Vanadium-doping of LiFePO4/carbon composite cathode materials synthesized with organophosphorus source

Internal Vanadium Doping and External Modification Design of P2-Type Layered Mn-Based Oxides as Competitive Cathodes toward Sodium-Ion Batteries

P2-type layered manganese-based oxides have attracted considerable interest as economical, cathode materials with high energy density for sodium-ion batteries (SIBs). Despite their potential, these materials still face challenges related to sluggish kinetics and structural instability. In this study, a composite cathode material, Na0.67Ni0.23Mn0.67V0.1O2@Na3V2O2(PO4)2F was developed by surface-coating P2-type Na0.67Ni0.23Mn0.67V0.1O2 with a thin layer of Na3V2O2(PO4)2F to enhance both the electrochemical sodium storage and material air stability. The optimized Na0.67Ni0.23Mn0.67V0.1O2@5wt %Na3V2O2(PO4)2F exhibited a high discharge capacity of 176 mA h g-1 within the 1.5-4.1 V range at a low current density of 17 mA g-1. At an increased current density of 850 mA g-1 within the same voltage window, it still delivered a substantial initial discharge capacity of 112 mAh g-1. These findings validate the significant enhancement of ion diffusion capabilities and rate performance in the P2-type Na0.67Ni0.33Mn0.67O2 material conferred by the composite cathode.

Controlled Hydrothermal/Solvothermal Synthesis of High-Performance LiFePO4 for Li-Ion Batteries

The sluggish Li-ion diffusivity in LiFePO₄ , a famous cathode material, relies heavily on the employment of a broad spectrum of modifications to accelerate the slow kinetics, including size and orientation control, coating with electron-conducting layer, aliovalent ion doping, and defect control. These strategies are generally implemented by employing the hydrothermal/solvothermal synthesis, as reflected by the hundreds of publications on hydrothermal/solvothermal synthesis in recent years. However, LiFePO₄ is far from the level of controllable preparation, due to the lack of the understanding of the relations between the synthesis condition and the nucleation-and-growth of LiFePO₄ . In this paper, the recent progress in controlled hydrothermal/solvothermal synthesis of LiFePO₄ is first summarized, before an insight into the relations between the synthesis condition and the nucleation-and-growth of LiFePO₄ is obtained. Thereafter, a review over surface decoration, lattice substitution, and defect control is provided. Moreover, new research directions and future trends are also discussed.

Y–F co-doping behavior of LiFePO4/C nanocomposites for high-rate lithium-ion batteries

Lithium iron phosphate (LFP) has become one of the current mainstream cathode materials due to its high safety and low price.

Influence of cycling profile, depth of discharge and temperature on commercial LFP/C cell ageing: post-mortem material analysis of structure, morphology and chemical composition

Abstract

The paper presents post-mortem analysis of commercial LiFePO4 battery cells, which are aged at 55 °C and − 20 °C using dynamic current profiles and different depth of discharges (DOD). Post-mortem analysis focuses on the structure of the electrodes using atomic force microscopy (AFM) and scanning electron microscopy (SEM) and the chemical composition changes using energy dispersive X-ray spectroscopy (SEM-EDX) and X-ray photoelectron spectroscopy (XPS). The results show that ageing at lower DOD results in higher capacity fading compared to higher DOD cycling. The anode surface aged at 55 °C forms a dense cover on the graphite flakes, while at the anode surface aged at − 20 °C lithium plating and LiF crystals are observed. As expected, Fe dissolution from the cathode and deposition on the anode are observed for the ageing performed at 55 °C, while Fe dissolution and deposition are not observed at − 20 °C. Using atomic force microscopy (AFM), the surface conductivity is examined, which shows only minor degradation for the cathodes aged at − 20 °C. The cathodes aged at 55 °C exhibit micrometer size agglomerates of nanometer particles on the cathode surface. The results indicate that cycling at higher SOC ranges is more detrimental and low temperature cycling mainly affects the anode by the formation of plated Li.

Graphic abstract

Synthesis of nano-sized urchin-shaped LiFePO4 for lithium ion batteries

In this article, the facile synthesis of sea urchin-shaped LiFePO4 nanoparticles by thermal decomposition of metal-surfactant complexes and application of these nanoparticles as a cathode in lithium ion secondary batteries is demonstrated. The advantages of this work are a facile method to synthesize interesting LiFePO4 nanostructures and its synthetic mechanism. Accordingly, the morphology of LiFePO4 particles could be regulated by the injection of oleylamine, with other surfactants and phosphoric acid. This injection step was critical to tailor the morphology of LiFePO4 particles, converting them from nanosphere shapes to diverse types of urchin-shaped nanoparticles. Electron microscopy analysis showed that the overall dimension of the urchin-shaped LiFePO4 particles varied from 300 nm to 2 μm. A closer observation revealed that numerous thin nanorods ranging from 5 to 20 nm in diameter were attached to the nanoparticles. The hierarchical nanostructure of these urchin-shaped LiFePO4 particles mitigated the low tap density problem. In addition, the nanorods less than 20 nm attached to the edge of urchin-shaped nanoparticles significantly increased the pathways for electronic transport.

Enhancement of the Rate Capability of LiFePO4 by a New Highly Graphitic Carbon-Coating Method

Low lithium ion diffusivity and poor electronic conductivity are two major drawbacks for the wide application of LiFePO4 in high-power lithium ion batteries. In this work, we report a facile and efficient carbon-coating method to prepare LiFePO4/graphitic carbon composites by in situ carbonization of perylene-3,4,9,10-tetracarboxylic dianhydride during calcination. Perylene-3,4,9,10-tetracarboxylic dianhydride containing naphthalene rings can be easily converted to highly graphitic carbon during thermal treatment. The ultrathin layer of highly graphitic carbon coating drastically increased the electronic conductivity of LiFePO4. The short pathway along the [010] direction of LiFePO4 nanoplates could decrease the Li(+) ion diffusion path. In favor of the high electronic conductivity and short lithium ion diffusion distance, the LiFePO4/graphitic carbon composites exhibit an excellent cycling stability at high current rates at room temperature and superior performance at low temperature (-20 °C).

Vanadium-doped lithium-rich layered-structured cathode material Li1.2Ni0.2Mn0.6O2 with a high specific capacity and improved rate performance

Fine powders of Li_1.2Ni_0.2Mn_0.6−xV_xO₂ (x = 0, 0.002, 0.005, 0.01, 0.02) are prepared by a thermopolymerization method.

Two-step synthesis of nanocomposite LiFePO4/C cathode materials for lithium ion batteries

A LiFePO₄/C nanocomposite was fabricated via a novel two-step method, which effectively controlled the particle size.

Insights into mesoporous metal phosphonate hybrid materials for catalysis

Mesoporous metal phosphonates have received increasing attention as promising heterogeneous catalysts due to their abundant framework compositions and controllable porosity.