Mixed ionic liquids/graphene-supported platinum nanoparticles as an electrocatalyst for methanol oxidation

Reduced Graphene Oxide Quantum Dot Light Emitting Diodes Fabricated Using an Ultraviolet Light Emitting Diode Photolithography Technique

Graphene quantum dots usually suffer from serious fluorescence quenching in aggregates and the solid state due to easy agglomeration and aggregation-induced quenching, which seriously restrict their practical applications. An ingenious strategy to kill three birds with one stone, the ultraviolet (UV) photolithography technique, was studied, and blue-emitting reduced graphene oxide quantum dot (rGOQD)-based light emitting diodes (LEDs) with efficient solid state emission were first fabricated using UV photolithography. First, rGOQDs were prepared by the in situ photoreduction of GOQDs by using the photoinitiator phenyl bis(2,4,6-trimethylbenzoyl)phosphine oxide with 395 nm UV LED exposure. Furthermore, rGOQD/photoresist patterns were prepared under the same conditions. Meanwhile, the in situ photoreduction of GO in the aforementioned photoresist to rGO was realized by UV photolithography to improve the conductivity of the rGOQD/photoresist films. Additionally, the in situ photoreduction of GOQDs in different surroundings was studied, with the results showing that GOQDs are more easily photoreduced in ionic liquids and that the photoluminescence spectrum obtained for rGOQDs exhibits a 70 nm blueshift with a narrow full-width at half-maximum compared to GOQDs.

On the Effects of Diluted and Mixed Ionic Liquids as Liquid Substrates for the Sputter Synthesis of Nanoparticles

The synthesis of nanoparticles by combinatorial sputtering in ionic liquids is a versatile approach for discovering new materials. Whereas the influence on nanoparticle formation of different pure ionic liquids has been addressed, the influence of (I) dilution of ionic liquid with solvents and (II) different mixtures of ionic liquids is less known. Therefore, mixtures of the ionic liquid [Bmim][(Tf)₂N] with the organic solvent anisole and other ionic liquids ([Bmim][(Pf)₂N], [BmPyr][(Tf)₂N]) were used as liquid substrates for the sputter synthesis of nanoparticles, in order to investigate the influence of these mixtures on the size of the nanoparticles. First, mixtures of anisole with a suspension of sputtered Ag nanoparticles in [Bmim][(Tf)₂N] were prepared in different volumetric steps to investigate if the stabilization of the NPs by the ionic liquid could be reduced by the solvent. However, a continuous reduction in nanoparticle size and amount with increasing anisole volume was observed. Second, Ag, Au and Cu were sputtered on ionic liquid mixtures. Ag nanoparticles in [Bmim][(Tf)₂N]/[Bmim][(Pf)₂N] mixtures showed a decrease in size with the increasing volumetric fraction of [Bmim][(Tf)₂N], whereas all nanoparticles obtained from [Bmim][(Tf)₂N]/[BmPyr][(Tf)₂N] mixtures showed increasing size and broadening of the size distribution. Maximum sizes of sputtered Ag and Au NPs were reached in mixtures of [Bmim][(Tf)₂N] with 20 vol.% and 40 vol.% [BmPyr][(Tf)₂N]. The results indicate that ionic liquid mixtures with different portions of cations and anions have the capability of influencing the ionic liquid stabilization characteristics with respect to, e.g., nanoparticle size and size distribution.

Bimetallic alloy and semiconductor support synergistic interaction effects for superior electrochemical catalysis

The design and fabrication of economically viable anode catalysts for the methanol oxidation reaction (MOR) have been challenging issues in direct methanol fuel cells (DMFCs) over the decades. In this work, a composite electrochemical catalyst of Pd-coupled Ag and ZnO for the possible replacement of expensive Pt catalysts in DMFCs is successfully prepared. The as-made Pd@Ag/ZnO exhibits specific activity, which is 1.8-fold, 2.8-fold, and 4.6-fold higher than that of a Pd/ZnO catalyst, 20% Pd/C catalyst and Pd black, respectively. The improvement of the catalytic mechanism is likely due to the synergistic interaction between Pd@Ag and ZnO. The density functional theory (DFT) calculation results confirm that Ag doped into Pd weakens the adsorption of CO, dramatically improving the capability to resist CO poisoning.

One-step synthesis of Pt based electrocatalysts encapsulated by polyoxometalate for methanol oxidation

Pt-based electrocatalysts encapsulated by polyoxometalate were synthesized in one step and showed good performance for the methanol oxidation reaction.

In Situ Generated Platinum Catalyst for Methanol Oxidation via Electrochemical Oxidation of Bis(trifluoromethylsulfonyl)imide Anion in Ionic Liquids at Anaerobic Condition

The bis(trifluoromethylsulfonyl)imide anion is widely used as an ionic liquid anion due to its electrochemical stability and wide electrochemical potential window at aerobic conditions. Here we report an innovative strategy by directly oxidizing bis(trifluoromethylsulfonyl)imide anion to form a radical electrocatalyst on platinum electrode at anaerobic condition. The in situ generated radical catalyst was shown to catalytically and selectively promote the electrooxidation of methanol to form methoxyl radical, in which the formation potential was drastically decreased with the existence of bis(trifluoromethylsulfonyl)imide radical. The electrochemically generated radical catalyst not only facilitates the oxidation of methanol but also provides good selectivity. The unique double layer structure of the 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([Bmpy][NTf₂]) likely excludes the diffusion of larger molar mass molecules onto the electrode surface and enables the highly selective methanol oxidation at this IL-electrode interface. Cyclic voltammetry (CV) experiments were used to systematically characterize the details of the electrochemical processes with and without methanol in several other ILs, and a mechanism of the chemical and redox processes was proposed. This study provides a promising new approach for utilizing the unique properties of ionic liquids not only as solvents and electrolytes but also as the medium for in situ generation of electrocatalysts to promote methanol redox reactions for practical applications.

Monolayer of close-packed Pt nanocrystals on a reduced graphene oxide (RGO) nanosheet and its enhanced catalytic performance towards methanol electrooxidation

A close-packed monolayer composed of (111)-orientated Pt nanocrystals was fabricated on reduced graphene oxide, exhibiting excellent electrocatalytic activity and stability towards methanol oxidation, ~3 times better mass activity than the commercial Pt/C.

The electrochemical synthesis of Pt particles on ZrO2–ERGO modified electrodes with high electrocatalytic performance for methanol oxidation

A schematic representation of methanol oxidation taking place at a Pt/ZrO₂–ERGO electrocatalyst modified electrode.