Boron-doped graphene as high-performance electrocatalyst for the simultaneously electrochemical determination of hydroquinone and catechol

Electrochemistry of Flavonoids: A Comprehensive Review

Flavonoids represent a large group of aromatic amino acids that are extensively disseminated in plants. More than six thousand different flavonoids have been isolated and identified. They are important components of the human diet, presenting a broad spectrum of health benefits, including antibacterial, antiviral, antimicrobial, antineoplastic, anti-mutagenic, anti-inflammatory, anti-allergic, immunomodulatory, vasodilatory and cardioprotective properties. They are now considered indispensable compounds in the healthcare, food, pharmaceutical, cosmetic and biotechnology industries. All flavonoids are electroactive, and a relationship between their electron-transfer properties and radical-scavenging activity has been highlighted. This review seeks to provide a comprehensive overview concerning the electron-transfer reactions in flavonoids, from the point of view of their in-vitro antioxidant mode of action. Flavonoid redox behavior is related to the oxidation of the phenolic hydroxy groups present in their structures. The fundamental principles concerning the redox behavior of flavonoids will be described, and the phenol moiety oxidation pathways and the effect of substituents and experimental conditions on flavonoid electrochemical behavior will be discussed. The final sections will focus on the electroanalysis of flavonoids in natural products and their identification in highly complex matrixes, such as fruits, vegetables, beverages, food supplements, pharmaceutical compounds and human body fluids, relevant for food quality control, nutrition, and healthcare research.

Insights into the Design and Electrocatalytic Activity of Magnesium Aluminum Layered Double Hydroxides: Application to Nonenzymatic Catechol Sensor

The design of an efficient electrocatalyst for effective trace level determinations of noxious synthetic and or biological compounds is the unceasingly noteworthy conceptual approach for rapid technology. In this work, we designed a magnesium-aluminum layered double hydroxides (Mg-Al LDHs) nanocatalyst and applied it to the electrocatalytic determination of an extremely carcinogenic catechol sensor. A coprecipitation method was employed for synthesizing the nanocatalyst, and the structure, porous nature, and morphology were confirmed by X-ray diffraction, Fourier transform infrared spectroscopy, N₂ adsorption-desorption isotherm, field emission-scanning electron microscopy, and transmission electron microscopy. The elemental composition was observed by energy dispersive X-ray analysis. The electrochemical studies were investigated with the help of cyclic voltammetry and differential pulse voltammetry techniques. The Mg-Al LDHs-based electrocatalyst was used to detect catechol by electrochemical measurements with different parameters. The proposed catechol sensor shows a wide dynamic range (0.007-200 μM) with a lower level of detection (2.3 nm) and sensitivity (3.57 μA μM^-1 cm^-2). The excellent sensor performance is attributed to the high surface area, fast electron transfer, more active sites, and excellent flexibility. This study depicts the proposed sensor as probable to practical in a scientific investigation. In addition, the modified electrode showed greater selectivity and was used in the detection of fatal contaminants in instant treatment strategies. Moreover, the Mg-Al LDHs confirmed auspicious real sample scrutiny with noteworthy retrieval outcomes in lake water samples which exposed improved consequences.

Barium titanate nanoparticle-based disposable sensor for nanomolar level detection of the haematotoxic pollutant quinol in aquatic systems

Barium titanate nanoparticles synthesized by a simple co-precipitation method and applied for the electrochemical detection of quinol.

Simultaneous electrochemical sensing of dihydroxy benzene isomers at cost-effective allura red polymeric film modified glassy carbon electrode

Background

A simple and simultaneous electrochemical sensing platform was fabricated by electropolymerization of allura red on glassy carbon electrode (GCE) for the interference-free detection of dihydroxy benzene isomers.

Methods

The modified working electrode was characterized by electrochemical and field emission scanning electron microscopy methods. The modified electrode showed excellent electrocatalytic activity for the electrooxidation of catechol (CC) and hydroquinone (HQ) at physiological pH of 7.4 by cyclic voltammetric (CV) and differential pulse voltammetric (DPV) techniques.

Results

The effective split in the overlapped oxidation signal of CC and HQ was achieved in a binary mixture with peak to peak separation of 0.102 V and 0.103 V by CV and DPV techniques. The electrode kinetics was found to be adsorption-controlled. The oxidation potential directly depends on the pH of the buffer solution, and it witnessed the transfer of equal number of protons and electrons in the redox phenomenon.

Conclusions

The limit of detection (LOD) for CC and HQ was calculated to be 0.126 μM and 0.132 μM in the linear range of 0 to 80.0 μM and 0 to 110.0 μM, respectively, by ultra-sensitive DPV technique. The practical applicability of the proposed sensor was evaluated for tap water sample analysis, and good recovery rates were observed.

