High performance of mesoporous γ-Fe2O3 nanoparticle/Ketjen Black composite as anode material for lithium ion batteries

Three-Dimensional Core-Branch α-Fe2O3@NiO/Carbon Cloth Heterostructured Electrodes for Flexible Supercapacitors

A convenient and scalable hydrothermal method was developed for the fabrication of the core-branch Fe₂O₃@NiO nanorods arrays directly grown on flexible carbon cloth (denoted as Fe₂O₃@NiO/CC). Such a unique architecture was applied as an electrode of the supercapacitors. As a result, the Fe₂O₃@NiO/CC exhibited a high areal capacitance ~800 mF cm^-2 at 10 mA cm^-2, which was about 10 times increase with respect to Fe₂O₃ nanorods array grown on carbon cloth (Fe₂O₃/CC). The Fe₂O₃@NiO/CC also had the long life cycle (96.8 % capacitance retention after 16,000 cycles) and remarkable rate capability (44.0 % capacitance loss at a very large current density of 100 mA cm^-2). The superior performance of the Fe₂O₃@NiO/CC should be ascribed to the reduction of the contact resistance and the free-standing structure of the flexible electrode. This study provides a novel strategy to construct high-performance flexible electrode materials with unique core-branch structure by incorporating two different pseudocapacitive materials.

Red Mud and Li-Ion Batteries: A Magnetic Connection

Exceptional Li-ion battery performance is presented with the oxide component of the anode was extracted from red mud by simple magnetic separation and applied directly without any further processing. The extracted material has γ-Fe2 O3 as the major phase with inter-dispersed phases of Ti, Al, and Si oxides. In a half-cell assembly, the phase displayed a reversible capacity (∼697 mA h g(-1) ) with excellent stability upon cycling. Interestingly, the stability is rendered by the multiphase constitution of the material with the presence of other electrochemically inactive metal oxides, such as Al2 O3 , SiO2 , and Fe2 TiO4 , which could accommodate the strain and facilitate release during the charge-discharge processes in the electrochemically active maghemite component. We fabricated the full-cell assembly with eco-friendly cathode LiMn2 O4 by adjusting the mass loading. Prior to full-cell assembly, an electrochemical pre-lithiation was enforced to overcome the irreversible capacity loss obtained from the anode. The full-cell delivered a capacity of ∼100 mA h g(-1) (based on cathode loading) with capacity retention of ∼61 % after 2000 cycles under ambient conditions.

Enabling a High Performance of Mesoporous α-Fe2O3 Anodes by Building a Conformal Coating of Cyclized-PAN Network

The mesoporous α-Fe2O3/cyclized-polyacrylonitrile (C-PAN) composite was synthesized by a rapid and facile two-step method. The electrode was fabricated without conductive carbon addictive and employed as anode for lithium-ion batteries. Results demonstrate that building a conformal coating of a C-PAN network can provide a strong adhesion with active materials and contribute excellent electronic conductivity to the electrode, which can relieve the huge volume changes during a lithiation/delithiation process and accelerate the charge transfer rate. The material exhibited high reversible capacity of ca. 996 mAh g(-1) after 100 cycles at 0.2C, 773 mAh g(-1) at 1C and 655 mAh g(-1) at 2C, respectively, showing well-enhanced cycling performance and superior rate capacity, and also exhibiting significantly improved power density and energy density compared to the traditional graphite materials. Our results provide a facile and efficient way to enhance the performance of α-Fe2O3 anode material, which also can be applied for other oxide anode materials.

Solvent-free synthesis of crystalline mesoporous γ-Fe2O3 as an anode material in lithium-ion batteries

As an advanced anode material for lithium ions batteries, crystalline mesoporous γ-Fe₂O₃ with a high surface area was prepared by a novel solvent-free route.

Constructing aligned γ-Fe2O3 nanorods with internal void space anchored on reduced graphene oxide nanosheets for excellent lithium storage

Unique 1D aligned γ-Fe₂O₃ nanorods with internal void spaces anchored on 2D rGO nanosheets were successfully constructed. The resultant nanocomposites of γ-Fe₂O₃/rGO exhibit excellent lithium storage properties.

Nanoporous iron oxide@carbon composites with low carbon content as high-performance anodes for lithium-ion batteries

Nanoporous Fe₂O₃@C nanoparticles with low carbon content as high performance anodes for lithium-ion batteries.

PEG-assisted hydrothermal synthesis and electrochemical performance of ZnO/Ketjenblack nanocomposite for lithium ion batteries

A ZnO/Ketjenblack(KB) composite, exhibiting a special porous structure with ZnO particles embedded in the mesopores of KB, was fabricated. The combined KB acts as a conducting buffering matrix during the lithiation/delithiation process, improving electrochemical performance.