Synthesis of Sodium Poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide]-co-ethylacrylate] Solid Polymer Electrolytes

NMR studies of polymeric sodium ion conductors-a brief review

Sodium has long been considered an alternative active battery cation to lithium because of the chemical similarity and the overwhelming natural abundance of Na compared to Li. In the "early days" of poly (ethylene oxide) (PEO) and alkali metal salt complexes proposed as polymer electrolytes, studies of Na-salt/PEO materials were nearly as prevalent as those of lithium analogues. Fast forwarding to the present day, there is growing interest in sodium battery chemistry spurred by the challenges of continued advancement in lithium-based batteries. This article reviews the progress made in sodium-based polymer electrolytes from the early days of PEO to the present time. Other polymeric electrolytes such as gel polymer electrolytes (GPE), including formulations based on ionic liquids (ILs), are also discussed.

Concentrated Nonaqueous Polyelectrolyte Solutions: High Na-Ion Transference Number and Surface-Tethered Polyanion Layer for Sodium-Metal Batteries

Na metal is a promising anode material for the preparation of next-generation high-energy-density sodium-ion batteries; however, the high reactivity of Na metal severely limits the choice of electrolyte. In addition, rapid charge-discharge battery systems require electrolytes with high Na-ion transport properties. Herein, we demonstrate a stable and high-rate sodium-metal battery enabled by a nonaqueous polyelectrolyte solution composed of a weakly coordinating polyanion-type Na salt, poly[(4-styrenesulfonyl)-(trifluoromethanesulfonyl)imide] (poly(NaSTFSI)) copolymerized with butyl acrylate, in a propylene carbonate solution. It was found that this concentrated polyelectrolyte solution exhibited a remarkably high Na-ion transference number (t_Na^PP = 0.9) and a high ionic conductivity (σ = 1.1 mS cm^-1) at 60 °C. Furthermore, the surface of the Na electrode was modified with polyanion chains anchored via the partial decomposition of the electrolyte. The surface-tethered polyanion layer effectively suppressed the subsequent decomposition of the electrolyte, thereby enabling stable Na deposition/dissolution cycling. Finally, an assembled sodium-metal battery with a Na_0.44MnO₂ cathode demonstrated an outstanding charge/discharge reversibility (Coulombic efficiency >99.8%) over 200 cycles while also exhibiting a high discharge rate (i.e., 45% capacity retention at 10 mA cm^-2).

Highly stretchable ionically crosslinked acrylate elastomers inspired by polyelectrolyte complexes

Dynamic bonds are a powerful approach to tailor the mechanical properties of elastomers and introduce shape-memory, self-healing, and recyclability. Among the library of dynamic crosslinks, electrostatic interactions among oppositely charged ions have been shown to enable tough and resilient elastomers and hydrogels. In this work, we investigate the mechanical properties of ionically crosslinked ethyl acrylate-based elastomers assembled from oppositely charged copolymers. Using both infrared and Raman spectroscopy, we confirm that ionic interactions are established among polymer chains. We find that the glass transition temperature of the complex is in between the two individual copolymers, while the complex demonstrates higher stiffness and more recovery, indicating that ionic bonds can strengthen and enhance recovery of these elastomers. We compare cycles to increasing strain levels at different strain rates, and hypothesize that at fast strain rates ionic bonds dynamically break and reform while entanglements do not have time to slip, and at slow strain rates ionic interactions are disrupted and these entanglements slip significantly. Further, we show that a higher ionic to neutral monomer ratio can increase the stiffness, but its effect on recovery is minimal. Finally, taking advantage of the versatility of acrylates, ethyl acrylate is replaced with the more hydrophilic 2-hydroxyethyl acrylate, and the latter is shown to exhibit better recovery and self-healing at a cost of stiffness and strength. The design principles uncovered for these easy-to-manufacture polyelectrolyte complex-inspired bulk materials can be broadly applied to tailor elastomer stiffness, strength, inelastic recovery, and self-healing for various applications.

