Enhancing photoelectrical performance of dye–sensitized solar cell by doping SrTiO 3 :Sm 3+ @SiO 2 core–shell nanoparticles in the photoanode

Enhanced Photodecomposition of Methylene Blue in Water with Sr1−xKxTiO3−δ@PC-polyHIPEs under UV and Visible Light

Photocatalytic method was investigated to remove water pollutant methylene blue (MB) produced in textile, plastic, and dye industries. PC-polyHIPEs were prepared by light-induced polymerization of dopamine in transparent polyHIPEs which were synthesized by polymerization within high internal phase emulsions. Sr1-xKxTiO3-δ (x = 0–0.5) nanoparticles were incorporated and adhered to PC-polyHIPEs to form Sr1-xKxTiO3-δ@PC-polyHIPEs for the first time. The catalysts were characterized by XRD, FTIR, TGA, UV-Vis DRS, and SEM and their photocatalytic properties for MB decomposition were measured over UV-Vis spectrometer. The PC-polyHIPEs were of interconnected porous structure with around 100 μm pores and 30 μm windows. Sr1−xKxTiO3−δ@PC-polyHIPEs showed excellent MB decomposition activity under either UV or visible light although Sr1−xKxTiO3−δ alone worked only under UV light. When x = 0.3, Sr1−xKxTiO3−δ@PC-polyHIPEs showed the highest photocatalytic performance due to the existence of more oxygen vacancies. When the water solution with 50 mg L−1 MB and 1.6 gcat. L−1 Sr0.7K0.3TiO3−δ@PC-polyHIPEs was exposed to visible light for 160 min at room temperature, 88.3% of MB was decomposed. After being used for eight cycles, 87.6% activity of fresh Sr0.7K0.3TiO3−δ@PC-polyHIPEs still remained. The influences of salinity, temperature, and catalyst concentration on the catalytic activity were studied. For MB decomposition under visible light, the activation energy of Sr0.7K0.3TiO3−δ@PC-polyHIPEs was calculated to be 12.3 kJ mol−1 and the kinetics analysis revealed that the photocatalysis followed the second-order reaction. These findings demonstrated that Sr1−xKxTiO3−δ@PC-polyHIPEs were an effective candidate for real application in decomposition of MB in water.

Luminescent Spectral Conversion to Improve the Performance of Dye-Sensitized Solar Cells

Relative to the broadband solar spectrum, a narrow range of spectral absorption of photovoltaic (PV) devices is considered an important determinant that the efficiency of light harvesting of these devices is less than unity. Having the narrowest spectral response to solar radiation among all PV devices, dye-sensitized solar cells (DSSCs) suffer severely from this loss. Luminescent spectral conversion provides a mechanism to manipulate and to adapt the incident solar spectrum by converting, through photoluminescence, the energies of solar photons into those that are more effectively captured by a PV device. This mechanism is particularly helpful for DSSCs because there is much flexibility in both the choice of the light-harvesting materials and the architecture of the DSSC. Here we review and discuss recent advances in the field of luminescent spectral conversion for DSSCs. The focus is on the architectural design of DSSCs, and the complications, advantages and new functionalities offered by each of their configurations are discussed. The loss mechanisms are examined and important parameters governing the spectral conversion mechanism of a DSSC are introduced.