Determination of 5-Hydroxyindole Acetic Acid by Electrochemical Methods with an Oxidized Glassy Carbon Electrode

Regulation of the Metal Center in Lanthanide Nanoparticles to Achieve Multifunctional Sensing

Development of a multifunctional sensor is highly desirable. In this work, traces of a carcinoid cancer biomarker of 5-hydroxyindole-3-acetic acid (5-HIAA) in real human urine can be detected by lanthanide nanoparticle Eu-CFC (CFC = 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydroquinoline-3-carboxylic acid) and the sensing devices of the test paper and agarose gel, achieving an ultralow LOD of 0.8 × 10-3 ppm within a sensing time of 2.0 min. Interestingly, by metal center regulation of Tb and Eu codoping, nanoparticle TbEu2-CFC shows high-sensitivity and low-LOD (0.019% v/v) sensing of water in ethanol. The sensing mechanisms are revealed by both experiments and quantum chemical studies.

Hydrophilic molecularly imprinted resin-hexagonal boron nitride composite as a new adsorbent for selective extraction and determination of a carcinoid tumor biomarker in urine

BACKGROUND

The detection of disease biomarkers in biological samples plays an important role in early diagnosis and treatment of carcinoid tumor. However, due to the complexity of biological samples and the extremely low concentration of disease biomarkers, sample pretreatment is still the bottleneck of achieving accurate quantitative determination. In this work, new hydrophilic molecularly imprinted resin-hexagonal boron nitride (HMIR-h-BN) composites were developed and used as a new solid phase extraction (SPE) adsorbent for selective detection of 5-hydroxyindoleacetic acid (5-HIAA), a biomarker of carcinoid tumor, in urine.

RESULTS

Twenty-two types of HMIR-h-BN were successfully synthesized through growing hydrophilic molecularly imprinted resin on surface of activated two-dimensional h-BN nanosheets, and preparation parameters affecting the adsorption performance of HMIR-h-BN were investigated and optimized through adsorption experiments. HMIR-h-BN #19 (the ratio of resorcinol to hexamethylenetetramine: 6:3; the dosage of h-BN: 300 mg; the dosage of dummy template: 0.12 mmol; the imprinting time: 4 h) has demonstrated to be the optimal material for efficient separation and extraction of 5-HIAA. Combined with HPLC-UV, the limit of detection and the limit of quantification of 5-HIAA in real urine samples were 9.4 ng mL-1 and 31.3 ng mL-1, respectively, the coefficient of determination (R2) was 0.9996 in the linear range of 0.1-300 μg mL-1 and the relative recoveries ranged from 86.9 % to 97.7 % with RSD ≤5.1 %. Moreover, after being processed by HMIR-h-BN-SPE, there are no interferences from other peaks at the peak position of 5-HIAA.

SIGNIFICANCE

The HMIR-h-BN composite has been demonstrated to be capable of selective extraction of 5-HIAA from urine samples and have a significant purification effect. Based on the established HMIR-h-BN-SPE-HPLC-UV method, accurate quantitative determination of 5-HIAA in urine samples was achieved, which is expected to be applied in the early diagnostic of carcinoid tumor.

Smart dual imprinted Origami 3D-ePAD for selective and simultaneous analysis of vanillylmandelic acid and 5-hydroxyindole-3-acetic acid carcinoid cancer biomarkers using graphene quantum dots coated with dual molecularly imprinted polymers

Measuring the levels of the biomarkers vanillylmandelic acid (VMA) and 5-Hydroxyindole-3-acetic acid (5-HIAA) is a valuable tool for clinical diagnosis not only of neuroblastoma or carcinoid syndrome, but also of essential hypertension, depression, migraine, and Tourette's syndrome. Herein, we explore using graphene quantum dots (GQDs) coated with molecularly imprinted polymer (MIP) as novel dual-imprinted sensors for selective and simultaneous determination of VMA and 5-HIAA in urine and plasma samples. The dual-MIP was successfully coated on the GQDs core via co-polymerization of (3-aminopropyl) triethoxysilane (APTES) and tetraethyl orthosilicate (TEOS), acting as functional and cross-linking monomers, respectively. In addition, we successfully created the dual imprinted VMA and 5-HIAA shell on the GQDs' core via a one-pot synthesis. We fabricated a facile and ready-to-use Origami three-dimensional electrochemical paper-based analytical device (Origami 3D-ePAD) for simultaneous determination of VMA and 5-HIAA using a GQDs@dual-MIP modified graphene electrode (GQDs@dual-MIP/SPGE). The Origami 3D-ePAD was designed to form a voltammetric cell on a three-layer foldable sheet with several advantages. For example, they were quickly assembled and enhanced the device's physical durability with the hydrophobic backup sheet. The developed dual imprinted Origami 3D-ePAD leads to substantially enhanced sensitivity and selectivity to electrochemical signal amplification generated from increasing the electrode-specific surface area, electrocatalytic activity, and the large numbers of dual imprinted sites for VMA and 5-HIAA detection. The synthetic recognition sites are highly selective for 5-HIAA and VMA molecules with an imprinting factor of 8.46 and 7.10, respectively. Quantitative analysis relying on square wave voltammetry reveals excellent linear dynamic ranges of around 0.001-25 μM, with detection limits of 0.023 nM for 5-HIAA and 0.047 nM for VMA (3Sb, n = 3). The Origami 3D-ePAD provides high accuracy and precision (i.e., recovery values of 5-HIAA ranged from 82.98 to 98.40 %, and VMA ranged from 83.28 to 104.39 %), and RSD less than 4.37 %) in urine and plasma samples without any evidence of interference. Hence, it is well suited as a facile and ready-to-use disposable device for point-of-care testing. It is straightforward, cost-effective, reproducible, and stable. Furthermore, it allows for rapid analysis (analysis time ∼20s) useful in medical diagnosis and other relevant fields.