Graphical abstract

Electrocatalytic interaction of ALR/GCE with dihydroxy benzene isomers.

Potentiometric polyphenol oxidase biosensor for sensitive determination of phenolic micropollutant in environmental samples

The present study demonstrates the development of polyphenol oxidase (PPO) biosensor for the detection of catechol using strontium copper oxide (SrCuO₂) and polypyrrole nanotubes (PPyNT) matrix. The SrCuO₂ micro-seeds, a perovskite compound, are synthesized by co-precipitation under pH 8.0. The as-synthesized micro-seeds are characterized by scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction spectroscopy (XRD). The proposed sensor is fabricated on pencil graphite (P-Gr) by successive deposition of PPyNT, SrCuO₂, and PPO enzyme. The developed PPO/SrCuO₂/PPyNT/P-Gr sensor is characterized by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS) techniques. The PPO/SrCuO₂/PPyNT/P-Gr displayed excellent electrocatalytic activity towards the oxidation and detection of catechol. The as-developed sensor showed sensitive response ascribing to limit of detection (LOD) of 0.15 μM and sensitivity of 15.60 μA μM^-1 cm^-2. The fabricated sensor exhibited excellent repeatability and longer shelf life. The proposed biosensor finds its application within the broad linear range of 1-50 μM. Real sample analysis of mineral water, tap water, and domestic wastewater using developed sensor showed acceptable recovery. Hence, the biosensor endeavors its application in environmental monitoring and protection.

Natural phenolic antioxidants electrochemistry: Towards a new food science methodology

Natural phenolic compounds are abundant in the vegetable kingdom, occurring mainly as secondary metabolites in a wide variety of chemical structures. Around 10,000 different plant phenolic derivatives have been isolated and identified. This review provides an exhaustive overview concerning the electron transfer reactions in natural polyphenols, from the point of view of their in vitro antioxidant and/or pro-oxidant mode of action, as well as their identification in highly complex matrixes, for example, fruits, vegetables, wine, food supplements, relevant for food quality control, nutrition, and health research. The accurate assessment of polyphenols' redox behavior is essential, and the application of the electrochemical methods in routine quality control of natural products and foods, where the polyphenols antioxidant activity needs to be quantified in vitro, is of the utmost importance. The phenol moiety oxidation pathways and the effect of substituents and experimental conditions on their electrochemical behavior will be reviewed. The fundamental principles concerning the redox behavior of natural polyphenols, specifically flavonoids and other benzopyran derivatives, phenolic acids and ester derivatives, quinones, lignins, tannins, lignans, essential oils, stilbenes, curcuminoids, and chalcones, will be described. The final sections will focus on the electroanalysis of phenolic antioxidants in natural products and the electroanalytical evaluation of in vitro total antioxidant capacity.

Amperometric sensing of catechol by using a nanocomposite prepared from Ag/Ag2O nanoparticles and N,S-doped carbon quantum dots

This work describes the synthesis of a nanocomposite consisting of Ag₂O, silver nanoparticles and N,S-doped carbon quantum dots (Ag₂O/Ag@NS-CQD). The NS-CQD were prepared by hydrothermal treatment of p-aminobenzenesulfonic acid. They act as both the reducing and stabilizing agent for synthesis of Ag₂O/Ag@NS-CQD. The composite was characterized by UV-vis spectroscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The glassy carbon electrode (GCE) was modified by coating it with Ag₂O/Ag@NS-CQD. It exhibits excellent amperometric response to catechol, typically at a low working potential of around 0.25 V. Under the best experimental conditions, the sensor has a wide linear response (0.2 to 180 μM) and a low detection limit (13 nM; at S/N = 3). The method was applied to analysis of spiked water samples and gave satisfactory results. Graphical abstract Schematic representation of the preparation of the Ag/Ag2O@N,S-doped carbon quantum dots composite using p-aminobenzenesulfonic acid and silver nitrate as the starting materials. The corresponding modified glassy carbon electrode exhibits the excellent amperometric sensing performance toward catechol at pH 7.0 with low detection limit and good selectivity.

Strain engineered biocompatible h-WO3 nanofibers based highly selective and sensitive chemiresistive platform for detection of Catechol in blood sample

