Nano-architectured MnO2 Electrodeposited on the Cu-decorated Nickel Foam substrate as Supercapacitor Electrode with Excellent Areal Capacitance

Effect of calcination temperature on morphology and phase transformation of MnO2 nanoparticles: A step towards green synthesis for reactive dye adsorption

Green synthesis of manganese oxide nanoparticles (NPs) was carried out by sol-gel method using Acacia Concinna fruit extract for removal of reactive dye. The effect of calcination temperature on its morphology was investigated. α-MnO₂ and Mn₃O₄ NPs were synthesized at 400 °C and 900 °C respectively and were characterized by PXRD, SEM, TEM, FTIR, BET, Raman and TGA. As-synthesized MnO₂ NPs were investigated for the adsorption of Reactive Blue 21 (RB-21) dye. The effect of pH, adsorbent dose, agitation speed, initial dye concentration and temperature on dye removal was explored. pH_pzc was calculated from zeta potential study showing positive surface charge below pH 3.18 resulting in electrostatic force of attraction between adsorbate and adsorbent. Both linear and non-linear regression approaches were utilised for the fitting of kinetic models and adsorption isotherms. Adsorption data follows a pseudo second order kinetics and fits well with the Freundlich isotherm model. Thermodynamic parameters such as ΔH^o, ΔS^o and ΔG^o were determined. The dye removal efficiency, in case of MnO₂ NPs at pH 3.0 was obtained to be 98% whereas for Mn₃O₄, no such dye adsorption was observed. The mechanism of adsorption was studied theoretically confirming π-π interaction and H-bonding between the MnO₂ and RB dye molecules.

Influence of nickel doping on MnO2 nanoflowers as electrocatalyst for oxygen reduction reaction

Abstract

Doping is promising strategy for the alteration of nanomaterials to enhance their optical, electrical, and catalytic activities. The development of electrocatalysts for oxygen reduction reactions (ORR) with excellent activity, low cost and durability is essential for the large-scale utilization of energy storage devices such as batteries. In this study, MnO2 and Ni-doped MnO2 nanowires were prepared through a simple co-perception technique. The influence of nickel concentration on electrochemical performance was studied using linear sweep voltammetry and cyclic voltammetry. The morphological, thermal, structural, and optical properties  of MnO2 and Ni-doped MnO2 nanowires were examined by SEM, ICP-OES, FT-IR, XRD, UV–Vis, BET and TGA/DTA. Morphological analyses showed that pure MnO2 and Ni-doped MnO2 had flower-like and nanowire structures, respectively. The XRD study confirmed the phase transformation from ε to α and β phases of MnO2 due to the dopant. It was also noted from the XRD studies that the crystallite sizes of pure MnO2 and Ni-doped MnO2 were in the range of 2.25–6.6 nm. The band gaps of MnO2 and 0.125 M Ni-doped MnO2 nanoparticles were estimated to be 2.78 and 1.74 eV, correspondingly, which can be seen from UV–Vis. FTIR spectroscopy was used to determine the presence of functional groups and M–O bonds (M = Mn, Ni). The TGA/TDA examination showed that Ni-doping in MnO2 led to an improvement in its thermal properties. The cyclic voltammetry  results exhibited that Ni-doped MnO2 nanowires have remarkable catalytic performance for ORR in 0.1 M KOH alkaline conditions. This work contributes to the facile preparation of highly active and durable catalysts with improved catalytic performance mainly due to the predominance of nickel.

