Yeast bio-template synthesis of porous anatase TiO2 and potential application as an anode for sodium-ion batteries

Mesoporous Ti4O7 Spheres with Enhanced Zinc-Anchoring Effect for High-Performance Zinc-Nickel Batteries

Zinc-nickel batteries are promising competitors for next-generation power supply due to their benefits of high safety, high working voltage, and attractive rate performance. However, their practical applications are plagued by their poor cycling performance, stemming from uneven redistribution of zinc during cycling that results in dendrite formation and shape changes of the electrode. In this work, mesoporous Ti₄O₇ microspheres are prepared and are employed as additives of a zinc anode. Notably, the presence of mesopores provides abundant chemisorption sites for Zn(OH)₄^2- ions, inhibiting severe zinc redistribution in the electrode. Moreover, due to the good electrical conductivity and mesopores that serve as ion diffusion channels, the reaction reactivity and reversibility of the zinc electrode are greatly facilitated. As a result, the fabricated zinc-nickel battery with mesoporous Ti₄O₇ additives (ms-Ti₄O₇) exhibits an enhanced discharge capacity and a significantly prolonged cycling life. Even at a current of 10 A (∼138 mA cm^-2), the ms-Ti₄O₇-modified anode demonstrates stable operation for longer than 718 h (700 cycles) with a discharge voltage of 1.2 V, which is much longer than those of a ZnO anode (192 h, 117 cycles) and a Ti₄O₇-particle (p-Ti₄O₇)-modified battery (590 h, 443 cycles). Furthermore, due to the anchoring effect for Zn(OH)₄^2- and the uniform electric field, the effect of mesoporous Ti₄O₇ on inhibiting dendrite formation and shape change of the zinc electrode is highlighted.

Preparation of Hybrid Sol-Gel Materials Based on Living Cells of Microorganisms and Their Application in Nanotechnology

Microorganism-cell-based biohybrid materials have attracted considerable attention over the last several decades. They are applied in a broad spectrum of areas, such as nanotechnologies, environmental biotechnology, biomedicine, synthetic chemistry, and bioelectronics. Sol-gel technology allows us to obtain a wide range of high-purity materials from nanopowders to thin-film coatings with high efficiency and low cost, which makes it one of the preferred techniques for creating organic-inorganic matrices for biocomponent immobilization. This review focuses on the synthesis and application of hybrid sol-gel materials obtained by encapsulation of microorganism cells in an inorganic matrix based on silicon, aluminum, and transition metals. The type of immobilized cells, precursors used, types of nanomaterials obtained, and their practical applications were analyzed in detail. In addition, techniques for increasing the microorganism effective time of functioning and the possibility of using sol-gel hybrid materials in catalysis are discussed.

Towards enhanced sodium storage of anatase TiO2via a dual-modification approach of Mo doping combined with AlF3 coating

Recent studies on anatase TiO₂ have demonstrated its capability of performing as an anode material for sodium-ion batteries (SIBs) even though, due to poor conductivity, realistic applications have not yet been foreseen. In order to try to address this issue, herein, we shall introduce a cost effective and facile route based on the co-precipitation method for the synthesis of Mo-doped anatase TiO₂ nanoparticles with AlF₃ surface coating. The electrochemical measurements demonstrate that the Mo-doped anatase TiO₂ nanoparticles deliver an ∼40% enhanced reversible capacity compared to pristine TiO₂ (139.8 vs. 100.7 mA h g^-1 at 0.1 C after 50 cycles) due to an improved electronic/ionic conductivity. Furthermore, upon AlF₃ coating, the overall system can deliver a much higher reversible capacity of 178.9 mA h g^-1 (∼80% increase with respect to pristine TiO₂) with good cycling stability and excellent rate capabilities of up to 10 C. The experimental results indicate that the AlF₃ surface coating could indeed effectively reduce the solid electrolyte interfacial resistance, enhance the electrochemical reactivity at the surface/interface region, and lower the polarization during cycling. The improved performance achieved using a cost-effective fabrication approach makes the dually modified anatase TiO₂ a promising anode material for high-performance SIBs.

Recent advances in the synthesis of hierarchically mesoporous TiO2 materials for energy and environmental applications

Because of their low cost, natural abundance, environmental benignity, plentiful polymorphs, good chemical stability and excellent optical properties, TiO₂ materials are of great importance in the areas of physics, chemistry and material science. Much effort has been devoted to the synthesis of TiO₂ nanomaterials for various applications. Among them, mesoporous TiO₂ materials, especially with hierarchically porous structures, show great potential owing to their extraordinarily high surface areas, large pore volumes, tunable pore structures and morphologies, and nanoscale effects. This review aims to provide an overview of the synthesis and applications of hierarchically mesoporous TiO₂ materials. In the first section, the general synthetic strategies for hierarchically mesoporous TiO₂ materials are reviewed. After that, we summarize the architectures of hierarchically mesoporous TiO₂ materials, including nanofibers, nanosheets, microparticles, films, spheres, core-shell and multi-level structures. At the same time, the corresponding mechanisms and the key factors for the controllable synthesis are highlighted. Following this, the applications of hierarchically mesoporous TiO₂ materials in terms of energy storage and environmental protection, including photocatalytic degradation of pollutants, photocatalytic fuel generation, photoelectrochemical water splitting, catalyst support, lithium-ion batteries and sodium-ion batteries, are discussed. Finally, we outline the challenges and future directions of research and development in this area.