Sialic acid biosensing by post-printing modification of PEDOT:PSS with pyridylboronic acid

A poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-based conducting polymer, which has biorecognition capabilities, has promising biosensing applications. Previously, we developed a facile method for post-printing chemical modification of PEDOT:PSS thin films from commercial sources. Molecular recognition elements were directly introduced into the PSS side chain by a two-step chemical reaction: introduction of an ethylenediamine linker via an acid chloride reaction of the sulfonate moiety, and subsequent receptor attachment to the linker via amine coupling. In this study, the same method was used to introduce 6-carboxypyridine-3-boronic acid (carboxy-PyBA) into the linker for specifically detecting N-acetylneuraminic acid (sialic acid, SA), as a cancer biomarker. The surface-modified PEDOT:PSS films were characterized by X-ray photoelectron spectroscopy, attenuated total reflection Fourier-transform infrared spectroscopy, and static water contact angle and conductivity measurements. The specific interaction between PyBA and SA was detected by label-free reagent-free potentiometry. The SA-specific negative potential responses of modified PEDOT:PSS electrodes, which was ascribed to an SA carboxyl anion, were observed in a physiologically relevant SA range (1.6-2.9 mM) at pH 5, in a concentration-dependent manner even in the presence of 10% fetal bovine serum. The sensitivity was -2.9 mV/mM in 1-5 mM SA with a limit of detection of 0.7 mM. The sensing performances were almost equivalent to those of existing graphene-based electrical SA sensors. These results show that our chemical derivatization method for printing PEDOT:PSS thin films will have applications in SA clinical diagnostics.

Study of Proton Transport in Diethylmethylammonium Poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide]-Based Composite Membranes with Triflic Acid and Diethylmethylamine-Rich Compositions

The study highlights the effect of acid- and base-rich conditions on the proton dynamics of diethylmethylammonium poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide, [DEMA][PSTFSI], a polymerized protic ionic liquid designed as a polymer electrolyte for nonhumidified polymer electrolyte membrane fuel cells. Different proportions of triflic acid (HTf) and diethylmethylamine (DEMA) were added to the pristine polymer. The thermal analysis of the mixtures revealed that the addition of the base increases the glassy/amorphous nature of the polymer; however, HTf plasticizes the polymer and lowers the T_g value, so that it falls outside of the differential scanning calorimetry-studied temperature range. 50 mol % doping of the HTf contents increases the conductivity upto 0.952 mS cm^-1, and 50 mol % DEMA mixture has a conductivity of 0.169 mS cm^-1 at 100 °C. Vogel-Tamman-Fulcher fitting of the ionic conductivities of the doped systems suggested that the ionic conductivities are completely decoupled from segmental motion of the polymer. A combination of Fourier transform infrared and static NMR studies demonstrated that HTf-added polymer composites show conduction via Grotthuss and vehicular mechanisms, while DEMA-added polymer composites show predominantly a Grotthuss mechanism by developing the aggregates of proton and added base.

Nonmonotonic Influence of Size of Quaternary Ammonium Countercations on Micromorphology, Polarization, and Electroresponse of Anionic Poly(ionic liquid)s

The size influence of quaternary ammonium countercations in poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide][tetraalkylammonium] (P[STFSI][Nnnnn], n = 1, 2, and 3) poly(ionic liquid)s on dielectric polarization and the stimuli-responsive electrorheological effect is investigated by dielectric spectroscopy and rheology, and the microstructure-level understanding behind the influence is analyzed by Raman and X-ray scattering spectra. The size influence of quaternary ammonium cations is found to be nonmonotonic. The largest electrorheological effect accompanied by best polarization properties is demonstrated in P[STFSI][N2222]. Raman spectra and activation energy measurements demonstrate that the nonmonotonic influence originates from the fact that, compared to small N1111⁺ and large N3333⁺, intermediate N2222⁺ as countercations can contribute a higher mobile ion number and lower activation energy barrier of ion dissociation and motion. But the experimental values of activation energy are not consistent with theoretically calculated values by considering the ion pair electrostatic potential and elastic force contribution of the matrix. By X-ray scattering and diffraction characterizations, it is clarified that the nonmonotonic influence and the inconsistency of activation energy originate from the size influence of Nnnnn⁺ on the micromorphology of P[STFSI][Nnnnn]. Compared to the semicrystalline structure of P[STFSI][N1111] and the ionic aggregation structure of P[STFSI][N3333], the relatively uniform amorphous structure of P[STFSI][N2222] may be responsible for its lower activation energy barrier of ion motion. This study further provides insights into the design and preparation of future poly(ionic liquid)-based electrorheological materials by considering not only molecular structure but also micromorphology.