Article Highlights

Graphic abstract

Ternary flower-sphere-like MnO2-graphite/reduced graphene oxide nanocomposites for supercapacitor

Chemical fabrication of a nanocomposite structure for electrode materials to regulate the ion diffusion channels and charge transfer resistances and Faradaic active sites is a versatile strategy towards building a high-performance supercapacitor. Here, a new ternary flower-sphere-like nanocomposite MnO₂-graphite (MG)/reduced graphene oxide (RGO) was designed using the RGO as a coating for the MG. MnO₂-graphite (MnO₂-4) was obtained by KMnO₄ oxidizing the pretreated graphite in an acidic medium (pH = 4). The GO coating was finally reduced by the NaBH₄ to prepare the ternary nanocomposite MG. The microstructures and pore sizes were investigated by x-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and nitrogen adsorption/desorption. The electrochemical properties of MG were systematically investigated by the cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy in Na₂SO₄ solution. The MG as an electrode material for supercapacitor exhibits a specific capacitance of 478.2 and 454.6 F g^-1 at a current density of 1.0 and 10.0 A g^-1, respectively. In addition, the capacitance retention was 90% after 8,000 cycles. The ternary nanocomposite enhanced electrochemical performance originates from the specific flower-sphere-like morphology and coating architecture bringing higher specific surface area and lower charge transfer resistance (R_ct).

A Review on Nano-/Microstructured Materials Constructed by Electrochemical Technologies for Supercapacitors

The article reviews the recent progress of electrochemical techniques on synthesizing nano-/microstructures as supercapacitor electrodes. With a history of more than a century, electrochemical techniques have evolved from metal plating since their inception to versatile synthesis tools for electrochemically active materials of diverse morphologies, compositions, and functions. The review begins with tutorials on the operating mechanisms of five commonly used electrochemical techniques, including cyclic voltammetry, potentiostatic deposition, galvanostatic deposition, pulse deposition, and electrophoretic deposition, followed by thorough surveys of the nano-/microstructured materials synthesized electrochemically. Specifically, representative synthesis mechanisms and the state-of-the-art electrochemical performances of exfoliated graphene, conducting polymers, metal oxides, metal sulfides, and their composites are surveyed. The article concludes with summaries of the unique merits, potential challenges, and associated opportunities of electrochemical synthesis techniques for electrode materials in supercapacitors.

Nile Blue Functionalized Graphene Aerogel as a Pseudocapacitive Negative Electrode Material across the Full pH Range

The pursuit of new negative electrode materials for redox supercapacitors with a high capacitance, boosted energy, and high rate capability is still a tremendous challenge. Herein, we report a Nile Blue conjugated graphene aerogel (NB-GA) as a negative electrode material with excellent pseudocapacitive performance (with specific capacitance of up to 483 F g^-1 at 1 A g^-1) in all acidic, neutral, and alkaline aqueous electrolytes. The contribution from capacitive charge storage represents 93.4% of the total charge, surpassing the best pseudocapacitors known. To assess the feasibility of NB-GA as a negative electrode material across the full pH range, we fabricated three devices, namely, a symmetric NB-GA||NB-GA device in an acidic (1.0 M H₂SO₄) electrolyte, an NB-GA||MnO₂ device in a pH-neutral (1.0 M Na₂SO₄) electrolyte, and an NB-GA||LDH (LDH = Ni-Co-Fe layered double hydroxide) device in an alkaline (1.0 M KOH) electrolyte. The NB-GA||NB-GA device exhibits a maximum specific energy of 22.1 Wh kg^-1 and a specific power of up to 8.1 kW kg^-1; the NB-GA||MnO₂ device displays a maximum specific energy of 55.5 Wh kg^-1 and a specific power of up to 14.9 kW kg^-1, and the NB-GA||LDH device shows a maximum specific energy of 108.5 Wh kg^-1 and a specific power of up to 25.1 kW kg^-1. All the devices maintain excellent stability over 5000 charge-discharge cycles. The outstanding pseudocapacitive performances of the NB-GA nanocomposites render them a highly promising negative electrode material across the entire pH range.

