Sensitive warfarin sensor based on cobalt oxide nanoparticles electrodeposited at multi-walled carbon nanotubes modified glassy carbon electrode (CoxOyNPs/MWCNTs/GCE)

A novel and ultrasensitive electrochemical DNA biosensor for pralatrexate detection

An attempt was made to develop a new sensitive biosensor for pralatrexate, as an anticancer drug, based on its interaction with the guanine of fish sperm DNA anchored on a screen-printed electrode (SPE) modified with polypyrrole (PP)/octahedral Pd-doped Co₃O₄ composite (Oh-Pd-doped Co₃O₄ C). Electrochemical techniques like differential pulse voltammetry verified the mechanism of such an interaction on the dsDNA/PP/Oh-Pd-doped Co₃O₄ C/SPE surface. A reduction in the peak current of guanine oxidation elucidated the interaction in acetate buffer with pH = 4.8. The optimization of response was performed for the interaction method according to potential, accumulation time, reproducibility and drug content. The linear dynamic range was estimated at 1.0 nM to 150.0 μM as well as a limit of detection as low as 0.61 nM for the DNA and pralatrexate concentrations. The practical potential of the proposed sensor was verified by determining pralatrexate in its pharmaceutical matrices.

Bismuth Nanoclusters/Porous Carbon Composite: A Facile Ratiometric Electrochemical Sensing Platform for Pb2+ Detection with High Sensitivity and Selectivity

In this work, a ratiometric electrochemical sensor was constructed for the detection of Pb²⁺ based on a bismuth nanocluster-anchored porous activated biochar (BiNCs@AB) composite. BiNCs with loose structure and AB with abundant oxygen-containing functional groups are favorable for Pb²⁺ adsorption and preconcentration; meanwhile, porous AB provides more mass transfer pathways and increases electronic and ion diffusion coefficients, realizing high sensitivity for Pb²⁺ detection. At the same time, BiNCs were proposed as an inner reference for ratiometric electrochemical detection, which could greatly enhance the determination accuracy. Under optimized experimental conditions, the anodic peak current ratio between Pb²⁺ and BiNCs exhibited a good linear relationship with the concentration from 3.0 ng/L to 1.0 mg/L. The detection limit can be detected down to 1.0 ng/L. Furthermore, the proposed sensor demonstrated good reproducibility, stability, and interference resistance, as well as satisfactory recoveries for the detection of Pb²⁺ in real samples.

Carbon based nanomaterials for the detection of narrow therapeutic index pharmaceuticals

Precise detection of important pharmaceuticals with narrow therapeutic index (NTI) is very critical as there is a small window between their effective dose and the doses at which the adverse reactions are very likely to appear. Regarding the fact that various pharmacokinetics will be plausible while considering pharmacogenetic factors and also differences between generic and brand name drugs, accurate detection of NTI will be more important. Current routine analytical techniques suffer from many drawbacks while using novel biosensors can bring up many advantages including fast detection, accuracy, low cost with simple and repeatable measurements. Recently the well-known carbon Nano-allotropes including carbon nanotubes and graphenes have been widely used for development of different Nano-biosensors for a diverse list of analytes because of their great physiochemical features such as high tensile strength, ultra-light weight, unique electronic construction, high thermo-chemical stability, and an appropriate capacity for electron transfer. Because of these exceptional properties, scientists have developed an immense interest in these nanomaterials. In this case, there are important reports to show the effective Nano-carbon based biosensors in the detection of NTI drugs and the present review will critically summarize the available data in this field.

Dual-recognition molecularly imprinted aptasensor based on gold nanoparticles decorated carboxylated carbon nanotubes for highly selective and sensitive determination of histamine in different matrices

