Gravimetric and volumetric capacitive performance of polyindole/carbon black/MoS2 hybrid electrode material for supercapacitor applications

Removal of Anionic Methyl Orange Dye from Water by Poly[2-methyl-1H-indole] Derivatives: Investigation of Kinetics and Isotherms of Adsorption

The adsorption properties toward methyl orange (MO) were evaluated for poly[2-methyl-1H-indole] and its derivatives. The influence of pH, ionic strength of solution, composition, and amount of sorbent on the adsorption of MO dye was investigated; the kinetics of dye adsorption was studied. The adsorption isotherms were analyzed using different models of sorption equilibrium. The presence of chemical interaction between polyindoles and dye was proved by IR and UV spectroscopy methods. The sorption of MO with polymers is realized mainly due to the formation of electrostatic interactions between the sulfogroup of the dye and the imino group of the sorbent. Microphotographs demonstrate the change in the morphology of polyindoles after adsorption, which further confirms the structural changes in the polymers. It was found that the main factors affecting the sorption capacity of the studied materials are the position and nature of substituents in the polymers and the sorption conditions. For example, polyindoles containing a methoxy group in their structure (o-OMePIn and m-OMePIn) have the best sorption activity. These polymers are effective in adsorbing dyes, which means that they can be used in wastewater treatment.

Fabrication of Multi-Layered Paper-Based Supercapacitor Anode by Growing Cu(OH)2 Nanorods on Oxygen Functional Groups-Rich Sponge-Like Carbon Fibers

This work addresses the challenges in developing carbon fiber paper-based supercapacitors (SCs) with high energy density by focusing on the limited capacity of carbon fiber. To overcome this limitation, a sponge-like porous carbon fiber paper enriched with oxygen functional groups (OFGs) is prepared, and Cu(OH)2 nanorods are grown on its surface to construct the SC anode. This design results in a multi-layered carbon fiber paper-based electrode with a specific structure and enhanced capacitance. The Cu(OH)2 @PCFP anode exhibits an areal capacitance of 547.83 mF cm-2 at a current density of 1 mA cm-2 and demonstrates excellent capacitance retention of 99.8% after 10 000 cycles. Theoretical calculations further confirm that the Cu(OH)2 /OFGs-graphite heterostructure exhibits higher conductivity, facilitating faster charge transfer. A solid-state SC is successfully assembled using Ketjen Black@PCFP as the cathode and KOH/PVA as the gel electrolyte. The resulting device exhibits an energy density of 0.21 Wh cm-2 at 1.50 mW cm-2 , surpassing the performance of reported Cu(OH)2 SCs. This approach, combining materials design with an understanding of underlying mechanisms, not only expands the range of electrode materials but also provides valuable insights for the development of high-capacity energy storage devices.

Ameliorated optical, luminescent and thermo-chemical features of polymer derived PPy-SnO2 nanocomposite as efficient emissive layer material (EML)

PPy-SnO2 (PS) nanocomposite was synthesized with varying doses of SnO2 through in-situ oxidative polymerization technique. Morphological study was performed through FESEM analysis. Particle size of the 15% PS nanocomposite was estimated in the 13-35 nm range by XRD analysis. Elemental presence and its deconvoluted states in the 15% PS nanocomposite were confirmed by XPS analysis. Optical band gap for optimized 15% PS was calculated ∼1.83 eV. PL intensity increases with increase in the concentration of SnO2. Its value was found highest for 15% PS laid in the light blue region (close to white light). CIE color coordinate study of the nanocomposites elucidated that optimized 15% PS could be used as efficient emissive layer material for WLED application. A comparative TGA study of the PPy and 15% PS illustrated that optimized 15% PS nanocomposite proved to have better thermal stability.

Polyindole Embedded Nickel/Zinc Oxide Nanocomposites for High-Performance Energy Storage Applications

Conducting polymers integrated with metal oxides create opportunities for hybrid capacitive electrodes. In this work, we report a one-pot oxidative polymerization for the synthesis of integrated conductive polyindole/nickel oxide (PIn/NiO), polyindole/zinc oxide (PIn/ZnO), and polyindole/nickel oxide/zinc oxide (PNZ). The polymers were analyzed thoroughly for their composition and physical as well as chemical properties by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and thermogravimetric analysis (TGA). The PIn and its composites were processed into electrodes, and their use in symmetrical supercapacitors in two- and three-electrode setups was evaluated by cyclic voltammetry (CV), galvanostatic discharge (GCD), and electrochemical impedance spectroscopy (EIS). The best electrochemical charge storage capability was found for the ternary PNZ composite. The high performance directly correlates with its uniformly shaped nanofibrous structure and high crystallinity. For instance, the symmetrical supercapacitor fabricated with PNZ hybrid electrodes shows a high specific capacitance of 310.9 F g^-1 at 0.5 A g^-1 with an energy density of 42.1 Wh kg^-1, a power density of 13.2 kW kg^-1, and a good cycling stability of 78.5% after 5000 cycles. This report presents new electrode materials for advanced supercapacitor technology based on these results.

