Facile preparation and performance of hierarchical self-assembly MnCo2O4 nanoflakes as anode active material for lithium ion batteries

A Review of Cobalt-Containing Nanomaterials, Carbon Nanomaterials and Their Composites in Preparation Methods and Application

With the increasing demand for sustainable and green energy, electric energy storage technologies have received enough attention and extensive research. Among them, Li-ion batteries (LIBs) are widely used because of their excellent performance, but in practical applications, the electrochemical performance of electrode materials is not satisfactory. Carbon-based materials with high chemical stability, strong conductivity, high specific surface area, and good capacity retention are traditional anode materials in electrochemical energy storage devices, while cobalt-based nano-materials have been widely used in LIBs anodes because of their high theoretical specific capacity. This paper gives a systematic summary of the state of research of cobalt-containing nanomaterials, carbon nanomaterials, and their composites in LIBs anodes. Moreover, the preparation methods of electrode materials and measures to improve electrochemical performance are also summarized. The electrochemical performance of anode materials can be significantly improved by compounding carbon nanomaterials with cobalt nanomaterials. Composite materials have better electrical conductivity, as well as higher cycle ability and reversibility than single materials, and the synergistic effect between them can explain this phenomenon. In addition, the electrochemical performance of materials can be significantly improved by adjusting the microstructure of materials (especially preparing them into porous structures). Among the different microscopic morphologies of materials, porous structure can provide more positions for chimerism of lithium ions, shorten the diffusion distance between electrons and ions, and thus promote the transfer of lithium ions and the diffusion of electrolytes.

Facile Synthesis of Flower-Like MnCo2 O4 @PANi-rGO: A High-Performance Anode Material for Lithium-Ion Batteries

Flower-like MnCo₂ O₄ was prepared in a self-assembly process and used in the formation of MnCo₂ O₄ @polyaniline (MnCo₂ O₄ @PANi) that proceeds by a simple in situ polymerization. The MnCo₂ O₄ @PANi-reduced graphite oxide (MnCo₂ O₄ @PANi-rGO) composite was then synthesized by introducing rGO into MnCo₂ O₄ @PANi. This modification improves the overall electronic conductivity of the MnCo₂ O₄ @PANi-rGO because of the dual conductive functions of rGO and PANi; it also provides a buffer for the changes in electrode volume during cycling, thus improving the lithium-storage performance of MnCo₂ O₄ @PANi-rGO. The electrochemical performance of the samples was evaluated by charge/discharge cycling testing, cyclic voltammetry, and electrochemical impedance spectroscopy. MnCo₂ O₄ @PANi-rGO delivers a discharge capacity of 745 mAh g^-1 and a Coulombic efficiency of 100 % after 1050 cycles at a current density of 500 mA g^-1 , and is a promising anode material for lithium-ion batteries.

MOF-derived hollow NiCo2O4 nanowires as stable Li-ion battery anodes

Although binary metal oxides with high theoretical specific capacities and power densities are widely investigated as promising anode materials for lithium-ion batteries (LIBs), their poor cycling stability and huge volume expansion largely limit their extensive application in practical electrode materials. Herein, we report a facile strategy to synthesize hollow NiCo2O4 nanowires through direct calcination of binary metal-organic frameworks (MOFs) in air. When evaluated as an anode material for LIBs, NiCo2O4 nanowires deliver a reversible capacity of 1310 mA h g-1 at a current density of 100 mA g-1 after 100 cycles. Even at a high current density of 1 A g-1, NiCo2O4 nanowires exhibit long-term cycling stability with a capacity of 720 mA h g-1 after 1000 cycles. The outstanding lithium-storage performance can be attributed to the unique structures with 1D porous channels, which are beneficial for the fast transfer of Li+ ions and electrolyte and alleviate the strain caused by the volume expansion during cycling processes.

Electro-deposition of nickel–iron nanoparticles on flower-like MnCo2O4 nanowires as an efficient bifunctional electrocatalyst for overall water splitting

The obtained NiFe–MnCo₂O₄/NFF electrode exhibited superior electrocatalytic performance and extraordinary durability for the OER, HER, and overall water splitting.

