Anodic Stripping Voltammetry at Nanoelectrodes: Trapping of Mn 2+ by Crown Ethers

Novel polymer coating for chemically absorbing CO2 for safe Li-ion battery

Gas evolution in Li-ion batteries remains a barrier for the implementation of high voltage materials in a pouch cell format; the inflation of the pouch cell is a safety issue that can cause battery failure. In particular, for manganese-based materials employed for fabricating cathodes, the dissolution of Mn²⁺ in the electrolyte can accelerate cell degradation, and subsequently gas evolution, of which carbon dioxide (CO₂) is a major component. We report on the utilization of a mixture of polymers that can chemically absorb the CO₂, including the coating of aluminum foils, which serve as trapping sheets, introduced into two Ah pouch cells—based on a LiMnFePO₄ (cathode) and a Li₄Ti₅O₁₂ (anode). The pouch cells with trapping sheets experienced only an 8.0 vol% inflation (2.7 mmol CO₂ per gram of polymers) as opposed to the 40 vol% inflation for the reference sample. Moreover, the cells were cycled for 570 cycles at 1 C and 45 °C before reaching 80% of their retention capacity.

Submicron probes for scanning electrochemical microscopy

To improve the spatial resolutions of scanning electrochemical microscopy (SECM) imaging, the laser-pulled submicron electrode fabrication method was explored in this work. Manual polishing of a laser-pulled Pt nanoelectrode exposed a Pt tip diameter of 250 nm with a ratio of the tip glass to exposed Pt disc (RG) of 30. This fabricated submicron probe was then utilized to study the electrochemical functionality of an independently addressable microband electrodes (IAME) sample using SECM. In the constant imaging mode of SECM, where the probe is scanned linearly across the sample at a fixed z position, SECM demonstrated higher resolution than that of the conventional micrometer electrodes when the feedback currents from the Pt and glass microbands were characterized. In addition, the depth scan imaging mode of SECM was also used to extract experimental horizontal line scans and probe approach curves for analysis. Three-dimensional (3D) simulations of the IAME–SECM probe experiments were explored for the first time to quantify the tip-to-sample distances, tilt angle of the sample (or electrode), and height of the Pt microbands. The experimentally characterized height was found to be similar to manufacturer specification (125 nm vs 110 nm). Furthermore, the more computationally demanding 3D simulation of the true IAME sample geometry (110 nm height of the Pt microbands) revealed minimal difference in feedback behaviours in comparison with the idealized flat geometry. The removal of this simulation complexity was proved to be sufficient for SECM analysis of the IAME sample by a 250 nm Pt probe, which greatly saves computation resources.

Recent advances in the development and application of nanoelectrodes

Nanoelectrodes have key advantages compared to electrodes of conventional size and are the tool of choice for numerous applications in both fundamental electrochemistry research and bioelectrochemical analysis. This Minireview summarizes recent advances in the development, characterization, and use of nanoelectrodes in nanoscale electroanalytical chemistry. Methods of nanoelectrode preparation include laser-pulled glass-sealed metal nanoelectrodes, mass-produced nanoelectrodes, carbon nanotube based and carbon-filled nanopipettes, and tunneling nanoelectrodes. Several new topics of their recent application are covered, which include the use of nanoelectrodes for electrochemical imaging at ultrahigh spatial resolution, imaging with nanoelectrodes and nanopipettes, electrochemical analysis of single cells, single enzymes, and single nanoparticles, and the use of nanoelectrodes to understand single nanobubbles.