Preparation of Electrochemical Cytosensor for Sensitive Detection of HeLa Cells Based on Self-Assembled Monolayer

Aptamer-based electrochemical cytosensors for tumor cell detection in cancer diagnosis: A review

Circulating tumor cells, a type of viable cancer cell circulating from primary or metastatic tumors in the blood stream, can lead to the parallel development of primary tumors and metastatic lesions. Highly selective and sensitive detection of tumor cells has become a hot research topic and can provide a basis for early diagnosis of cancers and anticancer drug evaluation to develop the best treatment plan. Aptamers are single-stranded oligonucleotides that can bind to target tumor cells in unique three-dimensional structures with high specificity and affinity. Aptamer-based methods or signal amplification methods using aptamers show great potential in improving the selectivity and sensitivity of electrochemical (EC) cytosensors for tumor cell detection. This review covers the remarkable developments in aptamer-based EC cytosensors for the identification of cell type, cell counting and detection of crucial proteins on the cell surface. Various EC techniques have been developed for cancer cell detection, including common voltammetry or impedance, electrochemiluminescence and photoelectrochemistry in a direct approach (aptamer-target cell), sandwich approach (capture probe-target cell-signaling probe) or other approach. The current challenges and promising opportunities in the establishment of EC aptamer cytosensors for tumor cell detection are also discussed.

Ultrasensitive label-free detection of circulating tumor cells using conductivity matching of two-dimensional semiconductor with cancer cell

The excellent conductivity matching of two-dimensional (2D) semiconductor nanomaterials (e.g. MoS₂) with cancer cell plays an important role in ultrasensitive label-free impedimetric detection of circulating tumor cells (CTC) (<1 cell/mL). Firstly, 2D semiconductor materials (e.g. 2D MoS₂) exfoliated by folic acid (FA) is used to construct MoS₂/FA-modified gold electrode (AuE/MoS₂/FA). Then, the fabricated electrode is applied for HeLa cell detection in a linear range from 1 to 10⁵ cell/mL with a detection limit of 0.43 cell/mL (S/N = 3). The detection mechanism of high sensitivity might be owing to the electric conductivity matching of MoS₂ (0.14 S/m) to cancer cell (0.13-0.23 S/m). A negligible conductivity change induced by cancer cell will produce a large impedance change of semiconductor electrode. Furthermore, HeLa cells dispersed in healthy blood samples are detected by suggested cytosensor in a linear range from 50 to 10⁵ cell/mL with a detection limit of 52.24 cell/mL (S/N = 2). Finally, we demonstrate that the cytosensor is capable of differentiating patients of cervical and liver cancers by the real CTC analysis from healthy control.

Label-free cytosensing of cancer cells based on the interaction between protein and an electron-transfer carbohydrate-mimetic peptide

We used an electron-transfer carbohydrate-mimetic peptide (YYYYC) to construct an electrochemical cytosensing system. Magnetic beads were modified with either asialofetuin (ASF) or soybean agglutinin (SBA) to evaluate the effect on cell sensing. Because SBA binds to the galactose residue that exists at the terminals of the carbohydrate chains in ASF, the target protein was accumulated on the protein magnetic beads. SBA is an example of N-acetylgalactosamine- and galactose-binding proteins that readily combine with YYYYC. When the peptides and protein-immobilized beads competed for a target protein, the peak current of the peptides changed according to the concentration of the protein at the 10^-12 M level. Next, human myeloid leukemia cells (K562 cell) were measured using the peptide and the carbohydrate chains on the cell surface that recognize SBA. The electrode response was linear to the number of K562 cells and ranged from 1.0 × 10² to 5.0 × 10³ cells mL^-1. In addition, detection of a human liver cancer cell (HepG2 cell) was carried out using interactions with the peptide, the ASF receptors in HepG2 cells, and the carbohydrate chains of ASF. The peak currents were proportional and ranged between 5.0 × 10¹ and 1.5 × 10³ cells mL^-1. When the values estimated from an electrochemical process were compared with those obtained by ELISA, the results were within the acceptable range of measurement error.

Peptide nanoparticles (PNPs) modified disposable platform for sensitive electrochemical cytosensing of DLD-1 cancer cells

A novel diphenylalaninamid (FFA) based peptide nanoparticles (PNPs) modified pencil graphite electrodes (PGEs) for construction of electrochemical cytosensor was demonstrated for the first time in this study. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images revealed the spherical nanostructure of the synthesized FFA based PNPs while attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectra provided information about the structure and conformation of proteins in their structure. Self-assembly of PNPs on PGE surface and adhesion of DLD-1 cancer cells on this surface was also characterized by electrochemical measurements. PNP/PGEs acted as a sensitive platform for simple and rapid quantification of low concentration of DLD-1 cancer cells in early diagnosis using the electrochemical impedance method (EIS). The offered cytosensor demonstrated outstanding performance for the detection of DLD-1 cells by the EIS method. The impedance of electronic transduction was associated with the amount of the immobilized cells ranging from 2 × 10² to 2.0 × 10⁵ cellsmL^-1 with a limit of detection of 100 cellsmL^-1. The efficient performance of the cytosensor was attributed to the well-defined nanostructure and biocompability of PNPs on the substrate.