Recent progress in 2D hybrid heterostructures from transition metal dichalcogenides and organic layers: properties and applications in energy and optoelectronics fields

Atomically thin transition metal dichalcogenides (TMDs) present extraordinary optoelectronic, electrochemical, and mechanical properties that have not been accessible in bulk semiconducting materials. Recently, a new research field, 2D hybrid heteromaterials, has emerged upon integrating TMDs with molecular systems, including organic molecules, polymers, metal-organic frameworks, and carbonaceous materials, that can tailor the TMD properties and exploit synergetic effects. TMD-based hybrid heterostructures can meet the demands of future optoelectronics, including supporting flexible, transparent, and ultrathin devices, and energy-based applications, offering high energy and power densities with long cycle lives. To realize such applications, it is necessary to understand the interactions between the hybrid components and to develop strategies for exploiting the distinct benefits of each component. Here, we provide an overview of the current understanding of the new phenomena and mechanisms involved in TMD/organic hybrids and potential applications harnessing such valuable materials in an insightful way. We highlight recent discoveries relating to multicomponent hybrid materials. Finally, we conclude this review by discussing challenges related to hybrid heteromaterials and presenting future directions and opportunities in this research field.

Preparation and Characterization of a Novel Activated Carbon@Polyindole Composite for the Effective Removal of Ionic Dye from Water

The present study is aimed at the synthesis and exploring the efficiency of a novel activated carbon incorporated polyindole (AC@PIN) composite for adsorptive removal of Malachite Green (MG) dye from aqueous solution. An AC@PIN hybrid material was prepared by in situ chemical oxidative polymerization. The physico-chemical characteristics of the AC@PIN composite were assessed using Fourier-transform infrared spectrometer, X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, ultraviolet visible spectroscopy, and determination of point of zero charge (pH_PZC). A series of adsorption studies was conducted to evaluate the influence of operational parameters such as pH, contact time, initial dye concentration, AC@PIN dosage, and temperature on dye adsorption behavior of developed composite. A maximum dye removal percentage (97.3%) was achieved at the pH = 10, AC@PIN dosage = 6.0 mg, initial dye concentration 150 mg L⁻¹, and temperature = 20 °C. The kinetic studies demonstrated that the adsorption of MG on AC@PIN followed pseudo-second-order model (R² ≥ 0.99). Meanwhile, Langmuir isotherm model was founded to be the best isotherm model to describe the adsorption process. Finally, the recyclability test revealed that the composite exhibits good recycle efficiency and is stable after 5 cycles. The obtained results suggest that AC@PIN composite could be a potential candidate for the removal of MG from wastewater.

Ternary 3D reduced graphene oxide/Ni0.5Zn0.5Fe2O4/polyindole nanocomposite for supercapacitor electrode application

A facile two-step strategy has been reported for the preparation of a ternary 3D reduced graphene oxide/Ni_0.5Zn_0.5Fe₂O₄/polyindole nanocomposite (GNP) and this composite is applied as an electrode material for supercapacitor applications. Remarkably, Ni_0.5Zn_0.5Fe₂O₄ nanoparticles (NZF) decorated on reduced graphene oxide (GN2) are achieved by a facile hydrothermal method followed by coating with polyindole (PIN) through an in situ emulsion polymerization process. The structure, porosity, morphology, and thermal stability of the resulting ternary GNP hybrid material were characterized via X-ray diffraction (XRD), Raman spectroscopy, Brunauer–Emmett–Teller (BET) surface area measurements, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). This combination of hybrid material has a favorable mesoporous structure that enables high exposure of active sites for fast electron transport for supercapacitor applications. We demonstrate here that the ternary GNP hybrid electrode material is capable of delivering a favorable specific capacitance of ∼320 F g⁻¹ at 0.3 A g⁻¹ within the potential range from −0.1 to 1 V, with desirable rate stability and excellent cycling stability in the three-electrode system. Furthermore, an asymmetric supercapacitor (ASC) of a two-electrode configuration was fabricated using 3D RGO and GNP as the negative and positive electrodes, respectively. Such a device manifests a favourable C_sp of 48.9 F g⁻¹ at 0.5 A g⁻¹ and retains stability of 84% even after 2000 cycles. This ASC device exhibits a significant energy density of 16.38 W h kg⁻¹ at a power density of 1784 W kg⁻¹. The synergistic effects of pseudo and double layer capacitive contributions from PIN and GN2 make this ternary GNP hybrid electrode material of great promise in supercapacitor applications.