Metal-Oleate Complex-Derived Bimetallic Oxides Nanoparticles Encapsulated in 3D Graphene Networks as Anodes for Efficient Lithium Storage with Pseudocapacitance

In this manuscript, we have demonstrated the delicate design and synthesis of bimetallic oxides nanoparticles derived from metal-oleate complex embedded in 3D graphene networks (MnO/CoMn₂O₄ ⊂ GN), as an anode material for lithium ion batteries. The novel synthesis of the MnO/CoMn₂O₄ ⊂ GN consists of thermal decomposition of metal-oleate complex containing cobalt and manganese metals and oleate ligand, forming bimetallic oxides nanoparticles, followed by a self-assembly route with reduced graphene oxides. The MnO/CoMn₂O₄ ⊂ GN composite, with a unique architecture of bimetallic oxides nanoparticles encapsulated in 3D graphene networks, rationally integrates several benefits including shortening the diffusion path of Li⁺ ions, improving electrical conductivity and mitigating volume variation during cycling. Studies show that the electrochemical reaction processes of MnO/CoMn₂O₄ ⊂ GN electrodes are dominated by the pseudocapacitive behavior, leading to fast Li⁺ charge/discharge reactions. As a result, the MnO/CoMn₂O₄ ⊂ GN manifests high initial specific capacity, stable cycling performance, and excellent rate capability.

An urchin-like MgCo2O4@PPy core-shell composite grown on Ni foam for a high-performance all-solid-state asymmetric supercapacitor

In recent years, the electrochemical properties of supercapacitors have been greatly improved due to continuous improvement in their composite materials. In this study, an urchin-like MgCo2O4@PPy/NF (MgCo2O4@polypyrrole/Ni foam) core-shell structure composite material was successfully developed as an electrode for supercapacitors. The MCP-2 composite material, obtained by a hydrothermal method and in situ chemical oxidative polymerization, shows a high specific capacitance of 1079.6 F g-1 at a current density of 1 A g-1, which is much higher than that of MC (783.6 F g-1) under the same conditions. Simultaneously, it has low resistance and an excellent cycling stability of 97.4% after 1000 cycles. Furthermore, an all-solid-state asymmetric supercapacitor (ASC) was assembled using MCP-2 as the positive electrode and activated carbon (AC) as the negative electrode. The MCP-2//AC ASC exhibits high specific capacitance (94 F g-1 at a current density of 0.4 A g-1), high energy density (33.4 W h kg-1 at a power density of 320 W kg-1), high volumetric energy density (17.18 mW h cm-3 at a volumetric power density of 0.16 W cm-3) and excellent cycling stability (retaining 91% of the initial value after 10 000 cycles). Simultaneously, the device has low leakage current and excellent self-discharge characteristics. All these results indicate that the MCP-2//AC ASC is a good energy storage device; it can support the function of two LEDs for 20 minutes. These results indicate that the MCP-2//AC ASC will play an important role in energy structures in the future.

Rational design of MnCo2O4@NC@MnO2 three-layered core–shell octahedron for high-rate and long-life lithium storage

With the depletion of fossil energy and rapid development of electronic equipment, the commercial lithium-ion batteries (LIBs) do not meet the current energy demand.

Synthesis of porous MnCo2O4 microspheres with yolk–shell structure induced by concentration gradient and the effect on their performance in electrochemical energy storage

In this study, novel spherical yolk–shell MnCo₂O₄ powders with concentration gradient have been synthesized.

Metal-Organic Frameworks Derived Porous Core/Shell Structured ZnO/ZnCo2O4/C Hybrids as Anodes for High-Performance Lithium-Ion Battery

Metal-organic frameworks (MOFs) derived porous core/shell ZnO/ZnCo2O4/C hybrids with ZnO as a core and ZnCo2O4 as a shell are for the first time fabricated by using core/shell ZnCo-MOF precursors as reactant templates. The unique MOFs-derived core/shell structured ZnO/ZnCo2O4/C hybrids are assembled from nanoparticles of ZnO and ZnCo2O4, with homogeneous carbon layers coated on the surface of the ZnCo2O4 shell. When acting as anode materials for lithium-ion batteries (LIBs), the MOFs-derived porous ZnO/ZnCo2O4/C anodes exhibit outstanding cycling stability, high Coulombic efficiency, and remarkable rate capability. The excellent electrochemical performance of the ZnO/ZnCo2O4/C LIB anodes can be attributed to the synergistic effect of the porous structure of the MOFs-derived core/shell ZnO/ZnCo2O4/C and homogeneous carbon layer coating on the surface of the ZnCo2O4 shells. The hierarchically porous core/shell structure offers abundant active sites, enhances the electrode/electrolyte contact area, provides abundant channels for electrolyte penetration, and also alleviates the structure decomposition induced by Li(+) insertion/extraction. The carbon layers effectively improve the conductivity of the hybrids and thus enhance the electron transfer rate, efficiently prevent ZnCo2O4 from aggregation and disintegration, and partially buffer the stress induced by the volume change during cycles. This strategy may shed light on designing new MOF-based hybrid electrodes for energy storage and conversion devices.