Sialic Acid-Targeted Biointerface Materials and Bio-Applications

Sialic acids (SAs) are typically found as terminal monosaccharides attached to cell surface glycoconjugates, which play crucial roles in various biological processes, and aberrant sialylation is closely associated with many diseases, particularly cancers. As SAs are overexpressed in tumor-associated glycoproteins, the recognition and specific binding of SA are crucial for monitoring, analyzing and controlling cancer cells, which would have a considerable impact on diagnostic and therapeutic application. However, both effective and selective recognition of SA on the cancer cell surface remains challenging. In recent years, SA-targeted biointerface materials have attracted great attention in various bio-applications, including cancer detection and imaging, drug delivery for cancer therapy and sialylated glycopeptide separation or enrichment. This review provides an overview of recent advances in SA-targeted biointerface materials and related bio-applications.

In Situ Growth of Mesoporous Silica with Drugs on Titanium Surface and Its Biomedical Applications

Mesoporous silica has been developed for the modification of titanium surfaces that are used as implant materials. Yet, the traditional modification methods failed to effectively construct mesoporous silica on the titanium surface evenly and firmly, in which the interaction between mesoporous silica and titanium was mainly physical. Here, in situ growth of mesoporous silica on a titanium surface was performed using a simple evaporation-induced self-assembly strategy. Meantime, in situ introduction of drugs (heparin and vancomycin) to mesoporous silica was also adopted to improve the drug-loading amount. Both the above-mentioned processes were completed at the same time. Transmission electron microscopy, N₂ adsorption-desorption isotherms, Fourier transform infrared spectroscopy, scanning electron microscopy, and water contact angle measurements were used to characterize the structure of the mesoporous silica film. Results indicated that the mesoporous silica film that in situ grew on the titanium surface was smooth, thin, transparent, and stable. Cytotoxicity, proliferation performance of osteoblast cells, and in vitro and in vivo studies of the antibacterial activity of the coating were tested. This is the first study to modify the titanium surface by the in situ growth of a mesoporous silica coating with two kinds of drugs. The stability of the mesoporous silica coating can be attributed to the chemical bonding between dopamine and silicon hydroxyl of the mesoporous silica coating, and the smooth surface of mesoporous silica is a result of the method of in situ growth. The large amount of drug-loading also could be ascribed to the in situ introduction of drugs during the synthetic process. The strategy proposed in this work will bring more possibilities for the preparation of advanced functional materials based on the combination of mesoporous structure and metallic materials.

Boronic Acid vs. Folic Acid: A Comparison of the bio-recognition performances by Impedimetric Cytosensors based on Ferrocene cored dendrimer

A comparative study is reported where folic acid (FA) and boronic acid (BA) based cytosensors and their analytical performances in cancer cell detection were analyzed by using electrochemical impedance spectroscopy (EIS) method. Cytosensors were fabricated using self-assembled monolayer principle by modifying Au electrode with cysteamine (Cys) and immobilization of ferrocene cored polyamidiamine dendrimers second generation (Fc-PAMAM (G2)), after which electrodes were modified with FA and BA. Au/Fc-PAMAM(G2)/FA and Au/Fc-PAMAM(G2)/BA based cytosensors showed extremely good analytical performances in cancer cell detection with linear range of 1×10² to 1×10⁶cellsml^-1, detection limit of 20cellsml^-1 with incubation time of 20min for FA based electrode, and for BA based electrode detection limit was 28cellsml^-1 with incubation time of 10min. Next to excellent analytical performances, cytosensors showed high selectivity towards cancer cells which was demonstrated in selectivity study using human embryonic kidney 293 cells (HEK 293) as normal cells and Au/Fc-PAMAM(G2)/FA electrode showed two times better selectivity than BA modified electrode. These cytosensors are promising for future applications in cancer cell diagnosis.

An electrochemical cytosensor for ultrasensitive detection of cancer cells using modified graphene–gold nanostructures

The ultrasensitive detection of human prostate metastatic cancer cells (Du-145) was investigated through a novel electrochemical cytosensor.

Highly sensitive detection of cancer cells with an electrochemical cytosensor based on boronic acid functional polythiophene

The detection of cancer cells through important molecular recognition target such as sialic acid is significant for the clinical diagnosis and treatment. There are many electrochemical cytosensors developed for cancer cells detection but most of them have complicated fabrication processes which results in poor reproducibility and reliability. In this study, a simple, low-cost, and highly sensitive electrochemical cytosensor was designed based on boronic acid-functionalized polythiophene. In cytosensors fabrication simple single-step procedure was used which includes coating pencil graphite electrode (PGE) by means of electro-polymerization of 3-Thienyl boronic acid and Thiophen. Electrochemical impedance spectroscopy and cyclic voltammetry were used as an analytical methods to optimize and measure analytical performances of PGE/P(TBA_0.5Th_0.5) based electrode. Cytosensor showed extremely good analytical performances in detection of cancer cells with linear rage of 1×10¹ to 1×10⁶ cellsmL^-1 exhibiting low detection limit of 10 cellsmL^-1 and incubation time of 10min. Next to excellent analytical performances, it showed high selectivity towards AGS cancer cells when compared to HEK 293 normal cells and bone marrow mesenchymal stem cells (BM-hMSCs). This method is promising for future applications in early stage cancer diagnosis.