A facile two-step strategy has been reported for the preparation of a ternary 3D reduced graphene oxide/Ni_0.5Zn_0.5Fe₂O₄/polyindole nanocomposite (GNP) and this composite is applied as an electrode material for supercapacitor applications.

Physical, Chemical, and Electrochemical Properties of Redox-Responsive Polybenzopyrrole as Electrode Material for Faradaic Energy Storage

Polybenzopyrrole (Pbp) is an emerging candidate for electrochemical energy conversion and storage. There is a need to develop synthesis strategies for this class of polymers that can help improve its overall properties and make it as suitable for energy storage applications as other well-studied polymers in this substance class, such as polyaniline and polypyrrole. In this study, by synthesizing Pbp in surfactant-supported acidic medium, we were able to show that the physicochemical and electrochemical properties of Pbp-based electrodes are strongly influenced by the respective polymerization conditions. Through appropriate optimization of various reaction parameters, a significant enhancement of the thermal stability (up to 549.9 °C) and the electrochemical properties could be achieved. A maximum specific capacitance of 166.0 ± 2.0 F g⁻¹ with an excellent cycle stability of 87% after 5000 cycles at a current density of 1 A g⁻¹ was achieved. In addition, a particularly high-power density of 2.75 kW kg⁻¹ was obtained for this polybenzopyrrole, having a gravimetric energy density of 17 Wh kg⁻¹. The results show that polybenzopyrroles are suitable candidates to compete with other conducting polymers as electrode materials for next-generation Faradaic supercapacitors. In addition, the results of the current study can also be easily applied to other systems and used for adaptations or new syntheses of advanced hybrid/composite Pbp-based electrode materials.

Recent Advances in Graphene and Conductive Polymer Composites for Supercapacitor Electrodes: A Review

Supercapacitors (SCs) have generated a great deal of interest regarding their prospects for application in energy storage due to their advantages such as long life cycles and high-power density. Graphene is an excellent electrode material for SCs due to its high electric conductivity and highly specific surface area. Conductive polymers (CPs) could potentially become the next-generation SC electrodes because of their low cost, facile synthesis methods, and high pseudocapacitance. Graphene/CP composites show conspicuous electrochemical performance when used as electrode materials for SCs. In this article, we present and summarize the synthesis and electrochemical performance of graphene/CP composites for SCs. Additionally, the method for synthesizing electrode materials for better electrochemical performance is discussed.

One-Pot Synthesis of Polyoxometalate Decorated Polyindole for Energy Storage Supercapacitors

The demand for energy storage supercapacitor devices has increased interest in completing all innovative technologies and renewable energy requirements. Here, we report a simple method of two polyoxomolybdate (H₄[PVMo₁₁O₄₀] and H₅[PV₂Mo₁₀O₄₀]) doped polyindole (PIn) composites for electrochemical supercapacitors. The interactions between polyoxomolybdates and PIn were measured by Fourier transform infrared spectroscopy (FTIR), and powder XRD, and stability was measured by thermogravimetry. The field emission scanning microscopy (FESEM) was employed to investigate the morphology of the materials. The electrochemical measurements show that the PIn/PV₂Mo₁₀ electrode exhibits a higher capacitance of 198.09 F/g with an energy density of 10.19 Wh/kg and a power density of 198.54 W/kg at 0.2 A/g current density than the PIn/PVMo₁₁ electrode. Both electrodes show a pseudocapacitance behavior due to the doping of redox-active polyoxomolybdates on the PIn surface and enhance the electrochemical properties. The electrodes' capacitive nature was measured by electrochemical impedance spectroscopy (EIS), which shows that the PIn/PVMo₁₁ electrode has a resistive nature within the electrode-electrode interface. Moreover, the PIn/PV₂Mo₁₀ electrode offers remarkable cycle stability, retaining ∼84% of its capacitance after 10,000 cycles (∼83% for the PIn/PVMo₁₁ electrode). The higher specific capacitance, faster charge/discharge rates, and higher cycle stability make them promising electrodes in supercapacitors.