In this study, an electrochemical aptamer based sensor (aptasensor) was proposed for specific recognition of histamine (HIS). The electrochemical aptasensor based on fabrication of glassy carbon electrode (GCE) with molecular imprinted polymer (MIP) and DNA aptamers on gold nanoparticles (AuNPs) and carboxylated carbon nanotubes (cCNTs) (MIP-apta/AuNPs/cCNTs/GCE). The aptasensor exhibits high selectivity towards HIS detection as it has two recognition elements which are MIP cavities and aptamer interaction. Upon exposure of MIP-apt/AuNPs/cCNTs/GCE to HIS, the current of redox probe was decreased that depends on the template (HIS) concentration. The effects of aptamer concentration, incubation time, pH and AuNPs electro-deposition time were optimized. Differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques were used to analyze HIS in complicated matrices. Favorable performance of MIP-apt/AuNPs/cCNTs/GCE was achieved with linearity ranges of 0.46-35 nmol L^-1 and 0.35-35 nmol L^-1 with limits of detection (LODs, S/N = 3) of 0.15 nmol L^-1 and 0.11 nmol L^-1 using DPV and EIS, respectively. The fabricated aptasensor displayed high selectivity, desirable reproducibility and stability. The MIP-apt/AuNPs/cCNTs/GCE was used to detect HIS in human plasma and canned tuna samples with good recoveries % and RSDs %.

Synthesis and utilization of Co3O4 doped carbon nanofiber for fabrication of hemoglobin-based electrochemical sensor

In this paper cobalt oxide (Co₃O₄) nanoparticles were mixed with polyacrylonitrile to prepare Co₃O₄ doped carbon nanofiber (CNF) composite by electrospinning and carbonization, which was further used to modify on carbon ionic liquid electrode (CILE). Hemoglobin (Hb) was immobilized on Co₃O₄-CNF/CILE surface with Nafion acted as the protective film to fabricate an electrochemical biosensor (Nafion/Hb/Co₃O₄-CNF/CILE). Electrochemical behavior of Hb on the electrode was investigated with a pair of quasi-reversible redox peak appeared on cyclic voltammogram and electrochemical parameters were calculated. Moreover, this biosensor had good analytical capabilities for electrocatalytic reduction of different substrates including trichloroacetic acid, potassium bromate and sodium nitrite with wider detection range from 40.0 to 260.0 mmol L^-1, 0.1 to 48.0 mmol L^-1 and 1.0 to 12.0 mmol L^-1 by cyclic voltammetry, respectively. The proposed method showed excellent anti-interferences ability with good selectivity and was successful used for quantitative detection of real samples, which displayed the potential applications to develop into a new analytical device.

Organic-Inorganic Nanohybrid Electrochemical Sensors from Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles and In-Situ Wrapped with Poly(2-methacryloyloxyethyl ferrocenecarboxylate) for Detection of the Content of Food Additives

An electrochemical sensor for detection of the content of aspartame was developed by modifying a glassy carbon electrode (GCE) with multi-walled carbon nanotubes decorated with zinc oxide nanoparticles and in-situ wrapped with poly(2-methacryloyloxyethyl ferrocenecarboxylate) (MWCNTs@ZnO/PMAEFc). MWCNTs@ZnO/PMAEFc nanohybrids were prepared through reaction of zinc acetate dihydrate with LiOH·H2O, followed by reversible addition-fragmentation chain transfer polymerization of 2-methacryloyloxyethyl ferrocenecarboxylate, and were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Raman, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), scanning electron microscope (SEM), and transmission electron microscope (TEM) techniques. The electrochemical properties of the prepared nanohybrids with various composition ratios were examined by cyclic voltammetry (CV), and the trace additives in food and/or beverage was detected by using differential pulse voltammetry (DPV). The experimental results indicated that the prepared nanohybrids for fabrication of electrochemical modified electrodes possess active electroresponse, marked redox current, and good electrochemical reversibility, which could be mediated by changing the system formulations. The nanohybrid modified electrode sensors had a good peak current linear dependence on the analyte concentration with a wide detection range and a limit of detection as low as about 1.35 × 10-9 mol L-1, and the amount of aspartame was measured to be 35.36 and 40.20 µM in Coke zero, and Sprite zero, respectively. Therefore, the developed nanohybrids can potentially be used to fabricate novel electrochemical sensors for applications in the detection of beverage and food safety.

Scanning Techniques for Nanobioconjugates of Carbon Nanotubes

Nanobioconjugates using carbon nanotubes (CNTs) are attractive and promising hybrid materials. Various biological applications using the CNT nanobioconjugates, for example, drug delivery systems and nanobiosensors, have been proposed by many authors. Scanning techniques such as scanning electron microscopy (SEM) and scanning probe microscopy (SPM) have advantages to characterize the CNT nanobioconjugates under various conditions, for example, isolated conjugates, conjugates in thin films, and conjugates in living cells. In this review article, almost 300 papers are categorized based on types of CNT applications, and various scanning data are introduced to illuminate merits of scanning techniques.