Metal@MOF Materials in Electroanalysis: Silver-Enhanced Oxidation Reactivity Towards Nitrophenols Adsorbed into a Zinc Metal Organic Framework—Ag@MOF-5(Zn)

Metal-organic frameworks for biomedical applications: A review

Metal-organic frameworks (MOFs) are emergent materials in diverse prospective biomedical uses, owing to their inherent features such as adjustable pore dimension and volume, well-defined active sites, high surface area, and hybrid structures. The multifunctionality and unique chemical and biological characteristics of MOFs allow them as ideal platforms for sensing numerous emergent biomolecules with real-time monitoring towards the point-of-care applications. This review objects to deliver key insights on the topical developments of MOFs for biomedical applications. The rational design, preparation of stable MOF architectures, chemical and biological properties, biocompatibility, enzyme-mimicking materials, fabrication of biosensor platforms, and the exploration in diagnostic and therapeutic systems are compiled. The state-of-the-art, major challenges, and the imminent perspectives to improve the progressions convoluted outside the proof-of-concept, especially for biosensor platforms, imaging, and photodynamic therapy in biomedical research are also described. The present review may excite the interdisciplinary studies at the juncture of MOFs and biomedicine.

MOF@Polydopamine-incorporated membrane with high permeability and mechanical property for efficient fouling-resistant and oil/water separation

Metal organic frameworks (MOFs) have demonstrated great potential for their favorable impacts on the performance of water treatment membranes. Herein, the novel nanoparticles based on both nanoporous MOFs and organic PDA layer was exploited as a novel dopant for the fabrication of PES ultrafiltration (UF) membranes. The PDA was synthesized via oxidative self-polymerization under alkaline conditions and formed adhesive coatings on dispersed MOF. The properties of resulting membranes on the porosity, membrane morphology, hydrophilicity, permeability and anti-fouling performance were adequately investigated. The membranes incorporated with MOF@PDA exhibited exceptionally high permeability (209.02 L m-2·h-1), which is approximately 6 times higher than that of the pure PES membrane, and high BSA rejection (99.12%). Notably, the mechanical property and hydrophilicity of the PES membrane were both enhanced by MOF@PDA, and it has been demonstrated that greater hydrophilicity prevents fouling under practical conditions, which results in significant improvements in flux recovery ratio (FRR) (82%). In addition, the modified PES membranes were used to purify the oil/water emulsion, and the results indicates that the membranes have high permeability and rejection of oil/water emulsion, showing its great promise in practical oily sewage remediation.

Progress and opportunities for metal-organic framework composites in electrochemical sensors

Metal-organic framework composites have the advantages of large surface area, high porosity, strong catalytic efficiency and good stability, which provide a great possibility of finding excellent electrode materials for electrochemical sensors. However, MOF composites still face various challenges and difficulties, which limit their development and application. This paper reviews the application of MOF composites in electrochemical sensors, including MOF/carbon composites, MOF/metal nanoparticle composites, MOF/metal oxide composites and MOF/enzyme composites. In addition, the application challenges of MOF composites in electrochemical sensors are summarized. Finally, the application prospect for MOF composites is considered to promote the synthesis of more MOF composites with excellent properties.

Structural and anionic effects of microcrystalline Zn-CPs on 4-nitrophenol sensing performances

Coordination polymers (CPs: [ZnL₃]_n(X)_2n, L = trans-1,4-bis(imidazolyl)-2-butene; X⁻ = BF₄⁻, ClO₄⁻, NO₃⁻) allow for detection of the 4-nitrophenol (4-NP) oxidation process by enhanced electrochemical signals. Electrochemical measurement is a highly sensitive method providing much evidence of chemical reactions on an electrode surface. In the present study, we designed and synthesized, with reference to X-ray diffraction data and by spectroscopic analyses, new 3D coordination structures containing imidazolyl donors and zinc(ii). The presence of microcrystals [ZnL₃]_n(BF₄)_2n on the working electrode enhanced the redox signals. Therefore, we propose a simple catalytic process that can explain these results and clarify the influence of anions that constitute CP materials used to improve electrochemical detection applications. The CP materials were characterized by nuclear magnetic resonance (NMR), infrared spectroscopy (IR), thermogravimetric (TG) analyses, single crystal X-ray diffraction (SC-XRD), and electrochemical analyses.

