A Polyketone-based Anion Exchange Membrane for Electrochemical Applications: Synthesis and Characterization

Enhanced Antibacterial Activity of Vancomycin Loaded on Functionalized Polyketones

Today, polymeric drug delivery systems (DDS) appear as an interesting solution against bacterial resistance, having great advantages such as low toxicity, biocompatibility, and biodegradability. In this work, two polyketones (PK) have been post-functionalized with sodium taurinate (PKT) or potassium sulfanilate (PKSK) and employed as carriers for Vancomycin against bacterial infections. Modified PKs were easily prepared by the Paal-Knorr reaction and loaded with Vancomycin at a variable pH. All polymers were characterized by FT-IR, DSC, TGA, SEM, and elemental analysis. Antimicrobial activity was tested against Gram-positive Staphylococcus aureus ATCC 25923 and correlated to the different pHs used for its loading (between 2.3 and 8.8). In particular, the minimum inhibitory concentrations achieved with PKT and PKSK loaded with Vancomycin were similar, at 0.23 μg/mL and 0.24 μg/mL, respectively, i.e., six times lower than that with Vancomycin alone. The use of post-functionalized aliphatic polyketones has thus been demonstrated to be a promising way to obtain very efficient polymeric DDS.

Recent Advances in Synthesis of Non-Alternating Polyketone Generated by Copolymerization of Carbon Monoxide and Ethylene

The copolymers of carbon monoxide (CO) and ethylene, namely aliphatic polyketones (PKs), have attracted considerable attention due to their unique property and degradation. Based on the arrangement of the ethylene and carbonyl groups in the polymer chain, PKs can be divided into perfect alternating and non-perfect alternating copolymers. Perfect alternating PKs have been previously reviewed, we herein focus on recent advances in the synthesis of PKs without a perfect alternating structure including non-perfect alternating PKs and PE with in-chain ketones. The chain structure of PKs, catalytic copolymerization mechanism, and non-alternating polymerization catalysts including phosphine-sulfonate Pd, diphosphazane monoxide (PNPO) Pd/Ni, and phosphinophenolate Ni catalysts are comprehensively summarized. This review aims to enlighten the design of ethylene/CO non-alternating polymerization catalysts for the development of new polyketone materials.

Water Uptake in an Anion Exchange Membrane Based on Polyamine: A First-Principles Study

An atomistic level study of a single monomer of polyamine interacting with water molecules and hydroxide anions (OH^-) was carried out to investigate the role of the polyamine structure in the hydrated morphology of anion exchange membranes (AEMs) for alkaline fuel cells and its influence on ionic conductivity and chemical stability. DFT calculations were performed to find the ground state of the system, studying the interactions of the solvent species with three different regions of the polymer─the amine functional group, the backbone, and the carbonyl group. The hydrophilic/hydrophobic behavior of each segment was determined, with calculated binding energies and Bader charge analysis providing a more quantitative analysis of the interactions and activation and reaction energies computed to investigate the chemical degradation mechanism. The results show the tendency of both OH^- and water molecules to form water clusters in the proximity of the ionized amine group. As such, these regions constitute the preferential pathway for ionic conductivity. Besides, the essential role of the water content is pointed out, not only to enhance conductivity but also to reduce degradation in an alkaline environment. The present work provides a baseline to assess the impact of polymer chemistry on the ionic conductivity of the membrane and acts as the first step for the development of high-performance AEMs and for an improvement of the overall performance of the fuel cell.

What is Next in Anion-Exchange Membrane Water Electrolyzers? Bottlenecks, Benefits, and Future

As highlighted by the recent roadmaps from the European Union and the United States, water electrolysis is the most valuable high-intensity technology for producing green hydrogen. Currently, two commercial low-temperature water electrolyzer technologies exist: alkaline water electrolyzer (A-WE) and proton-exchange membrane water electrolyzer (PEM-WE). However, both have major drawbacks. A-WE shows low productivity and efficiency, while PEM-WE uses a significant amount of critical raw materials. Lately, the use of anion-exchange membrane water electrolyzers (AEM-WE) has been proposed to overcome the limitations of the current commercial systems. AEM-WE could become the cornerstone to achieve an intense, safe, and resilient green hydrogen production to fulfill the hydrogen targets to achieve the 2050 decarbonization goals. Here, the status of AEM-WE development is discussed, with a focus on the most critical aspects for research and highlighting the potential routes for overcoming the remaining issues. The Review closes with the future perspective on the AEM-WE research indicating the targets to be achieved.