Strategy of In Situ Electrochemical Regulation for Highly Enhanced Nonenzymatic Sensing of Carbaryl

Specific and sensitive sensing of most pesticide residues relies on enzymes such as acetylcholinesterase and advanced materials, which need to be loaded on the surface of working electrodes, leading to instability, uneven surface, tedious process, and high cost. Meanwhile, employing certain potential or current in electrolyte solution could also modify the surface in situ and overcome these drawbacks. However, this method is only regarded as electrochemical activation widely applied in the pretreatment of electrodes. In this paper, by means of regulating the electrochemical technique and its parameters, we prepared a proper sensing interface and derivatized the carbaryl (a carbamate pesticide) hydrolyzed form (1-naphthol) to enhance sensing by 100 times within several minutes. After regulation I by chronopotentiometry with 0.2 mA for 20 s or chronoamperometry with 2 V for 10 s, abundant oxygen-containing groups form and the ordered carbon structure is destroyed. Sweeping from -0.5 to 0.9 V through cyclic voltammetry for only one segment, following regulation II, the composition of oxygen-containing groups changes and the disordered structure is alleviated. Finally, on the constructed sensing interface, test by regulation III through differential pulse voltammetry from 0.8 to -0.4 V, resulting in derivatization of 1-naphthol during 0.8-0 V, followed by electroreduction of the derivative at around -0.17 V. Compared with the electro-oxidation peak at 0.5 V in previous reports, it is essential to improve specificity, even toward several other carbamate pesticides with similar structures. Hence, the in situ electrochemical regulation strategy has demonstrated great potential for effective sensing of electroactive molecules.

Tetraphenylpyrazine-Based Luminescent Metal-Organic Framework for Chemical Sensing of Carcinoids Biomarkers

A new non-interpenetrated three-dimensional (3D) pillared-layered TPP-based LMOF [Zn₃(TPyTPP)_0.5(BDC)₃]·8DMF (denoted as Zn-MOF 1) was successfully prepared (TPyTPP = tetrakis(4-(pyridin-4-yl)phenyl)pyrazine and H₂BDC = 1,4-benzenedicarboxylic acid). Zn-MOF 1 was characterized by single-crystal X-ray diffraction, PXRD, IR, N₂ adsorption, thermogravimetric analysis, and luminescent spectrum. Impressively, luminescent sensing studies reveal that activated Zn-MOF 1 not only displays excellent luminescence-quenching efficiency with the values of high K_sv and low LODs toward 5-hydroxytryptamine (5-HT) and 5-hydroxyindole-3-acetic acid (5-HIAA), respectively, but also possesses outstanding sensing characteristics in terms of fast response, high sensitivity, and specific selectivity. Zn-MOF 1 performs as efficient sensing of carcinoid biomarkers to provide a fresh detection platform for the diagnosis of carcinoids. In addition, the sensing mechanism was also explored on the basis of ultraviolet-visible (UV-vis) absorption, DFT calculations, and structural analysis.

Structure Engineering of a Lanthanide-Based Metal-Organic Framework for the Regulation of Dynamic Ranges and Sensitivities for Pheochromocytoma Diagnosis

Exploring innovative technologies to precisely quantify biomolecules is crucial but remains a great challenge for disease diagnosis. Unfortunately, the humoral concentrations of most biotargets generally vary within rather limited scopes between normal and pathological states, while most literature-reported biosensors can detect large spans of targets concentrations, but are less sensitive to small concentration changes, which consequently make them mostly unsatisfactory or even unreliable in distinguishing positives from negatives. Herein, a novel strategy of precisely quantifying the small concentration changes of a certain biotarget by editing the dynamic ranges and sensitivities of a lanthanide-based metal-organic framework (Eu-ZnMOF) biosensor is reported. By elaborately tailoring the biosensor's structure and surface areas, the tunable Eu-ZnMOF is developed with remarkably enhanced response slope within the "optimized useful detection window," enabling it to serve as a powerful signal amplifier (87.2-fold increase) for discriminating the small concentration variation of urinary vanillylmandelic acid (an early pathological signature of pheochromocytoma) within only three times between healthy and diseased subjects. This study provides a facile approach to edit the biosensors' performances through structure engineering, and exhibits promising perspectives for future clinical application in the non-invasive and accurate diagnosis of severe diseases.