Graphene/MnO 2 hybrid film with high capacitive performance

Tin Oxide/Vertically Aligned Graphene Hybrid Electrodes Prepared by Sonication-Assisted Sequential Chemical Bath Deposition for High-Performance Supercapacitors

Hybrid electrodes comprising metal oxides and vertically aligned graphene (VAG) are promising for high-performance supercapacitor applications because they enhance the synergistic effect owing to the large contact area between the two constituent materials. However, it is difficult to form metal oxides (MOs) up to the inner surface of a VAG electrode with a narrow inlet using conventional synthesis methods. Herein, we report a facile approach to fabricate SnO₂ nanoparticle-decorated VAG electrodes (SnO₂@VAG) with excellent areal capacitance and cyclic stability using sonication-assisted sequential chemical bath deposition (S-SCBD). The sonication treatment during the MO decoration process induced a cavitation effect at the narrow inlet of the VAG electrode, allowing the precursor solution to reach the inside of the VAG surface. Furthermore, the sonication treatment promoted MO nucleation on the entire VAG surface. Thus, the SnO₂ nanoparticles uniformly covered the entire electrode surface after the S-SCBD process. SnO₂@VAG exhibited an outstanding areal capacitance (4.40 F cm^-2) up to 58% higher than that of VAG electrodes. The symmetric supercapacitor with SnO₂@VAG electrodes showed an excellent areal capacitance (2.13 F cm^-2) and a cyclic stability of 90% after 2000 cycles. These results suggest a new avenue for sonication-assisted fabrication of hybrid electrodes in the field of energy storage.

Effect of Composition Ratios on the Performance of Graphene/Carbon Nanotube/Manganese Oxide Composites toward Supercapacitor Applications

Herein, we describe the preparation and characterization of graphene/carbon nanotube (CNT)/MnO v composites and the effects of chemical composition and phase transformation on the properties of the corresponding electrode film. In general, the effect of graphene-to-CNT ratio (G/C ratio) and the manganese (Mn) content on the morphology, chemical state, crystallization properties, and microstructure of the composite material was examined by scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and selected area electron diffraction. The bonding mechanism between MnO v and graphite-based materials, that is, graphene and CNTs, is discussed. The influence of the composition of the composites on the performance of the electrode was investigated using charge-discharge curves. The faradically active MnO v also functioned as a considerable cobinder and allowed for a reduced amount of polymeric binder, which enhanced the conductivity and capacitance of the electrode. The optimized electrode composition was obtained based on our present graphene and CNT specifications. In summary, the results discussed in this article provide significant background information for future applications of graphene/CNT/MnO v composite electrodes.

Graphene and activated carbon-wrapped and Co3O4-intercalated 3D sandwich nanostructure hybrid for high-performance supercapacitance

The graphene/Co₃O₄/activated carbon (GCA) 1 : 9 capacitor shows the best electrochemical properties with Co₃O₄ particles that were homogeneously dispersed between the graphene/Co₃O₄ (GC) layers.

Synthesis of Ag nanoparticles decorated MnO2/sulfonated graphene composites with 3D macroporous structure for high performance capacitors electrode materials

3D porous Ag–MnO₂/SG composites with high rate performance and low charge transfer resistance was synthesized.

Facile one-pot synthesis of a NiMoO4/reduced graphene oxide composite as a pseudocapacitor with superior performance

A hybrid NiMoO₄/rGO composite was successfully synthesized by a facile one-pot hydrothermal method.

Recent advances in the fabrication and structure-specific applications of graphene-based inorganic hybrid membranes

The preparation and applications of graphene (G)-based materials are attracting increasing interests due to their unique electronic, optical, magnetic, thermal, and mechanical properties. Compared to G-based hybrid and composite materials, G-based inorganic hybrid membrane (GIHM) offers enormous advantages ascribed to their facile synthesis, planar two-dimensional multilayer structure, high specific surface area, and mechanical stability, as well as their unique optical and mechanical properties. In this review, we report the recent advances in the technical fabrication and structure-specific applications of GIHMs with desirable thickness and compositions. In addition, the advantages and disadvantages of the methods utilized for creating GIHMs are discussed in detail. Finally, the potential applications and key challenges of GIHMs for future technical applications are mentioned.