Enhanced OH− Conductivity for Fuel Cells with Anion Exchange Membranes, Based on Modified Terpolymer Polyketone and Surface Functionalized Silica

Several modified terpolymer polyketones (MPK) with N-substituted pyrrole moieties in the main chain and quaternized amine in the side group were synthesized for use as anion exchange membranes for fuel cells. The moieties were carried by SiO2 nanoparticles through surface functionalization (Si–N), which were added to the membranes to enhance their overall properties. On increasing the amount of modified silica from 10% to 60% wt/of MPK, there was an increase in Si–N and a corresponding threefold increase in the hydroxide conductivity of the membrane. The MPK–SiN (60%) exhibited a superior ionic conductivity of 1.05 × 10−1 S.cm−1 at 120 °C, a high mechanical stability, with a tensile strength of 46 MPa at 80 °C. In strongly alkaline conditions (1 M KOH, 216 h at 80 °C), the membranes maintained about 70% of the conductivity measured in a usual environment. Fuel cell performance at 80 °C showed a peak power density of 133 mW·cm−2, indicating that using surface-functionalized SiO2 is a simple and effective way to enhance the overall performance of anion exchange membranes in fuel cell applications.

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

The low concentration of nickel in electroplating wastewater is difficult to treat to meet the discharge standard. In this study, a commercial cation exchange membrane was used to combine the electrodialysis on a titanium plate anode sintered ruthenium-iridium and the electrodeposition on a stainless steel cathode to reduce the nickel concentration to less 0.1 mg L^-1. The electrolytic properties of the electrodialysis combined with the electrodeposition were investigated at different cell voltages, electrolysis time, initial electrolyte pH, electrolyte flow rates and initial Ni²⁺ concentrations. The results indicated that the Ni²⁺ concentration in the anolyte and the catholyte could be reduced to 0.015 and 0.085 mg L^-1, respectively, with the initial Ni²⁺ concentration of 1.0 mg L^-1, which could meet the most strict Ni²⁺ discharge standard of 0.1 mg L^-1. The electrodeposition of Ni²⁺ on the cathode enhanced the migration of the Ni²⁺ in the electrolytes, which was beneficial to decrease the energy consumption. Therefore, the combination of electrodialysis and electrodeposition was promising to reduce the low concentration of Ni²⁺ in the electroplating wastewater.

Surface softening in palladium nanoparticles: effects of a capping agent on vibrational properties

The presence of a capping agent (CTAB) on Pd nanoparticles produces a strong static disorder in the surface region. This results in a surface softening, which contributes to an overall increase in the Debye-Waller coefficient measured by X-ray powder diffraction. Molecular dynamics and density functional theory simulations show that the adsorption-induced surface disorder is strong enough to overcome the effects of nanoparticle size and shape.

Direct modification of polyketone resin for anion exchange membrane of alkaline fuel cells

A kind of side-chain type anion exchange membranes (AEMs) with high ionic conductivity and good comprehensive stability was prepared via direct modification of commercial engineering plastic polyketone with diamines through Paal-Knorr reaction and quaternization reaction. It was found that the amount of diamine can effectively tune the microphase morphology and properties of the prepared quaternized functionalized-polyketone anion exchange membranes (QAFPK-AEMs). The tensile strength was increased from 18.6 MPa to 38.6 MPa, and the ion exchange capacity (IEC) was increased from 1.11 mmol/g to 2.71 mmol/g depending on the amount of added diamine. The QAFPK-1-6-AEM with the IEC of 1.43 mmol/g showed the highest hydroxide conductivity of 65 mS/cm at 25 °C and 96.8 mS/cm at 80 °C. The high ionic conductivity was achieved through the establishment of effective ionic channels, and it maintained 70% of the initial ionic conductivity after the 192 h treatment in 2 mol/L KOH (aq) at 80 °C. Moreover, a peak power density of 129 mW/cm² was achieved when the assembled single cell with QAFPK-1-6-AEM was operated at 50 °C. Thus, the prepared QAFPK-AEMs showed great potential applications for the anion exchange membrane fuel cells (AEMFCs).

Effect of the Polyketone Aromatic Pendent Groups on the Electrical Conductivity of the Derived MWCNTs-Based Nanocomposites

Electrically conductive plastics with a stable electric response within a wide temperature range are promising substitutes of conventional inorganic conductive materials. This study examines the preparation of thermoplastic polyketones (PK30) functionalized by the Paal⁻Knorr process with phenyl (PEA), thiophene (TMA), and pyrene (PMA) pendent groups with the aim of optimizing the non-covalent functionalization of multiwalled carbon nanotubes (MWCNTs) through π⁻π interactions. Among all the aromatic functionalities grafted to the PK30 backbone, the extended aromatic nuclei of PMA were found to be particularly effective in preparing well exfoliated and undamaged MWCNTs dispersions with a well-defined conductive percolative network above the 2 wt % of loading and in freshly prepared nanocomposites as well. The efficient and superior π⁻π interactions between PK30PMA and MWCNTs consistently supported the formation of nanocomposites with a highly stable electrical response after thermal solicitations such as temperature annealing at the softening point, IR radiation exposure, as well as several heating/cooling cycles from room temperature to 75 °C.