Preparation of High-performance Covalently Bonded Polyaniline Nanorods/Graphene Supercapacitor Electrode Materials using Interfacial Copolymerization Approach

Recent Progress in Polyaniline and its Composites for Supercapacitors

Polyaniline (PANI) has piqued the interest of nanotechnology researchers due to its potential as an electrode material for supercapacitors. Despite its ease of synthesis and ability to be doped with a wide range of materials, PANI's poor mechanical properties have limited its use in practical applications. To address this issue, researchers investigated using PANI composites with materials with highly specific surface areas, active sites, porous architectures, and high conductivity. The resulting composite materials have improved energy storage performance, making them promising electrode materials for supercapacitors. Here, we provide an overview of recent developments in PANI-based supercapacitors, focusing on using electrochemically active carbon and redox-active materials as composites. We discuss challenges and opportunities of synthesizing PANI-based composites for supercapacitor applications. Furthermore, we provide theoretical insights into the electrical properties of PANI composites and their potential as active electrode materials. The need for this review stems from the growing interest in PANI-based composites to improve supercapacitor performance. By examining recent progress in this field, we provide a comprehensive overview of the current state-of-the-art and potential of PANI-based composites for supercapacitor applications. This review adds value by highlighting challenges and opportunities associated with synthesizing and utilizing PANI-based composites, thereby guiding future research directions.

One-Step Electrodeposition of Polyaniline Nanorods on Carbon Cloth for High-Performance Flexible Supercapacitors

The electrochemical performance of the carbon cloth (CC)-based electrodes is determined by the kind, content, morphology, and size of the modified pseudocapacitive materials, as well as the interaction with CC. Also, such structural parameters were mainly dependent on the deposition condition. More uniform polyaniline (PANI) could be obtained by electrochemical polymerization in comparison to chemical oxidation polymerization. However, two steps of electrodeposition were usually needed for nucleation and growth. Here, based on the comprehensive optimization of the electrodeposition condition, well-defined PANI nanorods anchored on the functionalized carbon cloth (FCC) as flexible electrodes (FCC@PANI) were synthesized by a facile one-step electrochemical polymerization. Compared with the FCC electrode, the resultant FCC@PANI-4 sample possessed good cycling stability (98.3% capacitance retention after 10,000 cycles), higher specific capacitances of 2312 mF cm-2 (1.0 mA cm-2) and 107 F g-1 (1.0 A g-1) with the boosting ratio in the areal specific capacitance (CA), and mass specific capacitances (Cm) of 169 and 181%, respectively. The improvement in both specific capacitance and cycling stability was obtained by the strong interaction between the FCC and the modified PANI nanorods with enhanced utilization efficiency of electroactive materials. Furthermore, the symmetric solid-state device assembled using the FCC@PANI-4 electrode delivered a maximum energy density of 0.079 mWh cm-2 at a power density of 0.363 mW cm-2.

Hydrothermal synthesis of polyaniline nanospheres coupled with graphene oxide for enhanced specific capacitance performances

Polyaniline is one of the most common electrode materials for supercapacitors. The morphology of polyaniline directly affects the properties of polyaniline. In this paper, a new method for preparing hollow polyaniline nanospheres is described. Polyaniline-S with solid and hollow structures are successfully synthesized by the hydrothermal method, through varying the amounts of the catalyst and oxidant. The prepared hollow nanospheres have uniform particle size, a smooth surface, and uniform wall thickness. The hollow structure provides rapid permeability to the material, facilitating the transfer and transport of charges and ions in the electrolyte, and it can also act as an ion storage tank to increase the accumulation of ions inside. The specific capacitance of polyaniline-S is high at 235 F g-1 at 0.5 A g-1. To reduce the aggregation of polyaniline-S and improve the electrochemical activity, polyaniline-S, and graphene oxide are composited using the interfacial electrostatic interaction. The content of graphene oxide has a significant influence on the electrochemical performance of the composites. The specific capacitance of the polyaniline-S/ graphene oxide composite with a 10% loading amount of graphene oxide reaches 535 F g-1 at 0.5 A g-1, increase of nearly 128% compared to representing a significant polyaniline-S. The specific capacitance retention rate is 93.6% after 10,000 cycles.

Architecting Nanostructured Co-BTC@GO Composites for Supercapacitor Electrode Application

Herein, we present an innovative graphene oxide (GO)-induced strategy for synthesizing GO-based metal-organic-framework composites (Co-BTC@GO) for high-performance supercapacitors. 1,3,5-Benzene tricarboxylic acid (BTC) is used as an inexpensive organic ligand for the synthesis of composites. An optimal GO dosage was ascertained by the combined analysis of morphology characterization and electrochemical measurement. The 3D Co-BTC@GO composites display a microsphere morphology similar to that of Co-BTC, indicating the framework effect of Co-BTC on GO dispersion. The Co-BTC@GO composites own a stable interface between the electrolyte and electrodes, as well as a better charge transfer path than pristine GO and Co-BTC. A study was conducted to determine the synergistic effects and electrochemical behavior of GO content on Co-BTC. The highest energy storage performance was achieved for Co-BTC@GO 2 (GO dosage is 0.02 g). The maximum specific capacitance was 1144 F/g at 1 A/g, with an excellent rate capability. After 2000 cycles, Co-BTC@GO 2 maintains outstanding life stability of 88.1%. It is expected that this material will throw light on the development of supercapacitor electrodes that hold good electrochemical properties.