Advanced materials and technologies for supercapacitors used in energy conversion and storage: a review

Supercapacitors are increasingly used for energy conversion and storage systems in sustainable nanotechnologies. Graphite is a conventional electrode utilized in Li-ion-based batteries, yet its specific capacitance of 372 mA h g−1 is not adequate for supercapacitor applications. Interest in supercapacitors is due to their high-energy capacity, storage for a shorter period and longer lifetime. This review compares the following materials used to fabricate supercapacitors: spinel ferrites, e.g., MFe2O4, MMoO4 and MCo2O4 where M denotes a transition metal ion; perovskite oxides; transition metals sulfides; carbon materials; and conducting polymers. The application window of perovskite can be controlled by cations in sublattice sites. Cations increase the specific capacitance because cations possess large orbital valence electrons which grow the oxygen vacancies. Electrodes made of transition metal sulfides, e.g., ZnCo2S4, display a high specific capacitance of 1269 F g−1, which is four times higher than those of transition metals oxides, e.g., Zn–Co ferrite, of 296 F g−1. This is explained by the low charge-transfer resistance and the high ion diffusion rate of transition metals sulfides. Composites made of magnetic oxides or transition metal sulfides with conducting polymers or carbon materials have the highest capacitance activity and cyclic stability. This is attributed to oxygen and sulfur active sites which foster electrolyte penetration during cycling, and, in turn, create new active sites.

Extraordinary Thickness-Independent Electrochemical Energy Storage Enabled by Cross-Linked Microporous Carbon Nanosheets

Two-dimensional carbon-based nanomaterials have demonstrated great promise as electrode materials for electrochemical energy storage. However, there is a trade-off relationship between energy storage and rate capability for carbon-based energy storage devices because of the incrementing ion diffusion limitations, especially for thick electrodes with high mass loading. Herein, we report the cross-linked microporous carbon nanosheets enabling high-energy and high-rate supercapacitors. The as-fabricated microporous carbon nanosheets exhibit an extraordinary thickness-independent electrochemical performance. With the thickness of 15 μm, the as-fabricated carbon nanosheet electrode possesses areal/volumetric/gravimetric capacitance of 895 mF cm^-2/596 F cm^-3/358 F g^-1. Even at a high electrode thickness of 125 μm, the as-fabricated thick electrode presents an ultrahigh areal/volumetric/gravimetric capacitance of 4102 mF cm^-2/328 F cm^-3/328 F g^-1. Furthermore, the as-assembled symmetric supercapacitor delivers an outstanding energy density of 19.2 W h kg^-1 at a power density of 135 W kg^-1 and ultralong cycling stability (capacitance retention of 95% after 180 000 charge/discharge cycles) in an alkaline electrolyte. This work not only provides a facile method for low-cost preparation of carbon nanostructures and high-value utilization of biomass wastes but also offers new insights into rational design and fabrication of advanced electrode materials for high-performance electrochemical energy storage.

Synthesis of Double-Layer Nitrogen-Doped Microporous Hollow Carbon@MoS2/MoO2 Nanospheres for Supercapacitors

In this work, a double-layer nitrogen-doped microporous hollow carbon@MoS₂/MoO₂ nanosphere (NCs@MoS₂/MoO₂) is prepared via a facile method utilizing Mo-mediated in situ growth on polyaniline-coated polystyrene spheres and carbonization process. Because of its unique structure, the as-obtained NCs@MoS₂/MoO₂ exhibits a high specific capacitance (569 F g^-1 at 1 A g^-1) and excellent rate performance (54.8% capacitance retention) from 1 A g^-1 (569 F g^-1) to 20 A g^-1 (312 F g^-1) when directly used as a supercapacitor electrode. In a two-electrode system, it exhibits 81% capacitance retention and 91.4% Coulombic efficiency even after 5000 cycles at 5 A g^-1. Therefore, the prepared NCs@MoS₂/MoO₂ shows to be an outstanding material for supercapacitor electrodes.

Rare earth metal oxide (RE2O3; RE = Nd, Gd, and Yb) incorporated polyindole composites: gravimetric and volumetric capacitive performance for supercapacitor applications

The modified morphology and the extra pseudocapacitive contribution from RE₂O₃ particles lead to enhanced capacitive performance of polyindole.