Self-assembly of a Ru(II)-deuteroporphyrin lipoic acid derivative on Au(111) surfaces

The synthesis of a new carbonyl ruthenium(II) deuteroporphyrin-IX lipoic acid derivative (Ru(PLip)(CO)) (4) and its self-assembly on Au(111) surfaces were accomplished. Ru(PLip)(CO) 4 was prepared by reduction of the ester groups of carbonyl-ruthenium(II) deuteroporphyrindimethylester 1 and further esterification with D,L-α-lipoic acid 3. The self-assembly of Ru(PLip)(CO) 4 was confirmed by X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The S2p XP spectrum of SAM formed by Ru(PLip)(CO) showed the S2p3/2 peak at 162.4 eV which corresponds to thiolated species bounded to gold. The influence of the interaction of porphyrin moieties on SAM stability was studied. The reductive desorption voltammogram of Ru(PLip)(CO) 4 self-assembled on gold showed an intense reduction peak at -1.02 V while when pyridine was coordinated to the central ruthenium(II) the reductive desorption peak was shifted to -0.85 V. The capacity of the modified Ru(PLip)(CO) gold electrode to detect nitric oxide (NO) was investigated by cyclic voltammetry. An irreversible reduction peak which increased with time on NO exposure was registered at -0.69 V indicating NO coordination to ruthenium(II).

Feasible electrochemical biosensor based on plasma polymerization-assisted composite of polyacrylic acid and hollow TiO2 spheres for sensitively detecting lysozyme

A composite made of polyacrylic acid and hollow TiO2 spheres (TiO2@PPAA) was prepared by the plasma polymerization method and subsequently used as an electrode material for detecting lysozyme. The chemical structure, surface morphology, and electrochemical performance of the TiO2@PPAA composite were mainly affected by the plasma input power used during plasma polymerization. After optimizing plasma conditions, aptamer strands exhibited high adsorption affinity toward the surface of TiO2@PPAA composite via synergistic effects between TiO2 and PPAA. Electrochemical impedance spectroscopy results showed that the developed TiO2@PPAA aptasensor presents highly sensitive detection ability toward lysozyme; the limit of detection of the proposed aptasensor is 0.015 ng mL(-1) (1.04 pM) within the range of 0.05-100 ng mL(-1) in terms of 3σ value. The film further showed excellent selectivity toward lysozyme in the presence of interfering proteins, such as thrombin, bovine serum albumin, and immunoglobulin E. Thus, this aptasensing strategy might broaden the applications of plasma polymerized nanomaterials in the field of biomedical research and early clinical diagnosis.

A repeatable assembling and disassembling electrochemical aptamer cytosensor for ultrasensitive and highly selective detection of human liver cancer cells

In this work, a repeatable assembling and disassembling electrochemical aptamer cytosensor was proposed for the sensitive detection of human liver hepatocellular carcinoma cells (HepG2) based on a dual recognition and signal amplification strategy. A high-affinity thiolated TLS11a aptamer, covalently attached to a gold electrode through Au-thiol interactions, was adopted to recognize and capture the target HepG2 cells. Meanwhile, the G-quadruplex/hemin/aptamer and horseradish peroxidase (HRP) modified gold nanoparticles (G-quadruplex/hemin/aptamer-AuNPs-HRP) nanoprobe was designed. It could be used for electrochemical cytosensing with specific recognition and enzymatic signal amplification of HRP and G-quadruplex/hemin HRP-mimicking DNAzyme. With the nanoprobes as recognizing probes, the HepG2 cancer cells were captured to fabricate an aptamer-cell-nanoprobes sandwich-like superstructure on a gold electrode surface. The proposed electrochemical cytosensor delivered a wide detection range from 1×10(2) to 1×10(7) cells mL(-1) and high sensitivity with a low detection limit of 30 cells mL(-1). Furthermore, after the electrochemical detection, the activation potential of -0.9 to -1.7V was performed to break Au-thiol bond and regenerate a bare gold electrode surface, while maintaining the good characteristic of being used repeatedly. The changes of gold electrode behavior after assembling and desorption processes were investigated by electrochemical impedance spectroscopy and cyclic voltammetry techniques. These results indicate that the cytosensor has great potential in disease diagnostic of cancers and opens new insight into the reusable gold electrode with repeatable assembling and disassembling in the electrochemical sensing.

Au nanoparticle decorated resin microspheres: synthesis and application in electrochemical cytosensors for sensitive and selective detection of lung cancer A549 cells

A novel cytosensor that can sensitively differentiate cancer cells from normal ones is prepared by using antibody-decorated resin microspheres.

An electrochemical cytosensor based on a PAMAM modified glassy carbon paste electrode

Electrochemical detection of HeLa cancer cells with GCPE/AuNp/Cys/Glu/PAMAM/FA cytosensor.