CNT/High Mass Loading MnO2/Graphene-Grafted Carbon Cloth Electrodes for High-Energy Asymmetric Supercapacitors

Flexible supercapacitor electrodes with high mass loading are crucial for obtaining favorable electrochemical performance but still challenging due to sluggish electron and ion transport. Herein, rationally designed CNT/MnO₂/graphene-grafted carbon cloth electrodes are prepared by a "graft-deposit-coat" strategy. Due to the large surface area and good conductivity, graphene grafted on carbon cloth offers additional surface areas for the uniform deposition of MnO₂ (9.1 mg cm^-2) and facilitates charge transfer. Meanwhile, the nanostructured MnO₂ provides abundant electroactive sites and short ion transport distance, and CNT coated on MnO₂ acts as interconnected conductive "highways" to accelerate the electron transport, significantly improving redox reaction kinetics. Benefiting from high mass loading of electroactive materials, favorable conductivity, and a porous structure, the electrode achieves large areal capacitances without compromising rate capability. The assembled asymmetric supercapacitor demonstrates a wide working voltage (2.2 V) and high energy density of 10.18 mWh cm^-3.

In Situ Construction of Ag/Ni(OH)2 Composite Electrode by Combining Electroless Deposition Technology with Electrodeposition

The Ag/Ni(OH)2 composite electrode has been designed and in situ constructed on a copper substrate by combining electroless deposition technology with electrodeposition. The products can be directly used as a high performance binder free electrode. The synergistic effect between the Ag nanocubes (AgNCs) as backbones and the deposited Ni(OH)2 as the shell can significantly improve the electrochemical properties of the composite electrode. Moreover, this in situ growth strategy forms a strong bonding force of active materials to the substrate, which can improve the cycling performance and lower the equivalent series resistance. The Ag/Ni(OH)2 composite electrode exhibits enhanced electrochemical properties with a high specific capacitance of 3.704 F cm−2, coulombic efficiency of 88.3% and long-term cyclic stability.

A General Electrode Design Strategy for Flexible Fiber Micro-Pseudocapacitors Combining Ultrahigh Energy and Power Delivery

Herein, a general strategy is proposed to boost the energy storage capability of pseudocapacitive materials (i.e., MnO2) to their theoretical limits in unconventional 1D fiber configuration by rationally designing bicontinuous porous Ni skeleton@metal wire "sheath-core" metallic scaffold as a versatile host. As a proof of concept, the 1D metallic scaffold supported-MnO2 fiber electrode is demonstrated. The proposed "sheath" design not only affords large electrode surface area with ordered macropores for large electrolyte-ion accessibility and high electroactive material loading, but also renders interconnected porous metallic skeleton for efficient electronic and ionic transport, while the metallic "core" functions as an extra current collector to promote long-distance electron transport and electron collection. Benefiting from all these merits, the optimized fiber electrode yields unprecedented specific areal capacitance of 1303.6 mF cm-2 (1278 F g-1 based on MnO2, approaching the theoretical value of 1370 F g-1) in liquid KOH and 847.22 mF cm-2 in polyvinyl alcohol (PVA)/KOH gel electrolyte, 2-350 times of previously reported fiber electrodes. The solid-state fiber micro-pseudocapacitors simultaneously achieve remarkable areal energy and power densities of 18.83 µWh cm-2 and 16.33 mW cm-2, greatly exceeding the existing symmetric fiber supercapacitors, together with long cycle life and high rate capability.

An advanced asymmetric supercapacitor based on a binder-free electrode fabricated from ultrathin CoMoO4 nano-dandelions

Dandelion shaped cobalt molybdenum oxide nanostructures (ND-CoMoO₄) were synthesized through a facile, mild and green hydrothermal method on nickel foam. Binder-free ND-CoMoO₄ electrode showed superior long-term stability and charge capacitance.

Binder-free electrodes of NiMoO4/graphene oxide nanosheets: synthesis, characterization and supercapacitive behavior

In the present work we report a facile and efficient hydrothermal method to fabricate a nanocomposite of NiMoO₄ and graphene nanosheets (NiMoO₄/GNS) on a nickel foam (NF) substrate.