Electrochemical performance investigation of electrospun urchin-like V2O3-CNF composite nanostructure for vanadium redox flow battery

Laser-Ironing Induced Capping Layer on Co-ZIF-L Promoting In Situ Surface Modification to High-Spin Oxide-Carbon Hybrids on the "Real Catalyst" for High OER Activity and Stability

Enhancing electrocatalytic performance through structural and compositional engineering attracts considerable attention. However, most materials only function as pre-catalysts and convert into "real catalysts" during electrochemical reactions. Such transition involves dramatic structural and compositional changes and disrupts their designed properties. Herein, for the first time, a laser-ironing (LI) approach capable of in-situ forming a laser-ironing capping layer (LICL) on the Co-ZIF-L flakes is developed. During the oxygen evolution reaction (OER) process, the LICL sustains the leaf-like morphology and promotes the formation of OER-active Co3 O4 nanoclusters with the highest activity and stability. In contrast, the pristine and conventional heat-treated Co-ZIF-Ls both collapse and transform to less active CoOOH. The density functional theory (DFT) calculations pinpoint the importance of the high spin (HS) states of Co ions and the narrowed band gap in Co3 O4 nanoclusters. They enhance the OER activity by promoting spin-selected electron transport, effectively lowering the energy barrier and realizing a spontaneous O2 -releasing step that is the potential determining step (pds) in CoOOH. This study presents an innovative approach for modulating both structural and compositional evolutions of electrocatalysts during the reaction, sustaining stability with high performance during dynamic electrochemical reactions, and providing new pathways for facile and high-precision surface microstructure control.

Synthesis and applications of carbon nanofibers: a review

Carbon nanofibers (CNFs) have shown great potential in multiple applications. Their versatility is derived from the possibility of tuning their physical and chemical properties. CNFs can be synthesized using two main methods: the catalytic decomposition of carbon precursors or the electrospinning and carbonization of polymers. The most appropriate method relies on the desired characteristics of the CNFs. Some of their applications include the synthesis of catalysts and catalytic supports, as electrodes for fuel cell devices, in hydrogen storage systems, and in functional nanocomposites. In this review, recent advances in the synthesis and potential applications of CNFs are examined.

Electrospun Nanomaterials for Energy Applications: Recent Advances

Electrospinning is a simple, versatile, cost-effective, and scalable technique for the growth of highly porous nanofibers. These nanostructures, featured by high aspect ratio, may exhibit a large variety of different sizes, morphologies, composition, and physicochemical properties. By proper post-spinning heat treatment(s), self-standing fibrous mats can also be produced. Large surface area and high porosity make electrospun nanomaterials (both fibers and three-dimensional fiber networks) particularly suitable to numerous energy-related applications. Relevant results and recent advances achieved by their use in rechargeable lithium- and sodium-ion batteries, redox flow batteries, metal-air batteries, supercapacitors, reactors for water desalination via capacitive deionization and for hydrogen production by water splitting, as well as nanogenerators for energy harvesting, and textiles for energy saving will be presented and the future prospects for the large-scale application of electrospun nanomaterials will be discussed.

Lignin-Based Carbon Nanofibers as Electrodes for Vanadium Redox Couple Electrochemistry

Three different types of lignin (kraft, organosolv and phosphoric acid lignin) were characterized and tested as precursors of electrospun nanofibers. Polyethylene oxide (PEO) was added as a plasticizer and dimethyl formamide (DMF) employed as a solvent. It was found that the molecular weight of lignin was the key parameter to understand the differences of the mechanical stability of the resultant fiber mats. In the case of kraft lignin (KL), the influence of some changes in the synthetic process was also tested: applied voltage, pretreatment in air or not, and the addition of a small amount of Ketjen black. After pyrolysis in nitrogen flow, the obtained carbon nanofibers (CNFs) were characterized by different techniques to analyze their differences in morphology and surface chemistry. Vanadium electrochemistry in 3M sulfuric acid was used to evaluate the different CNFs. All fibers allowed electrochemical reactions, but we observed that the oxidation of V(II) to V(III) was very sensitive to the nature of the raw material. Materials prepared from kraft and phosphorus lignin showed the best performances. Nevertheless, when 1 wt.% of Ketjen black was added to KL during the electrospinning, the electrochemical performance of the sample was significantly improved and all targeted reactions for an all-vanadium redox flow battery were observed. Therefore, in this work, we demonstrated that CNFs obtained by the electrospinning of lignin can be employed as electrodes for vanadium electrochemistry, and their properties can be tuned to improve their electrochemical properties.

Modifying Perovskite Films with Polyvinylpyrrolidone for Ambient-Air-Stable Highly Bendable Solar Cells

One major drawback that prevents the large-scale practical implementation of perovskites is their susceptibility to performance degradation in humid environments. Here, we achieved uniform, stable perovskite films within a polyvinylpyrrolidone (PVP) polymer frame via mild solution processing in ambient air with over 60% relative humidity. In addition to facilitating film formation, the hydrophobic PVP served to protect the perovskite grains from atmospheric moisture. Use of PVP, coupled with optimization of the deposition parameters, provided for compact, smooth, pinhole-free perovskite films that when incorporated into a photovoltaic device exhibited highly reproducible efficiencies in the range of up to 17%. In the absence of encapsulation, the devices exhibited stable performance characteristics during exposure to humid ambient air for 600 h. Furthermore, on flexible substrates, the 8 wt % PVP-perovskite samples provided for device efficiencies of ca. 15%. The devices retained ca. 73% of their efficiency after bending 1000 times with a bending radius of 0.5 cm.

Enhanced stability of smoothly electrodeposited amorphous Fe2O3@electrospun carbon nanofibers as self-standing anodes for lithium ion batteries

Fe₂O₃ and carbon nanofiber (Fe₂O₃@CNFs) composite anodes for lithium ion batteries (LIBs) were fabricated by electrospinning and electrodeposition to provide a simple route for modulating the morphology of the anodes and their performance.

Design and synthesis of a free-standing carbon nano-fibrous web electrode with ultra large pores for high-performance vanadium flow batteries

A highly porously free-standing nano fibrous web electrode has been designed and fabricated for VFB through a novel horizontally-opposed blending electrospinning method in this study.