PtNi nanoparticles with increasing Ni content using a combination of physicochemical structural analysis, electrochemical measurements, operando spectroscopic techniques, and advanced product characterizations. With a moderate Ni content and a homogenously alloyed bimetallic Pt-Ni structure, the PtNi2 catalyst displayed the highest reaction activity among all materials studied in this work. In situ FTIR data show that PtNi2 can activate the glycerol molecule at a more negative potential (0.4 V _RHE) than the other PtNi catalysts. In addition, its surface can effectively catalyze the complete C-C bond cleavage, resulting in lower CO poisoning and higher stability. Operando X-ray absorption spectroscopy and UV-vis spectroscopy suggest that glycerol adsorbs strongly onto surface Ni(OH) _x sites, preventing their oxidation and activation of oxygen or hydroxyl from water. As such, we propose that the role of Ni in PtNi toward glycerol oxidation is to tailor the electronic structure of the pure Pt sites rather than a bifunctional mechanism. Our experiments provide guidance for the development of bimetallic catalysts toward highly efficient, selective, and stable glycerol oxidation reactions.

Fuel Cell Reactors for the Clean Cogeneration of Electrical Energy and Value-Added Chemicals

Fuel cell reactors can be tailored to simultaneously cogenerate value-added chemicals and electrical energy while releasing negligible CO2 emissions or other pollution; moreover, some of these reactors can even “breathe in” poisonous gas as feedstock. Such clean cogeneration favorably offsets the fast depletion of fossil fuel resources and eases growing environmental concerns. These unique reactors inherit advantages from fuel cells: a high energy conversion efficiency and high selectivity. Compared with similar energy conversion devices with sandwich structures, fuel cell reactors have successfully “hit three birds with one stone” by generating power, producing chemicals, and maintaining eco-friendliness. In this review, we provide a systematic summary on the state of the art regarding fuel cell reactors and key components, as well as the typical cogeneration reactions accomplished in these reactors. Most strategies fall short in reaching a win–win situation that meets production demand while concurrently addressing environmental issues. The use of fuel cells (FCs) as reactors to simultaneously produce value-added chemicals and electrical power without environmental pollution has emerged as a promising direction. The FC reactor has been well recognized due to its “one stone hitting three birds” merit, namely, efficient chemical production, electrical power generation, and environmental friendliness. Fuel cell reactors for cogeneration provide multidisciplinary perspectives on clean chemical production, effective energy utilization, and even pollutant treatment, with far-reaching implications for the wider scientific community and society. The scope of this review focuses on unique reactors that can convert low-value reactants and/or industrial wastes to value-added chemicals while simultaneously cogenerating electrical power in an environmentally friendly manner.

Graphical Abstract

A schematic diagram for the concept of fuel cell reactors for cogeneration of electrical energy and value-added chemicals

Understanding the Roles of Electrogenerated Co3+ and Co4+ in Selectivity-Tuned 5-Hydroxymethylfurfural Oxidation

The Co-based electrocatalyst is among the most promising candidates for electrochemical oxidation of 5-hydroxymethylfurfural (HMF). However, the intrinsic active sites and detailed mechanism of this catalyst remains unclear. We combine experimental evidence and a theoretical study to show that electrogenerated Co³⁺ and Co⁴⁺ species act as chemical oxidants but with distinct roles in selective HMF oxidation. It is found that Co³⁺ is only capable of oxidizing formyl group to produce carboxylate while Co⁴⁺ is required for the initial oxidation of hydroxyl group with significantly faster kinetics. As a result, the product distribution shows explicit dependence on the Co oxidation states and selective production of 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) and 2,5-furandicarboxylic acid (FDCA) are achieved by tuning the applied potential. This work offers essential mechanistic insight on Co-catalyzed organic oxidation reactions and might guide the design of more efficient electrocatalysts.

An Overview of Glycerol Electrooxidation Mechanisms on Pt, Pd and Au

In the most recent decade, glycerol electrooxidation (GEOR) has attracted extensive research interest for valorization of glycerol: the conversion of glycerol to value-added products. These reactions at platinum, palladium, and gold electrodes have a lot of uncertainty in their reaction mechanisms, which has generated some controversies. This review gathers many reported experimental results, observations and proposed reaction mechanisms in order to draw a full picture of GEOR. A particular focus is the clarification of two propositions: Pd is inferior to Pt in cleaving the C-C bonds of glycerol during the electrooxidation and the massive production of CO₂ at high overpotentials is due to the oxidation of the already-oxidized carboxylate products. It is concluded that the inferior C-C bond cleavability with Pd electrodes, as compared with Pt electrodes, is due to the inefficiency of deprotonation, and the massive generation of CO₂ as well as other C1/C2 side products is partially caused by the consumption of OH^- at the anodes, as a lower pH reduces the amount of carboxylates and favors the C-C bond scission. A reaction mechanism is proposed in this review, in which the generation of side products are directly from glycerol ("competition" between each side product) rather than from the further oxidation of C2/C3 products. Additionally, GEOR results and associated interpretations for Ni electrodes are presented, as well as a brief review on the performances of multi-metallic electrocatalysts (most of which are nanocatalysts) as an introduction to these future research hotpots.