In this work, we demonstrate a simple, low-cost biocompatible 1D-WO₃ electrospun nanofibers based strain-induced high-performance chemiresistive catechol sensor. WO₃ nanofibers were synthesized using e-spinning, annealed and drop-casted on to flexible PET substrate. X-Ray Diffraction (XRD) studies confirm the formation of Hexagonal phase-WO₃ and Raman spectroscopy proved the presence of O-W-O bending modes. Field emission scanning electron microscopy (FESEM) images displayed the random orientation of dense WO₃ nanofibers on PET substrate. Hall measurements confirmed the formation of n-type WO₃ nanofibers with carrier density of 10¹⁹ cm^-3. The sensor responded to a broad dynamic range of catechol concentrations from 1 μM to 100 μM with sensitivity of 51.29 μM^-1 cm^-2 and limit of detection of 0.52 μM which are better than previously reported catechol sensors. Interestingly, upon application of compressive strain to the flexible sensor, a remarkable increase in sensitivity to 88.34 μM^-1 cm^-2 was observed with further reduction of the limit of detection to 42 nM. Upon subjecting the sensor to strain ranging from 3.14% to 47.6%, an increase in sensitivity to catechol was observed due to the increase in the exposed surface area of interconnected WO₃ nanofibers which enhances the active sites for catechol oxidation by enhancing the tunneling current. The sensor could detect catechol in simulated blood samples with excellent selectivity against AA, UA, Na⁺, Ca⁺, hydroquinone and glucose.

Synergistic effect of a cobalt fluoroporphyrin and graphene oxide on the simultaneous voltammetric determination of catechol and hydroquinone

Graphene oxide (GO) was modified with the cobalt(II) and zinc(II) complexes (CoTFPP and ZnTFPP) of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin in order to improve the electrocatalytic activity of GO towards catechol (CC) and hydroquinone (HQ). It is found that the CoTFPP-modified GO on a glassy carbon electrode (GCE) displays the highest electrocatalytic activity. The response to CC (at 0.14 V vs. SCE) is linear in the 1-220 μM concentration range. The response to HQ (at 0.04 V vs. SCE) extends from 1 μM to 200 μM. The sensitivity and detection limits are 10.40 μA∙μM^-1∙cm^-2 and 0.17 μM for CC, and 8.40 μA∙μM^-1∙cm^-2 and 0.21 μM for HQ. Experimental results indicate that the Co(II) and Zn(II) ions in the porphyrins positively affect the electron transfer rate in the hybrid materials. The GCE modified with CoTFPP/GO was successfully applied to the simultaneous determination of CC and HQ in spiked samples of tap and lake water. Graphical abstract Schematic presentation of a voltammetric method for simultaneous determination of catechol (CC) and hydroquinone (HQ). It is based on the use of a cobalt (II) fluoroporphyrin (CoTFPP) functionalized graphene oxide (GO) hybrid.

3D-Flower-Like Copper Sulfide Nanoflake-Decorated Carbon Nanofragments-Modified Glassy Carbon Electrodes for Simultaneous Electrocatalytic Sensing of Co-existing Hydroquinone and Catechol

A copper sulfide nanoflakes-decorated carbon nanofragments-modified glassy carbon electrode (CuS-CNF/GCE) was fabricated for the electrocatalytic differentiation and determination of hydroquinone (HQ) and catechol (CC). The physicochemical properties of the CuS-CNF were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy. The electrocatalytic determination of HQ and CC over the CuS-CNF/GCE was evaluated by cyclic voltammetry and differential pulse voltammetry. An excellent detection limit and sensitivity of the CuS-CNF/GCE are obtained (0.293 µM and 0.259 µM) with a sensitivity of 184 nA µM⁻¹ cm⁻² and 208 nA µM⁻¹ cm⁻² (S/N=3) for HQ and CC, respectively. In addition, the CuS-CNF/GCE shows a selective identification of HQ and CC over potential interfering metal ions (Zn²⁺, Na⁺, K⁺, NO³⁻, SO₄²⁻, Cl⁻) and organic compounds (ascorbic acid, glucose), and a satisfactory recovery is also obtained in the spiked water samples. These results suggest that the CuS-CNF/GCE can be used as an efficient electrochemical sensor for the simultaneous determination of co-existing environmental pollutants such as HQ and CC in water environments with high selectivity and acceptable reproducibility.

Mesoporous Carbon and Ceria Nanoparticles Composite Modified Electrode for the Simultaneous Determination of Hydroquinone and Catechol

In this work, a novel material that was based on mesoporous carbon and ceria nanoparticles composite (MC–CeNPs) was synthesized, and a modified electrode was fabricated. When compared with a bare glass electrode, the modified electrode exhibited enhanced electrocatalytic activity towards the simultaneous determination of hydroquinone (HQ) and catechol (CC), which is attributed to the large specific area and fast electron transfer ability of MC–CeNPs. Additionally, it exhibited linear response ranges in the concentrations of 0.5–500 µM and 0.4–320 µM for HQ and CC, with detection limits (S/N = 3) of 0.24 µM and 0.13 µM, respectively. This method also displayed good stability and reproducibility. Furthermore, the modified electrode was applied to the simultaneous determination of HQ and CC in tap and lake water samples, and it exhibited satisfactory recovery levels of 98.5–103.2% and 98–103.4% for HQ and CC, respectively. All of these results indicate that a MC–CeNPs modified electrode could be a candidate for the determination of HQ and CC.

