Inhibitive effect of Pt on Pd-hydride formation of Pd@Pt core-shell electrocatalysts: An in situ EXAFS and XRD study

Active and durable R2MnRuO7 pyrochlores with low Ru content for acidic oxygen evolution

The production of green hydrogen in water electrolyzers is limited by the oxygen evolution reaction (OER). State-of-the-art electrocatalysts are based on Ir. Ru electrocatalysts are a suitable alternative provided their performance is improved. Here we show that low-Ru-content pyrochlores (R₂MnRuO₇, R = Y, Tb and Dy) display high activity and durability for the OER in acidic media. Y₂MnRuO₇ is the most stable catalyst, displaying 1.5 V at 10 mA cm^-2 for 40 h, or 5000 cycles up to 1.7 V. Computational and experimental results show that the high performance is owed to Ru sites embedded in RuMnO_x surface layers. A water electrolyser with Y₂MnRuO₇ (with only 0.2 mg_Ru cm^-2) reaches 1 A cm^-2 at 1.75 V, remaining stable at 200 mA cm^-2 for more than 24 h. These results encourage further investigation on Ru catalysts in which a partial replacement of Ru by inexpensive cations can enhance the OER performance.

Insight into the Activity and Selectivity of Nanostructured Copper Titanates during Electrochemical Conversion of CO2 at Neutral pH via In Situ X-ray Absorption Spectroscopy

The electrochemical conversion of carbon dioxide (CO₂) to useful chemical fuels is a promising route toward the achievement of carbon neutral and carbon negative energy technologies. Copper (Cu)- and Cu oxide-derived surfaces are known to electrochemically convert CO₂ to high-value and energy-dense products. However, the nature and stability of oxidized Cu species under reaction conditions are the subject of much debate in the literature. Herein, we present the synthesis and characterization of copper-titanate nanocatalysts, with discrete Cu-O coordination environments, for the electrochemical CO₂ reduction reaction (CO₂RR). We employ real-time in situ X-ray absorption spectroscopy (XAS) to monitor Cu species under neutral-pH CO₂RR conditions. Combination of voltammetry and on-line electrochemical mass spectrometry with XAS results demonstrates that the titanate motif promotes the retention of oxidized Cu species under reducing conditions for extended periods, without itself possessing any CO₂RR activity. Additionally, we demonstrate that the specific nature of the Cu-O environment and the size of the catalyst dictate the long-term stability of the oxidized Cu species and, subsequently, the product selectivity.

In Situ X-Ray Techniques for Electrochemical Interfaces

This article reviews progress in the study of materials using X-ray-based techniques from an electrochemistry perspective. We focus on in situ/in operando surface X-ray scattering, X-ray absorption spectroscopy, and the combination of both methods. The background of these techniques together with key concepts is introduced. Key examples of in situ and in operando investigation of liquid-solid and liquid-liquid interfaces are presented. X-ray scattering and spectroscopy have helped to develop an understanding of the underlying atomic and molecular processes associated with electrocatalysis, electrodeposition, and battery materials. We highlight recent developments, including resonant surface diffraction and time-resolved studies.

A novel fuel cell design foroperandoenergy-dispersive x-ray absorption measurements

A polymer electrolyte fuel cell has been designed to allowoperandox-ray absorption spectroscopy (XAS) measurements of catalysts. The cell has been developed to operate under standard fuel cell conditions, with elevated temperatures and humidification of the gas-phase reactants, both of which greatly impact the catalyst utilisation. X-ray windows in the endplates of the cell facilitate collection of XAS spectra during fuel cell operation while maintaining good compression in the area of measurement. Results of polarisation curves and cyclic voltammograms showed that theoperandocell performs well as a fuel cell, while also providing XAS data of suitable quality for robust XANES analysis. The cell has produced comparable XAS results when performing a cyclic voltammogram to an establishedin situcell when measuring the Pt LIII edge. Similar trends of Pt oxidation, and reduction of the formed Pt oxide, have been presented with a time resolution of 5 s for each spectrum, paving the way for time-resolved spectral measurements of fuel cell catalysts in a fully-operating fuel cell.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

Amorphous/low-crystalline core/shell-type nanoparticles as highly efficient and self-stabilizing catalysts for alkaline hydrogen evolution

Amorphous/low-crystalline core/shell-type nanoparticles (Pd-P/Pt-Ni NPs) were prepared via a facile seed-mediated method. After acid treatment, the NPs exhibited self-improved catalysis for hydrogen evolution during electrolysis in an alkaline medium.

In Situ Study of Graphene Oxide Quantum Dot-MoSx Nanohybrids as Hydrogen Evolution Catalysts

Graphene quantum dots (GOQDs)-MoSx nanohybrids with different MoSx stoichiometries (x = 2 and 3) were prepared in order to investigate their chemical stability under hydrogen evolution reaction (HER) conditions. Combined photoemission/electrochemical (XPS/EC) measurements and operando X-ray absorption spectroscopy (XAS) were employed to determine the chemical changes induced on the MoSx-based materials as a function of the applied potential. This in situ characterization indicates that both MoS2 and MoS3 materials are stable under operating conditions, although sulfur terminal sites in the MoS3 nanoparticles are converted from S-dimer (S22−) to S-monomer (S2−), which constitute the first sites where the hydrogen atoms are adsorbed for their subsequent evolution. In order to complete the characterization of the GOQDs-MoSx nanohybrids, the composition and particle size were determined by X-ray photoemission spectroscopy (XPS), X-ray diffraction (XRD) and Raman spectroscopy; whereas the HER activity was studied by conventional electrochemical techniques.

Tuning the activity and selectivity of electroreduction of CO2 to synthesis gas using bimetallic catalysts

The electrochemical carbon dioxide reduction reaction to syngas with controlled CO/H2 ratios has been studied on Pd-based bimetallic hydrides using a combination of in situ characterization and density functional theory calculations. When compared with pure Pd hydride, the bimetallic Pd hydride formation occurs at more negative potentials for Pd-Ag, Pd-Cu, and Pd-Ni. Theoretical calculations show that the choice of the second metal has a more significant effect on the adsorption strength of *H than *HOCO, with the free energies between these two key intermediates (i.e., ΔG(*H)-ΔG(*HOCO)) correlating well with the carbon dioxide reduction reaction activity and selectivity observed in the experiments, and thus can be used as a descriptor to search for other bimetallic catalysts. The results also demonstrate the possibility of alloying Pd with non-precious transition metals to promote the electrochemical conversion of CO2 to syngas.