To investigate structural and anionic effects of coordination polymers (CPs) on electrochemical sensors, Zn-CPs were synthesized and used for 4-nitrophenol oxidation sensors.

p-Co-BDC/AuNPs-based multiple signal amplification for ultra-sensitive electrochemical determination of miRNAs

In this work, we report AuNPs-decorated pyrolyzed Co-BDC nanosheets (p-Co-BDC/AuNPs) as high-performance electrocatalyst for developing an electrochemical platform. p-Co-BDC/AuNPs as a new electrocatalyst showed superior electrocatalytic activity towards the electrochemical oxidation of methylene blue (MB). Besides, magnetic p-Co-BDC/AuNPs can be well immobilized on the magnetic glassy carbon electrode without further assistance. The oxidation of MB can be reduced by ascorbic acid. Inspired by this phenomenon, an electrochemical biosensor was constructed based on multiple signal amplification for the diagnosis of miRNAs. Firstly, p-Co-BDC/AuNPs enhanced the electrochemical oxidation of MB. Then, strand displacement amplification reaction can form lots of double helix structure DNA to embed more MB molecules. Finally, ascorbic acid in the electrolyte was utilized to reduce the oxidation of MB and improve the electrochemical signal of MB electro-oxidation. The linear detection range for the detection of miRNAs is 100 aM to 10 nM, and the limit of detection is 86 aM. Furthermore, the constructed biosensor also displayed satisfactory selectivity, good reproducibility, and excellent recovery in the detection of real samples. We are convinced that our proposed multiple signal amplification strategy will provide more promising methods for the diagnosis of cancer.

Ultrasensitive electrochemical molecularly imprinted sensor based on AuE/Ag-MOF@MC for determination of hemoglobin using response surface methodology

Considering the importance of determining the levels of hemoglobin (Hb) as a vital protein in red blood cells, in this work a highly sensitive electrochemical sensor was developed based on a gold electrode (AuE) modified with Ag metal-organic framework mesoporous carbon (Ag-MOF@MC) and molecularly imprinted polymers (MIPs). To that end, the MIP layer was formed on the Ag-MOF@MC by implanting Hb as the pattern molecule during the polymerization. The modified electrode was designed using electrochemical approaches including differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Using a response level experimental design method, the most important parameters affecting the reaction of the sensing system including pH, incubation time, and scanning rate were optimized. Following the same route, the Hb concentration, pH, temperature, and elution times were optimized to prepare the imprinted polymer layer on the Ag-MOF@MC surface. By exploiting DPV techniques based on the optimal parameters, the electrochemical response of the AuE/Ag-MOF@MC-MIPs for Hb determination was recorded in a wide linear dynamic range (LDR) of 0.2 pM to 1000 nM, with a limit of detection (LOD) of 0.09 pM. Moreover, the Ag-MOF@MC-MIP sensing system showed good stability, high selectivity, and acceptable reproducibility for Hb determination. The sensing system was successfully applied for Hb determination in real blood samples, and the results were compared with those of the standard methods for Hb determination. Acceptable recovery (99.0%) and RDS% (4.6%) confirmed the applicability and reliability of the designed Hb sensing system.