Efficient detection of hazardous catechol and hydroquinone with MOF-rGO modified carbon paste electrode

Reduced graphite oxide (rGO) was incorporated into a metal organic framework (MOF) MIL-101(Cr) for the modification of carbon paste electrode. Taking advantages of the large surface area of MOF and the electrical conductivity of rGO, the resulted electrodes exhibited high sensitivity and reliability in the simultaneous electrochemical identification and quantification of catechol (CC) and hydroquinone (HQ). Specifically, in the mixture solution of catechol and hydroquinone (constant concentration of an analyte), the linear response ranges for catechol and hydroquinone were 10-1400 μM and 4-1000 μM, and detection limits were 4 μM and 0.66 μM (S/N = 3) for individual catechol and hydroquinone, respectively. Therefore, the relatively easy fabrication of modified CPE and its fascinating reliability towards HQ and CC detection may simulate more research interest in the applications of MIL-101(Cr)-rGO composites for electrochemical sensors.

Voltammetric sensing based on the use of advanced carbonaceous nanomaterials: a review

This review (with 210 references) summarizes recent developments in the design of voltammetric chemical sensors and biosensors based on the use of carbon nanomaterials (CNMs). It is divided into subsections starting with an introduction into the field and a description of its current state. This is followed by a large section on various types of voltammetric sensors and biosensors using CNMs with subsections on sensors based on the use of carbon nanotubes, graphene, graphene oxides, graphene nanoribbons, fullerenes, ionic liquid composites with CNMs, carbon nanohorns, diamond nanoparticles, carbon dots, carbon nanofibers and mesoporous carbon. The third section gives conclusion and an outlook. Tables are presented on the application of such sensors to voltammetric detection of neurotransmitters, metabolites, dietary minerals, proteins, heavy metals, gaseous molecules, pharmaceuticals, environmental pollutants, food, beverages, cosmetics, commercial goods and drugs of abuse. The authors also describe advanced approaches for the fabrication of robust functional carbon nano(bio)sensors for voltammetric quantification of multiple targets. Graphical Abstract Featuring execellent electrical, catalytic and surface properies, CNMs have gained enormous attention for designing voltammetric sensors and biosensors. Functionalized CNM-modified electrode interfaces have demonstrated their prominent role in biological, environmental, pharmaceutical, chemical, food and industrial analysis.

Simultaneous Detection of Dihydroxybenzene Isomers with ZnO Nanorod/Carbon Cloth Electrodes

Herein, ZnO nanorods with an average diameter of 50 nm were uniformly anchored on the surface of carbon cloth directly by a simple hydrothermal method. The nanorods growing in situ along the specific direction of (002) have single-crystalline features and a columnar structure. On the basis of the ZnO nanorod/carbon cloth composite, free-standing electrodes were fabricated for the simultaneous determination of dihydroxybenzene isomers. The ZnO nanorod/carbon cloth electrodes exhibited excellent electrochemical stability, high sensitivity, and high selectivity. The linear ranges of concentration for hydroquinone, catechol, and resorcinol were 2-30, 2-45, and 2-385 μM, respectively, and the corresponding limits of detection (S/N = 3) were 0.57, 0.81, and 7.2 μM. The outstanding sensing properties of ZnO/carbon cloth electrodes have a great promise for the development of free-standing biosensors and other electrochemical devices.

Photoelectrocatalytic analysis and electrocatalytic determination of hydroquinone by using a Cu2O-reduced graphene oxide nanocomposite modified rotating ring-disk electrode

Reduced graphene oxide (rGO)-based Cu2O nanocomposites were prepared by a facile one-pot reaction process. The surface morphology, structure and chemical composition of Cu2O-rGO nanocomposites were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction. The Cu2O-rGO modified Pt rotating ring-disk electrode (RRDE) was successfully fabricated for the photoelectrocatalytic analysis of hydroquinone (HQ). The photoelectrochemical behaviors of HQ were investigated by the hydrodynamic differential pulse voltammetry technique, using the Cu2O-rGO modified Pt RRDE as the working electrode. The effects of pH values, rotation rates, illumination time and applied bias potential have been discussed. The possible electroactive intermediate product, namely hydroxyhydroquinone, was obtained through the photoelectrocatalytic degradation of HQ on the Cu2O-rGO modified Pt disk electrode, which was compulsively transported and could only be detected at the bare Pt ring electrode at around +0.02 V with an oxidation signal. We found that the peak current at +0.02 V had a good linear relationship with the HQ concentration in the range from 5.0 × 10(-6) to 1.0 × 10(-3) M, with a low limit of detection and excellent reproducibility. The present work has demonstrated that Cu2O-rGO nanocomposites have enhanced photoelectrocatalytic ability for the degradation of organic pollutants and this modified RRDE technique can be potentially applied for the in situ determination of organic pollutants.