Highly conductive, porous RuO2/activated carbon nanofiber composites containing graphene for electrochemical capacitor electrodes

Fabrication and assembly of supercapacitors based on Ni-based MOFs and their derivative materials for enhancing their electrochemical performances

Metal-organic frameworks (MOFs) are a class of porous materials that have been gradually applied in the field of supercapacitors, but they still present major challenges due to their inherent instability and poor conductivity. Herein, in order to solve these problems, Ni-based MOFs and their derivative materials with a particular spherical structure were prepared using a special calcination method. This unique structure not only improves the conductivity of the electrode, but also promotes the transport of electrons and ions during the electrochemical energy storage process. The as-prepared Ni-MOF@M-a4 has an amazing specific capacitance (637.78 F g-1) and a relatively low impedance. The fabricated asymmetric supercapacitor (ASC) consisted of Ni-MOF@M-a4 and activated carbon (AC) as positive and negative electrodes, respectively. The specific capacitance of this ASC was 18.14 F g-1. The maximum energy and power densities of the device reached 1.23 W h kg-1 and 175.00 W kg-1, showing good electrochemical performance. In this work, both an innovative strategy for the rational preparation of MOF arrays with good orientation and a special material preparation method are proposed, which have promising application potential in the field of asymmetric supercapacitors.

Synthesis of Binder-Free, Low-Resistant Randomly Orientated Nanorod/Sheet ZnS-MoS2 as Electrode Materials for Portable Energy Storage Applications

The scientific community needs to conduct research on novel electrodes for portable energy storage (PES) devices like supercapacitors (S-Cs) and lithium-ion batteries (Li-ion-Bs) to overcome energy crises, especially in rural areas where no electrical poles are available. Herein, the nanostructured MoS2 and ZnS-MoS2 E-Ms consisting of nanoparticles/rods/sheets (N-Ps-Rs-Ss) are deposited on hierarchical nickel foam by a homemade chemical vapor deposition (H-M CVD) route. The X-ray diffraction patterns confirm the formation of polycrystalline films growing along various orientations, whereas the field-emission scanning electron microscope analysis confirms the formation of N-Ps-Rs-Ss. The change in structural and microstructural parameters indicates the existence of defects improving the energy storage ability of the deposited ZnS-MoS2@Ni-F electrodes. The specific capacitances of MoS2@Ni-F and ZnS-MoS2@Ni-F electrodes are found to be 1763 and 3565 F/g at 0.5 mV/s and 1451 and 3032 F/g at 1 A/g, respectively. The growing behavior of impedance graphs indicates their capacitive nature; however, the shifting of impedance curves toward y-axis indicates that the increasing diffusion rates due to the formation of nanostructures of ZnS-MoS2 results in low impedance. An excellent energy storage performance, minimum capacity fading, and improved electrical conductivity of the deposited E-Ms are due to the combined contributions of the electrical double layer and pseudocapacitor nature, which is again confirmed by theoretical Dunn's model. The absence of charge transfer resistance and good capacitance retention (95%) even after 10,000 cycles indicates that the deposited E-Ms are better for PES devices like S-Cs and Li-ion-Bs than MoS2 E-Ms. The assembled asymmetric supercapacitor device exhibited the maximum specific capacitance = 996 F/g, energy density = 354-285 W h/kg, power density = 2400-24,000 W/kg, capacitance retention = 95% and Coulombic efficiency = 100% even after a long charging-discharging of 10,000 cycles.

Solution-processable porous graphitic carbon from bottom-up synthesis and low-temperature graphitization

It is urgently desired yet challenging to synthesize porous graphitic carbon (PGC) in a bottom-up manner while circumventing the need for high-temperature pyrolysis. Here we present an effective and scalable strategy to synthesize PGC through acid-mediated aldol triple condensation followed by low-temperature graphitization. The deliberate structural design enables its graphitization in situ in solution and at low pyrolysis temperature. The resulting material features ultramicroporosity characterized by a sharp pore size distribution. In addition, the pristine homogeneous composition of the reaction mixture allows for solution-processability of the material for further characterization and applications. Thin films of this PGC exhibit several orders of magnitude higher electrical conductivity compared to analogous control materials that are carbonized at the same temperatures. The integration of low-temperature graphitization and solution-processability not only allows for an energy-efficient method for the production and fabrication of PGC, but also paves the way for its wider employment in applications such as electrocatalysis, sensing, and energy storage.

Design and Tailoring of the 3D Macroporous Hydrous RuO2 Hierarchical Architectures with a Hard-Template Method for High-Performance Supercapacitors

In this work, RuO₂ honeycomb networks (RHCs) and hollow spherical structures (RHSs) were rationally designed and synthesized with modified-SiO₂ as a sacrificial template via two hydrothermal approaches. At a high current density of 20 A g^-1, the two hierarchical porous RuO₂·xH₂O frameworks showed the specific capacitance as high as 628 and 597 F g^-1; this is about 80% and 75% of the capacitance retention of 0.5 A g^-1 for RHCs and RHSs, respectively. Even after 4000 cycles at 5 A g^-1, the RHCs and RHSs can still remain at 86% and 91% of their initial specific capacitances, respectively. These two hierarchical frameworks have a well-defined pathway that benefits for the transmission/diffusion of electrolyte and surface redox reactions. As a result, they exhibit good supercapacitor performance in both acid (H₂SO₄) and alkaline (KOH) electrolytes. As compared to RuO₂ bulk structure and similar RuO₂ counterpart reported in pseudocapacitors, the two hierarchical porous RuO₂·xH₂O frameworks have better energy storage capabilities, high-rate performance, and excellent cycling stability.

Ruthenium nanoparticles-modified reduced graphene prepared by a green method for high-performance supercapacitor application in neutral electrolyte

Here, we report a one-pot preparation of a ruthenium-based reduced graphene oxide hybrid (Ru_nano-based RGO) for supercapacitors applications.

Electrospinning of Nanofibers for Energy Applications

With global concerns about the shortage of fossil fuels and environmental issues, the development of efficient and clean energy storage devices has been drastically accelerated. Nanofibers are used widely for energy storage devices due to their high surface areas and porosities. Electrospinning is a versatile and efficient fabrication method for nanofibers. In this review, we mainly focus on the application of electrospun nanofibers on energy storage, such as lithium batteries, fuel cells, dye-sensitized solar cells and supercapacitors. The structure and properties of nanofibers are also summarized systematically. The special morphology of nanofibers prepared by electrospinning is significant to the functional materials for energy storage.