A Non-enzymatic Electrochemical Sensor for Glucose Detection Based on Ag@TiO2@ Metal-Organic Framework (ZIF-67) Nanocomposite

This work presents the preparation of an efficient and sensitive glucose sensor for the detection of glucose in an alkaline media. The glucose sensor is composed of a metal organic framework (MOF) composite comprising Ag@TiO₂ nanoparticles. The hybrid of Ag@TiO₂ encapsulated in ZIF-67 was synthesized by the solvothermal method and applied onto a glassy carbon electrode (GCE) for the non-enzymatic sensing of glucose. The porosity of ZIF-67 was favorable for the unhindered diffusion and entrapment of glucose and its cavities served as reaction vessels. The electrochemical behavior of Ag@TiO₂@ZIF-67 showed amplified results when compared with that of Ag@TiO₂ and ZIF-67. Cyclic tests toward the oxidation of glucose has demonstrated excellent stability of a MOF-based hybrid sensor. The sensor based on Ag@TiO₂@ZIF-67 showed high sensitivity of 0.788 μAμM⁻¹cm⁻² with a linear concentration range of 48 μM⁻¹ mM and a response time of 5 s with an excellent detection limit of 0.99 μM (S/N = 3).

Nonvolatile Electrical Bistability Behaviors Observed in Au/Ag Nanoparticle-Embedded MOFs and Switching Mechanisms

Electrically bistable devices play an important role in the next generation of information materials. Plasmonic noble metal nanoparticles (Au and Ag NPs) with diameters <6 nm were embedded into 3-D Cd-based metal-organic framework (MOF) matrixes via the photoreduction method to generate Au (Ag) NPs@MOF composites. Electrical bistability measurements on the sandwiched ITO/NPs@MOF/silver devices indicate that two switchable conductivity states with nonvolatile memory behaviors can be observed. The ITO/Au NP@2/Ag device with neutral matrix possesses the highest ON/OFF current ratio of 10⁴, which can be attributed to its higher electron tunneling efficiency because of the better dispersity of Au NPs in the MOF matrix. A mechanism regarding the electric-field-induced charge-transfer process assisted by conformational change in the active layer was proposed.

Metal-Organic Framework-Based Composite for Photocatalytic Detection of Prevalent Pollutant

Photocatalytic properties of 2,5-furandicarboxylic acid (FDCA), a model organic molecule used for biopolymer production, are reported for the first time. Further integration of FDCA into metal-organic framework (MOF) structures and subsequent silver-based photoactivation leads to the next generation of hybrids with controlled morphologies, capable of forming sensorial platforms for prevalent phenol contaminant detection. The mechanisms that allow photocatalytic functionality are driven by the charge carrier generation in the organic molecule (either in its alone or integrated form) and depend on sample's physical and chemical properties as confirmed by scanning and transmission electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy, and X-ray diffraction, respectively. Electrochemical analysis using cyclic voltammetry confirmed high sensitivity for p-nitrophenol (p-NP) detection as dictated by the selective electron migration at a user-controlled electrode interface. Considering the wide usage of p-NP and its increased discharge shown to lead to harmful effects on both the environment and biosystems, this new detection method is envisioned to allow effective control and regulation of such compound release, all under low-cost and environmentally friendly conditions.

Metal-Organic Frameworks in Green Analytical Chemistry

Metal-organic frameworks (MOFs) are porous hybrid materials composed of metal ions and organic linkers, characterized by their crystallinity and by the highest known surface areas. MOFs structures present accessible cages, tunnels and modifiable pores, together with adequate mechanical and thermal stability. Their outstanding properties have led to their recognition as revolutionary materials in recent years. Analytical chemistry has also benefited from the potential of MOF applications. MOFs succeed as sorbent materials in extraction and microextraction procedures, as sensors, and as stationary or pseudo-stationary phases in chromatographic systems. To date, around 100 different MOFs form part of those analytical applications. This review intends to give an overview on the use of MOFs in analytical chemistry in recent years (2017–2019) within the framework of green analytical chemistry requirements, with a particular emphasis on possible toxicity issues of neat MOFs and trends to ensure green approaches in their preparation.

