Electrocatalytic oxidation of urea in alkaline solution using nickel/nickel oxide nanoparticles derived from nickel-organic framework

CoMnO2-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO₂-coated and Fe₂O₃-coated carbon fibers were used as the cathode and the anode materials, respectively. Herein, the nanostructured CoMnO₂ were directly deposited onto carbon fibers by a chemical oxidation route without high temperature treatment in presence of ammonium persulfate (APS) as an oxidizing agent. FE-SEM analysis confirmed that the CoMnO₂-coated carbon fiber electrode exhibited the porous hierarchical interconnected nanosheet structures, depending on the added amount of APS, and Fe₂O₃-coated carbon fiber electrode showed a uniform distribution of porous Fe₂O₃ nanorods over the surface of carbon fibers. The electrochemical properties of the CoMnO₂-coated carbon fiber with the concentration of 6 mmol APS presented the enhanced electrochemical activity, probably due to its porous morphologies and good conductivity. Further, to reduce the interfacial contact resistance as well as improve the adhesion between transition metal nanostructures and carbon fibers, the carbon fibers were pre-coated with the Ni layer as a seed layer using an electrochemical deposition method. The fabricated ASC device delivered a specific capacitance of 221 F g^-1 at 0.7 A g^-1 and good rate capability of 34.8% at 4.9 A g^-1. Moreover, the wire-type device displayed the superior energy density of 60.2 Wh kg^-1 at a power density of 490 W kg^-1 and excellent capacitance retention of 95% up to 3000 charge/discharge cycles.

Designing Advanced Catalysts for Energy Conversion Based on Urea Oxidation Reaction

Urea oxidation reaction (UOR) is the underlying reaction that determines the performance of modern urea-based energy conversion technologies. These technologies include electrocatalytic and photoelectrochemical urea splitting for hydrogen production and direct urea fuel cells as power engines. They have demonstrated great potentials as alternatives to current water splitting and hydrogen fuel cell systems with more favorable operating conditions and cost effectiveness. At the moment, UOR performance is mainly limited by the 6-electron transfer process. In this case, various material design and synthesis strategies have recently been reported to produce highly efficient UOR catalysts. The performance of these advanced catalysts is optimized by the modification of their structural and chemical properties, including porosity development, heterostructure construction, defect engineering, surface functionalization, and electronic structure modulation. Considering the rich progress in this field, the recent advances in the design and synthesis of UOR catalysts for urea electrolysis, photoelectrochemical urea splitting, and direct urea fuel cells are reviewed here. Particular attention is paid to those design concepts, which specifically target the characteristics of urea molecules. Moreover, challenges and prospects for the future development of urea-based energy conversion technologies and corresponding catalysts are also discussed.

The Synthesis of N-(Pyridin-2-yl)-Benzamides from Aminopyridine and Trans-Beta-Nitrostyrene by Fe2Ni-BDC Bimetallic Metal–Organic Frameworks

A bimetallic metal–organic framework material, which was generated by bridging iron (III) cations and nickel (II) cations with 1,4-Benzenedicarboxylic anions (Fe2Ni-BDC), was synthesized by a solvothermal approach using nickel (II) nitrate hexahydrate and iron (III) chloride hexahydrate as the mixed metal source and 1,4-Benzenedicarboxylic acid (H2BDC) as the organic ligand source. The structure of samples was determined by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, and nitrogen physisorption measurements. The catalytic activity and recyclability of the Fe2Ni-BDC catalyst for the Michael addition amidation reaction of 2-aminopyridine and nitroolefins were estimated. The results illustrated that the Fe2Ni-BDC catalyst demonstrated good efficiency in the reaction under optimal conditions. Based on these results, a reaction mechanism was proposed. When the molar ratio of 2-aminopyridine and trans-β-nitrostyrene was 1:1, and the solvent was dichloromethane, the isolated yield of pyridyl benzamide reached 82%; at 80 °C over 24 h. The catalyst can be reused without a substantial reduction in catalytic activity with 77% yield after six times of reuse.