Microbial synthesis of hollow porous Prussian blue@yeast microspheres and their synergistic enhancement of organic pollutant removal performance

In this work, Prussian blue nanoparticles (PB NPs) were in situ grown on S. cerevisiae cells via one-step hydrothermal synthesis and the as-prepared Prussian blue@yeast (PB@yeast) hybrids exhibited synergistic adsorption and Fenton catalytic activities. FE-SEM, XRD and BET analysis of the prepared samples confirmed the successful formation of hollow porous structured PB@yeast microspheres, while FT-IR and XPS spectra indicated the fine structures were occupied by both functional adsorptive and catalytic sites. The experimental results of adsorption coupled Fenton reaction of PB@yeast hybrid microspheres revealed that the functional groups on the cell wall and the active iron sites in PB framework were fully utilized due to the triple synergistic effects of adsorption-Fenton catalysis-adsorption sites regeneration, thus endowing synergistically enhanced performance in removal of the selected cationic methylene blue (MB), anionic Methyl Orange (MO) and fluorescent brightener 71 (CXT) in aqueous solution. The high Fenton catalytic efficiency was related to the improvement of adsorption, in which the enrichment of contaminant molecules on the outer and inner surface of the hollow porous microspheres could lower mass transfer resistance and shorten charge transport pathways, thereby introducing more efficient Fenton catalytic activity than PB NPs.

Amorphous Red Phosphorus Embedded in Sandwiched Porous Carbon Enabling Superior Sodium Storage Performances

The red P anode for sodium ion batteries has attracted great attention recently due to the high theoretical capacity, but the poor intrinsic electronic conductivity and large volume expansion restrain its widespread applications. Herein, the red P is successfully encapsulated into the cube shaped sandwich-like interconnected porous carbon building (denoted as P@C-GO/MOF-5) via the vaporization-condensation method. Superior cycling stability (high capacity retention of about 93% at 2 A g^-1 after 100 cycles) and excellent rate performance (502 mAh g^-1 at 10 A g^-1 ) can be obtained for the P@C-GO/MOF-5 electrode. The superior electrochemical performance can be ascribed to the successful incorporation of red P into the unique carbon matrix with large surface area and pore volume, interconnected porous structure, excellent electronic conductivity and superior structural stability.

Synthesis, characterization and photocatalytic activity of mixed-metal oxides derived from NiCoFe ternary layered double hydroxides

Ternary NiCoFe mixed-metal oxides have demonstrated higher photoelectrocatalytic activity in degrading methylene blue (MB).

Synthesis and photoelectrocatalytic activity of In2O3 hollow microspheres via a bio-template route using yeast templates

In₂O₃ hollow microspheres synthesized using yeast as a bio-template with the aid of a precipitation method have demonstrated higher photoelectrocatalytic activity in degrading methylene blue (MB).

Multichannel Porous TiO2 Hollow Nanofibers with Rich Oxygen Vacancies and High Grain Boundary Density Enabling Superior Sodium Storage Performance

TiO₂ as an anode for sodium-ion batteries (NIBs) has attracted much recent attention, but poor cyclability and rate performance remain problematic owing to the intrinsic electronic conductivity and the sluggish diffusivity of Na ions in the TiO₂ matrix. Herein, a simple process is demonstrated to improve the sodium storage performance of TiO₂ by fabricating a 1D, multichannel, porous binary-phase anatase-TiO₂ -rutile-TiO₂ composite with oxygen-deficient and high grain-boundary density (denoted as a-TiO_2-x /r-TiO_2-x ) via electrospinning and subsequent vacuum treatment. The introduction of oxygen vacancies in the TiO₂ matrix enables enhanced intrinsic electronic conductivity and fast sodium-ion diffusion kinetics. The porous structure offers easy access of the liquid electrolyte and a short transport path of Na⁺ through the pores toward the TiO₂ nanoparticle. Furthermore, the high density of grain boundaries between the anatase TiO₂ and rutile TiO₂ offer more interfaces for a novel interfacial storage. The a-TiO_2-x /r-TiO_2-x shows excellent long cycling stability (134 mAh g^-1 at 10 C after 4500 cycles) and superior rate performance (93 mAh g^-1 after 4500 cycles at 20 C) for sodium-ion batteries. This simple and effective process could serve as a model for the modification of other materials applied in energy storage systems and other fields.