Micro–nanoarchitectures of electrodeposited Ni–ITO nanocomposites on copper foil as electrocatalysts for the oxygen evolution reaction

A simple conventional three electrodes system was used for the preparation of Ni and Ni–ITO nanocomposites as an electrocatalyst for oxygen evolution reaction.

Electrochemical Reactors for CO2 Conversion

Increasing risks from global warming impose an urgent need to develop technologically and economically feasible means to reduce CO2 content in the atmosphere. Carbon capture and utilization technologies and carbon markets have been established for this purpose. Electrocatalytic CO2 reduction reaction (CO2RR) presents a promising solution, fulfilling carbon-neutral goals and sustainable materials production. This review aims to elaborate on various components in CO2RR reactors and relevant industrial processing. First, major performance metrics are discussed, with requirements obtained from a techno-economic analysis. Detailed discussions then emphasize on (i) technical benefits and challenges regarding different reactor types, (ii) critical features in flow cell systems that enhance CO2 diffusion compared to conventional H-cells, (iii) electrolyte and its effect on liquid phase electrolyzers, (iv) catalysts for feasible products (carbon monoxide, formic acid and multi-carbons) and (v) strategies on flow channel and anode design as next steps. Finally, specific perspectives on CO2 feeds for the reactor and downstream purification techniques are annotated as part of the CO2RR industrial processing. Overall, we focus on the component and system aspects for the design of a CO2RR reactor, while pointing out challenges and opportunities to realize the ultimate goal of viable carbon capture and utilization technology.

Modification of Nickel Surfaces by Bismuth: Effect on Electrochemical Activity and Selectivity toward Glycerol

Herein, we study the effect of adding bismuth to Ni-nanostructured catalysts (Ni_xBi_1-x, x = 100-90 at. %) for glycerol electro-oxidation in alkaline solution by combining physiochemical, electrochemical, and in situ infrared spectroscopy techniques, as well as continuous electrolysis with HPLC (high-performance liquid chromatography) product analysis. The addition of small quantities of Bi (<20 at. %) to Ni nanoparticles led to significant activity enhancement at lower overpotentials, with Ni₉₀Bi₁₀ displaying an over 2-fold increase compared to Ni. Small quantities of bismuth actively affected the reaction selectivity of Ni by suppressing the pathways with C-C bond cleavage, hindering the production of carbonate and formate and improving the formation of tartronate, oxalate, and glycerate. Furthermore, the effect of aging on Ni_xBi_1-x catalysts was investigated, resulting in structural modification from the Ni-Bi double shell/core structure to Bi decorated on the folded Ni sheet, thus enhancing their activity twice after 2 weeks of aging. NiBi catalysts are promising candidates for glycerol valorization to high-value-added products.

A review of recent progress on electrocatalysts toward efficient glycerol electrooxidation

Glycerol electrooxidation has attracted immense attention due to the economic advantage it could add to biodiesel production. One of the significant challenges for the industrial development of glycerol electrooxidation process is the search for a suitable electrocatalyst that is sustainable, cost effective, and tolerant to carbonaceous species, results in high performance, and is capable of replacing the conventional Pt/C catalyst. We review suitable, sustainable, and inexpensive alternative electrocatalysts with enhanced activity, selectivity, and durability, ensuring the economic viability of the glycerol electrooxidation process. The alternatives discussed here include Pd-based, Au-based, Ni-based, and Ag-based catalysts, as well as the combination of two or three of these metals. Also discussed here are the prospective materials that are yet to be explored for glycerol oxidation but are reported to be bifunctional (being capable of both anodic and cathodic reaction). These include heteroatom-doped metal-free electrocatalysts, which are carbon materials doped with one or two heteroatoms (N, B, S, P, F, I, Br, Cl), and heteroatom-doped nonprecious transition metals. Rational design of these materials can produce electrocatalysts with activity comparable to that of Pt/C catalysts. The takeaway from this review is that it provides an insight into further study and engineering applications on the efficient and cost-effective conversion of glycerol to value-added chemicals.