Fabrication of Carboxymethylcellulose/Metal-Organic Framework Beads for Removal of Pb(II) from Aqueous Solution

The ability to remove toxic heavy metals, such as Pb(II), from the environment is an important objective from both human-health and ecological perspectives. Herein, we describe the fabrication of a novel carboxymethylcellulose-coated metal organic material (MOF-5⁻CMC) adsorbent that removed lead ions from aqueous solutions. The adsorption material was characterized by Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. We studied the functions of the contact time, pH, the original concentration of the Pb(II) solution, and adsorption temperature on adsorption capacity. MOF-5⁻CMC beads exhibit good adsorption performance; the maximum adsorption capacity obtained from the Langmuir isotherm-model is 322.58 mg/g, and the adsorption equilibrium was reached in 120 min at a concentration of 300 mg/L. The adsorption kinetics is well described by pseudo-second-order kinetics, and the adsorption equilibrium data are well fitted to the Langmuir isotherm model (R² = 0.988). Thermodynamics experiments indicate that the adsorption process is both spontaneous and endothermic. In addition, the adsorbent is reusable. We conclude that MOF-5⁻CMC is a good adsorbent that can be used to remove Pb(II) from aqueous solutions.

Preparation of Ag@zeolitic imidazolate framework-67 at room temperature for electrochemical sensing of hydrogen peroxide

In this work, a novel non-enzymatic hydrogen peroxide sensor, Ag@zeolitic imidazolate framework-67 (Ag@ZIF-67)/glassy carbon electrode (GCE), was fabricated by a simple method at room temperature. The morphology and structure of Ag@ZIF-67 were investigated by scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, powder X-ray diffraction, atomic absorption spectrophotometry, and N2 absorption isotherms, which indicated that core-shell Ag@ZIF-67 was successfully synthesized with a porous rhombic dodecahedron structure. Electrochemical investigations demonstrated that the Ag@ZIF-67/GCE had strong electrocatalytic activity towards hydrogen peroxide reduction with a low detection limit of 1.5 μM (S/N = 3), a fast response time of 3 s, and three different linear relationships in the ranges of 5.0 μM-275 μM, 775 μM-2775 μM, and 4775 μM-16 775 μM with sensitivities of 27 μA mM-1 cm-2, 13 μA mM-1 cm-2, and 5.3 μA mM-1 cm-2, respectively. Moreover, the fabricated sensor exhibited an excellent recovery rate in real sample analysis of medical hydrogen peroxide disinfectant. These results proved that Ag@ZIF-67/GCE is an effective electrochemical sensor for detecting hydrogen peroxide.

Monometallic and bimetallic Cu–Ag MOF/MCM-41 composites: structural characterization and catalytic activity

Monometallic and bimetallic MOF/MCM-41 composites (Cu, Ag and Cu–Ag) were synthesized via a solvothermal method. The synthesized composites were characterized by XRD, FTIR, SEM, EDX and BET surface area measurements. The acidity was determined through two techniques; potentiometric titration with n-butyl amine for determining the strength and the total number of acid sites and FTIR spectra of chemisorbed pyridine on the surface of MOFs for determining the type of acid sites (Brønsted and/or Lewis). All the prepared MOFs showed Lewis-acid sites and the higher acidity was observed for the bimetallic Cu–Ag MOF/MCM-41 composite. The catalytic activity was examined on the synthesis of 1-amidoalkyl-2-naphthol via the reaction of benzaldehyde, 2-naphthol and benzamide. The best yield (92.86%) was obtained in the least time (10 min) with a molar ratio 1.2 : 1.2 : 1.7 of benzaldehyde : β-naphthol : benzamide and 0.1 g bimetallic Cu–Ag MOF/MCM-41 composite under solvent-free conditions at 130 °C. Reuse of the catalysts showed that they could be used at least four times without any reduction in the catalytic activity.

Monometallic and bimetallic MOF/MCM-41 composites (Cu, Ag and Cu–Ag) were synthesized via a solvothermal method.