Functionalization of pristine graphene for the synthesis of covalent graphene–polyaniline nanocomposite

Polyaniline (PANI) is one of the most studied conducting polymers owing to its high electrical conductivity, straightforward synthesis and stability. Graphene-supported PANI nanocomposite materials combine the superior physical properties of graphene, synergistically enhancing the performance of PANI as well as giving rise to new properties. Covalent nanocomposites have shown to give higher stability and better performance than their non-covalent counterparts, however, the covalent graphene–PANI nanocomposite are primarily prepared from graphene oxide. We report a new method to synthesize covalent graphene–PANI nanocomposites from pristine graphene. Using few-layer graphene (FLG) flakes as the model system, we first conjugated aniline to FLG via a perfluorophenyl azide (PFPA)-mediated coupling chemistry. A subsequent in situ polymerization of aniline gave polyaniline covalently grafted on the FLG surface. Characterization by FTIR, TEM, SEM, XPS, XRD and electrochemistry confirmed the successful conjugation of PANI to FLG. The grafting density of PANI was estimated by thermal analysis to be ∼26%. As the PFPA-mediated coupling chemistry is applicable to other carbon materials including carbon nanotubes and fullerene, the method developed in this work can be readily adapted to grow PANI on these materials.

Polyaniline was covalently grafted on pristine few-layer graphene via a perfluorophenyl azide-mediated coupling chemistry.

Hydrothermal synthesis of PANI nanowires for high-performance supercapacitor

Polyaniline nanowires (PANI NWs) were synthesized under different temperatures through a facile hydrothermal method and used as electrodes for high-performance pseudocapacitor. The resulting samples were analyzed by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron micrographs, thermogravimetric analysis, and X-ray photoelectron spectroscopy. Electrochemical properties of these PANI electrodes are studied by cyclic voltammetry, galvanostatic charge–discharge test, and electrochemical impedance spectroscopy in 0.5M H2SO4 aqueous solution. The highest specific capacitance is obtained on the PANI NWs synthesized under 80°C (PANI-80) with 540.0 F g−1 at current density of 0.5 A g−1 accompanied with 82% specific capacitance retention after 1000 charge discharge cycles at 5 A g−1 current density.

One-pot hydrothermal synthesis of polyaniline nanofibers/reduced graphene oxide nanocomposites and their supercapacitive properties

In this article, polyaniline nanofibers/reduced graphene oxide (PANI-NFs/rGO) nanocomposites were prepared by a one-pot hydrothermal method. Under the condition of high temperature and high pressure, graphene oxide (GO) was reduced to rGO and aniline was in-situ polymerized to form PANI-NFs using ammonium persulfate as oxidant. The morphologies and structures of PANI-NFs/rGO nanocomposites were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR), and Raman analysis. The results show that PANI-NFs uniformly grow on the surfaces of rGO sheets, which can act as spacers to prevent the aggregation of rGO. Combining with FTIR and Raman analysis, it can be concluded that PANI-NFs/rGO nanocomposites are successfully prepared. The electrochemical performances of PANI-NFs/rGO nanocomposites were tested by cyclic voltammetry and galvanostatic charge–discharge. The PANI-NFs/rGO nanocomposites exhibit superior electrochemical performances compared to the PANI-NFs. With 10 wt% of GO loaded, the PANI-NFs/rGO nanocomposite exhibits highest specific capacitance of 942 F g−1 at a current density of 1 A g−1. The PANI-NFs/rGO nanocomposites also demonstrate good rate capacity and high cycling stability under the high discharging current density (10 A g−1), the specific capacitance can still reach to 680 F g−1. After 1000 charge–discharge cycling at a current density of 5 A g−1, 78% of specific capacitance can be retained. The enhanced capacitive performances can be attributed to the facile electron conduction pathway brought by the even distribution of highly conductive rGO nanosheets.

Flexible all-solid-state supercapacitors based on polyaniline orderly nanotubes array

Flexible all-solid-state supercapacitors are crucial to meet the growing needs for portable electronic devices such as foldable phones and wearable electronics. As promising candidates for pseudocapacitor electrode materials, polyaniline (PANI) orderly nanotube arrays are prepared via a simple template electrodeposition method. The structures of the final product were characterized using various characterization techniques, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The obtained PANI nanotube film could be directly used as a flexible all-solid-state supercapacitor electrode. Electrochemical results show that the areal capacitance of a PANI nanotube-based supercapacitor with the deposition cycle number of 100 can achieve a maximum areal capacitance of 237.5 mF cm^-2 at a scan rate of 10 mV s^-1 and maximum energy density of 24.31 mW h cm^-2 at a power density of 2.74 mW cm^-2. In addition, the prepared supercapacitor exhibits excellent flexibility under different bending conditions. It retains 95.2% of its initial capacitance value after 2000 cycles at a current density of 1.0 mA cm^-1, which displays its superior cycling stability. Moreover, the prepared flexible all-solid-state supercapacitor can power a light-emitting-diode (LED), which meets the practical applications of micropower supplies.