Recent advances in the electrooxidation of biomass-based organic molecules for energy, chemicals and hydrogen production

The recent developments in biomass-derivative fuelled electrochemical converters for electricity or hydrogen production together with chemical electrosynthesis have been reviewed.

Nickel-molybdenum nitride nanoplate electrocatalysts for concurrent electrolytic hydrogen and formate productions

Hydrogen production by electrocatalytic water splitting is an efficient and economical technology, however, is severely impeded by the kinetic-sluggish and low value-added anodic oxygen evolution reaction. Here we report the nickel-molybdenum-nitride nanoplates loaded on carbon fiber cloth (Ni-Mo-N/CFC), for the concurrent electrolytic productions of high-purity hydrogen at the cathode and value-added formate at the anode in low-cost alkaline glycerol solutions. Especially, when equipped with Ni-Mo-N/CFC at both anode and cathode, the established electrolyzer requires as low as 1.36 V of cell voltage to achieve 10 mA cm^-2, which is 260 mV lower than that in alkaline aqueous solution. Moreover, high Faraday efficiencies of 99.7% for H₂ evolution and 95.0% for formate production have been obtained. Based on the excellent electrochemical performances of Ni-Mo-N/CFC, electrolytic H₂ and formate productions from the alkaline glycerol solutions are an energy-efficient and promising technology for the renewable and clean energy supply in the future.

Glycerol Electro-Oxidation in Alkaline Media and Alkaline Direct Glycerol Fuel Cells

The low price, highly active triol structure, high volumetric energy density, simple storage and environment-friendly properties make glycerol a promising fuel for an alkaline direct alcohol fuel cell (ADAFC). Unlike other ADAFCs, alkaline direct glycerol fuel cells (ADGFCs) can be used either to generate only energy (the common use of fuel cells) or to produce both energy and valuable chemicals. This work presents an overview of catalysts for glycerol oxidation in alkaline media, and their use in ADGFCs. A particular attention was paid to binary and ternary catalysts able both to increase the selectivity to valuable C3 glycerol oxidation products, reducing the C–C bond cleavage, and simultaneously to enhance glycerol conversion.

Electrocatalytic Oxidation of Methanol, Ethanol, and Glycerol on Ni(OH)2 Nanoparticles Encapsulated with Poly[Ni(salen)] Film

This study describes a systematic investigation of the electrocatalytic activity of poly[Ni(salen)] films, as catalysts for the electro-oxidation of Cn alcohols (Cn = methanol, ethanol, and glycerol) in alkaline medium. The [Ni(salen)] complex was electropolymerized on a glassy carbon surface and electrochemically activated in NaOH solution by cyclic voltammetry. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy results indicate that during the activation step the polymeric film hydrolyzes, leading to the formation of β-Ni(OH)₂ spherical nanoparticles, with an average size of 2.4 ± 0.5 nm, encapsulated with the poly[Ni(salen)] film. Electrochemical results obtained together with the in situ Fourier transform infrared spectroscopy confirm that the electro-oxidation of methanol, ethanol, and glycerol occurs by involving a cycling oxidation of β-Ni(OH)₂ with the formation of β-NiOOH species, followed by the charge transfer to the alcohols, which regenerates β-Ni(OH)₂. Analyses of the oxidation products at low potentials indicate that the major product obtained during the oxidation of methanol and glycerol is the formate, while the oxidation of ethanol leads to the formation of acetate. On the other hand, at high potentials (E = 0.6 V), there is evidence that the oxidation of Cn alcohols leads to carbonate ions as an important product.

Selective Electrooxidation of Glycerol Into Value-Added Chemicals: A Short Overview

A comprehensive overview of the catalysts developed for the electrooxidation of glycerol with the aim of producing selectively value-added compounds is proposed in the present contribution. By presenting the main results reported in the literature on glycerol electrooxidation in acidic and alkaline media, using different kinds of catalytic materials (monometallic catalysts based on platinum group metals and non-noble metals, multimetallic alloys, or modification of surfaces by adatoms, etc.) and under different experimental conditions, some general trends concerning the effects of catalyst composition and structure, of reaction medium and of the electrode potential to enhance the activity for the glycerol oxidation reaction and of the selectivity toward a unique value-added product will be presented and discussed. The objective is to provide a guideline for the development of electrochemical systems which allow performing the electrooxidation of glycerol at the rate and selectivity as high as possible.

Pulse electrodeposited nickel with structure directing agents as an electrocatalyst for oxidation of glycerol

Electrodeposition of Ni, Ni–CA and Ni–TBr on mild steel using a pulse technique for electro-oxidation of glycerol.

Electrocatalytic valorisation of biomass derived chemicals

Recent progress in electro-valorization of biomass-derived intermediates is reviewed, while a perspective on future R&D in this field is provided.