CeO2 nanorods with high energy surfaces as electrocatalytical supports for methanol electrooxidation

Interfacial engineering of nickel selenide with CeO2 on N-doped carbon nanosheets for efficient methanol and urea electro-oxidation

The design of low cost, high efficiency electrocatalysts for methanol oxidation reactions (MOR) and urea oxidation reactions (UOR) is a pressing need to address the energy crisis and water pollution. In the present work, we developed Cerium dioxide (CeO2) and nickel selenide (Ni0.85Se) nanoparticles integrated into three-dimensional N-doped carbon nanosheets to be used as efficient and stable bifunctional electrocatalysts for MOR and UOR. By optimizing the selenization temperature, the CeO2-modified Ni0.85Se obtained at selenization temperature of 550 °C (CeO2-Ni0.85Se-550-NC) has the best MOR and UOR electrochemical performance. The CeO2-Ni0.85Se-550-NC potential only requires 1.309 V (MOR) and 1.294 V (UOR) to reach 10 mA cm-2, respectively. The DFT study reveals that CeO2-Ni0.85Se-550-NC has the best reaction path with the synergistic effect between CeO2 and Ni0.85Se. The outstanding catalytic performance of CeO2-Ni0.85Se-550-NC may be due to the cointeraction between CeO2 and Ni0.85Se, allowing more defects that function as catalytic sites while promoting fast electron transfer in the N-doped carbon substrate.

The in situ etching assisted synthesis of Pt-Fe-Mn ternary alloys with high-index facets as efficient catalysts for electro-oxidation reactions

Pt-Based alloys enclosed with high-index facets (HIFs) generally show much higher specific catalytic activities than their counterparts with low-index facets in electro-catalytic reactions. However, the exposure of a certain Pt surface would require a well-defined nanostructure, which usually can only be obtained at larger sizes. Therefore, a low dispersion of Pt atoms in Pt-based alloys with HIFs would affect the atomic utilization of Pt, resulting in most of these Pt-based alloys exhibiting lower mass activity than commercial Pt/C and Pt black catalysts for electro-catalytic reactions. Herein, we address a novel strategy to divide the surface areas of larger sized nanocrystals into small surface area nanocrystals by in situ etching Pt-Fe-Mn concave cubes (CNCs) while maintaining the morphology of the Pt-Fe-Mn alloys to improve the utilization of Pt atoms and thus increase the mass activity. Remarkably, the Pt-Fe-Mn unique concave cube (UCNC) nanocrystals (NCs) showed much higher specific and mass activities toward the methanol oxidation reaction (MOR) than the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The kinetic analysis from Tafel plots indicated that UCNC Pt-Fe-Mn NCs had the lowest Tafel slope at whole potentials and the splitting of the first C-H bond of a CH3OH molecule with the first electron transfer was the rate-determining step at high potentials (above 0.45 V). In situ Fourier transform infrared reflection (FTIR) spectroscopic investigation at the molecular level indicated that methanol chemical absorption took place at a low potential of -0.2 V at the UCNC NC electrode. Meanwhile, much higher CO2 productivity was observed at the UCNC NC electrode, indicating the strong anti-poisoning ability of the UCNC Pt-Fe-Mn NCs during methanol electrooxidation. Furthermore, in the formic acid oxidation (FAOR) test, the activity and long-term durability of the Pt-Fe-Mn UCNC NCs were also found to be superior to those of the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The enhanced catalytic performance in both the MOR and FAOR is most probably due to the unique HIF structure consisting of small sized particles, enhanced Pt utilization, the richness of crystalline defects and synergetic effects of Pt, Fe, and Mn metals. Our present work provides an insight into the rational design of Pt based alloys with HIFs to improve the catalytic performance of electro-catalytic reactions for fundamental study.

Ultrasensitive Electrochemical Detection of Clostridium perfringens DNA Based Morphology-Dependent DNA Adsorption Properties of CeO₂ Nanorods in Dairy Products

Foodborne pathogens such as Clostridium perfringens can cause diverse illnesses and seriously threaten to human health, yet far less attention has been given to detecting these pathogenic bacteria. Herein, two morphologies of nanoceria were synthesized via adjusting the concentration of NaOH, and CeO₂ nanorod has been utilized as sensing material to achieve sensitive and selective detection of C. perfringens DNA sequence due to its strong adsorption ability towards DNA compared to nanoparticle. The DNA probe was tightly immobilized on CeO₂/chitosan modified electrode surface via metal coordination, and the DNA surface density was 2.51 × 10^−10 mol/cm². Under optimal experimental conditions, the electrochemical impedance biosensor displays favorable selectivity toward target DNA in comparison with base-mismatched and non-complementary DNA. The dynamic linear range of the proposed biosensor for detecting oligonucleotide sequence of Clostridium perfringens was from 1.0 × 10^−14 to 1.0 × 10^−7 mol/L. The detection limit was 7.06 × 10^−15 mol/L. In comparison, differential pulse voltammetry (DPV) method quantified the target DNA with a detection limit of 1.95 × 10^−15 mol/L. Moreover, the DNA biosensor could detect C. perfringens extracted DNA in dairy products and provided a potential application in food quality control.

α-Fe2O3 nanospheres: facile synthesis and highly efficient photo-degradation of organic dyes and surface activation by nano-Pt for enhanced methanol sensing

Hematite α-Fe₂O₃ thin films have been deposited on FTO coated glass substrates. The films were found to perform efficiently towards electrochemical sensing of methanol and photodegradation of toxic dyes, viz. Indigo Carmine and Rhodamine B.