Safety-Enhanced Polymer Electrolytes for Sodium Batteries: Recent Progress and Perspectives

Sodium batteries (SBs) have aroused increasing attention due to the abundance and low cost of elemental sodium. In recent decades, intensive efforts have been under way to exploit advanced SBs for practical applications. However, conventional liquid electrolytes used in SBs suffer from serious safety hazards (high volatility, inflammability, and leakage), severe side reactions between electrodes and electrolytes, and inevitable sodium dendrite problems, which are greatly detrimental to battery performance. Notably, polymer electrolytes are recognized as the optimal solution to resolve the above-mentioned bottlenecks. Herein, we mainly summarize a series of polymer electrolytes based on polymers containing ethoxylated units, poly(vinylidene fluoride-hexafluoropropylene) (P(VDF-HFP)), poly(methyl methacrylate) (PMMA), polyacrylonitrile (PAN), poly(vinylpyrrolidone) (PVP), single-ion conductors, polysaccharides, and so on. Notably, this review demonstrates the natural merits of polymer electrolytes for SBs (such as high safety, suppression of sodium dendrite formation, and reduced electrolyte decomposition), presents the requirements for ideal polymer electrolytes for the first time, and provides concrete discussions into recent progress of various polymer electrolytes as well. Furthermore, potential challenges and perspectives of polymer electrolytes for advanced SBs are also envisioned at the end of this review. Overall, we hope this discussion will make sense to resolve fundamental research and practical issues of polymer electrolytes for advanced SBs.

Proton-Exchange-Induced Configuration Rearrangement in a Poly(ionic liquid) Solution: A NMR Study

Polymeric ionic liquids have emerged recently as a promising alternative to traditional polymers as the polymer electrolyte membrane materials of choice because of their strongly decoupled dynamics between the polymer backbone and the counterions. Knowledge of proton exchange and transport mechanism in such materials is critical to the design and development of new poly(ionic liquid) materials with improved electrochemical properties. Our NMR results show that the proton exchange between the labile proton of the diethylmethylammonium (NH122) cation and H₂O molecules is accompanied by a concerted configuration rearrangement of the ammonium. Through a combination of PFG-NMR and proton relaxation (line width) analysis, we demonstrate that at lower temperatures the labile proton diffuses along with the NH122 ammonium cation as an integral unit, whereas at higher temperatures the NH/H₂O proton exchange sets in gradually, and the PFG-NMR measured diffusion coefficient is a population-averaged value between the two exchanging sites.

Fluorine-free electrolytes for all-solid sodium-ion batteries based on percyano-substituted organic salts

A new family of fluorine-free solid-polymer electrolytes, for use in sodium-ion battery applications, is presented. Three novel sodium salts withdiffuse negative charges: sodium pentacyanopropenide (NaPCPI), sodium 2,3,4,5-tetracyanopirolate (NaTCP) and sodium 2,4,5-tricyanoimidazolate (NaTIM) were designed andtested in a poly(ethylene oxide) (PEO) matrix as polymer electrolytes for anall-solid sodium-ion battery. Due to unique, non-covalent structural configurations of anions, improved ionic conductivities were observed. As an example, "liquid-like" high conductivities (>1 mS cm-1) were obtained above 70 °C for solid-polymer electrolyte with a PEO to NaTCP molar ratio of 16:1. All presented salts showed high thermal stability and suitable windows of electrochemical stability between 3 and 5 V. These new anions open a new class of compounds with non-covalent structure for electrolytes system applications.

Single-Ion Block Copoly(ionic liquid)s as Electrolytes for All-Solid State Lithium Batteries

Polymer electrolytes have been proposed as replacement for conventional liquid electrolytes in lithium-ion batteries (LIBs) due to their intrinsic enhanced safety. Nevertheless, the power delivery of these materials is limited by the concentration gradient of the lithium salt. Single-ion conducting polyelectrolytes represent the ideal solution since their nature prevents polarization phenomena. Herein, the preparation of a new family of single-ion conducting block copolymer polyelectrolytes via reversible addition-fragmentation chain transfer polymerization technique is reported. These copolymers comprise poly(lithium 1-[3-(methacryloyloxy)propylsulfonyl]-1-(trifluoromethylsulfonyl)imide) and poly(ethylene glycol) methyl ether methacrylate blocks. The obtained polyelectrolytes show low Tg values in the range of -61 to 0.6 °C, comparatively high ionic conductivity (up to 2.3 × 10(-6) and 1.2 × 10(-5) S cm(-1) at 25 and 55 °C, respectively), wide electrochemical stability (up to 4.5 V versus Li(+)/Li), and a lithium-ion transference number close to unity (0.83). Owing to the combination of all mentioned properties, the prepared polymer materials were used as solid polyelectrolytes and as binders in the elaboration of lithium-metal battery prototypes with high charge/discharge efficiency and excellent specific capacity (up to 130 mAh g(-1)) at C/15 rate.

Vinyl monomers bearing a sulfonyl(trifluoromethane sulfonyl) imide group: synthesis and polymerization using nitroxide-mediated polymerization

A series of water-soluble styrene and propyl (meth)acrylate based monomers bearing a sulfonyl(trifluoromethane sulfonyl) imide (STFSI) group was prepared.