Porous Co3O4/CoS2 nanosheet-assembled hierarchical microspheres as superior electrocatalyst towards oxygen evolution reaction

Electrochemical sensor featuring PdFeCo1-xONPs on carbon paper for the sensitive determination of indole-3-lactic acid levels in serum samples

A highly sensitive and selective electrochemical sensing platform with self-assembled porous 3-D trimetallic (Pd, Fe, and Co) hybrid anchored on a cost-effective and high-conducting carbon paper (CP) synthesized via a facile and cost-effective hydrothermal impregnation and thermal reduction technique was developed for determining indole-3-lactic acid (ILA) levels in buffer and serum samples. Before the analytical phase, the composite (PdFeCo1-xONPs@CP electrode) was thoroughly characterized, and different methods were used to investigate the electrochemical properties. The combination of tri-metallics with CP-fibers improved sensing capacities in the linear range of 0.05-30 μM, with sensitivity and limits of detection of and 0.165 ± 0.013 μA/μM and 7.8 ± 0. 2 nM, respectively, towards ILA determination. Furthermore, the developed sensing platform was utilized for the analyses of ILA in sigma, human normal, and alcohol use disorder patients' serum samples. Liquid chromatography in tandem with mass spectrometry was equally used to quantify ILA levels in the serum samples and the results of both methods were compared.

Interfacial Engineering of MoS2@CoS2 Heterostructure Electrocatalysts for Effective pH-Universal Hydrogen Evolution Reaction

The practical utilization of the hydrogen evolution reaction (HER) necessitates the creation of electrocatalysts that are both efficient and abundant in earth elements, capable of operating effectively within a wide pH range. However, this objective continues to present itself as an arduous obstacle. In this research, we propose the incorporation of sulfur vacancies in a novel heterojunction formed by MoS2@CoS2, designed to exhibit remarkable catalytic performances. This efficacy is attributed to the advantageous combination of the low work function and space charge zone at the interface between MoS2 and CoS2 in the heterojunction. The MoS2@CoS2 heterojunction manifests outstanding hydrogen evolution activity over an extensive pH range. Remarkably, achieving a current density of 10 mA cm-2 in aqueous solutions 1.0 M KOH, 0.5 M H2SO4, and 1.0 M phosphate-buffered saline (PBS), respectively, requires only an overpotential of 48, 62, and 164 mV. The Tafel slopes for each case are 43, 32, and 62 mV dec-1, respectively. In this study, the synergistic effect of MoS2 and CoS2 is conducive to electron transfer, making the MoS2@CoS2 heterojunction show excellent electrocatalytic performance. The synergistic effects arising from the heterojunction and sulfur vacancy not only contribute to the observed catalytic prowess but also provide a valuable model and reference for the exploration of other efficient electrocatalysts. This research marks a significant stride toward overcoming the challenges associated with developing electrocatalysts for practical hydrogen evolution applications.

Hierarchical 3D porous trimetallic palladium-iron and cobalt on nickel foam as electrocatalyst for large current density oxygen evolution reaction in alkaline seawater

Electrolysis in seawater is a low-cost but difficult method of producing hydrogen. Herein, self-assembled hierarchical three-dimensional (3D) porous trimetallic palladium-iron and cobalt oxide anchored on a cheap and high surface area nickel foam (NF) (PdFeCo3-xO4/NF) were synthesized using a simple and low-cost impregnation-hydrothermal and thermal reduction strategy. The as-fabricated PdFeCo3-xO4/NF electrode showed both superhydrophilic and superaerophobic properties, which favored the fat removal of oxygen bubbles from the electrode surface owing to the close interaction between the electrode and electrolyte. Furthermore, the significant synergistic effect of trimetallics and the NF-matrix resulted in substantially enhanced oxygen evolution reaction (OER) intrinsic activity. The self-assembled PdFeCo3-xO4/NF catalyst exhibited critical low overpotentials of 300 and 340 mV to achieve an extremely large current density of 100 mA cm-2 in 1 M KOH solution and 1 M KOH seawater. Cell voltages as low as 1.44 and 1.51 V were required to drive 10 mA cm-2 in alkaline solution and seawater electrolytes for the full cell overall water splitting performance. This work suggests a promising strategy for developing next-generation electrocatalysts appropriate for natural seawater with cost-effective.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Revealing the intrinsic peroxidase-like catalytic mechanism of O-doped CoS2 nanoparticles

CoS2 nanoparticles (NPs) have shown promise as potential peroxidase (POD)-like catalysts, but the catalytic molecular mechanisms are largely unknown. Moreover, no study has adequately explored the influence of O-doping induced by the inevitable oxidation of CoS2 on their POD-like activity. Here, O-doped CoS2 NPs were prepared by a one-step method, and their intrinsic POD-like catalytic mechanism was investigated with a combined experimental and theoretical approach. The hydroxyl radical (˙OH) and the superoxide radical (O2˙-) have been found to play significant roles in the POD-like activity, and ˙OH is the major radical. The O-doping could reduce the transition-state energy barrier of H2O2 dissociation, thus promoting the decomposition of H2O2 to ˙OH and inducing the formation of O2˙-. Therefore, O-doping is an effective method for enhancing the catalytic activity of CoS2 NPs. Furthermore, due to the excellent oxidation property of ˙OH and O2˙-, this nanozyme exhibited efficient catalytic activity towards the degradation of organic dyes with H2O2. This manuscript provides a new inspiration for designing more promising anion-defective transition-metal sulfide nanozymes for different applications.

Sandwich-like NiCo-LDH/rGO with Rich Mesopores and High Charge Transfer Capability for Flexible Supercapacitors

Layered double metal hydroxides (LDHs) have been widely used in the energy storage field due to adjustable composition and interlayer spacing. However, easy to agglomerate, poor electrical conductivity, and large...

Sandwich-type electrochemical immunosensor constructed using three-dimensional lamellar stacked CoS2@C hollow nanotubes prepared by template-free method to detect carcinoembryonic antigen

Effective treatment of cancer depends on early detection of tumor markers. In this paper, an effective template-free method was used to prepare CoS₂@C three-dimensional hollow sheet nanotubes as the matrix of the immunosensor. The unique three-dimensional hybrid hollow tubular nanostructure provides greater contact area and enhanced detection limit. The CoS₂@C-NH₂-HRP nanomaterial was synthesized as a marker and had a high specific surface area, which can effectively improve the electrocatalytic ability of hydrogen peroxide (H₂O₂) reduction while increasing the amount of capture-fixed carcinoembryonic antigen antibody (anti-CEA). In addition, the co-bonded horseradish peroxidase (HRP) can further promote the redox of H₂O₂ and amplify the electrical signal. Carcinoembryonic antigen (CEA) was quantified by immediate current response (i-t), and the prepared immunosensor had good analytical performance under optimized conditions. The current signal and the concentration of CEA were linear in the range of 0.001-80 ng/mL, and the detection limit was 0.33 pg/mL (S/N = 3). The designed immunosensor has good selectivity, repeatability and stability, and the detection of human serum samples shows good performance. Furthermore, electrochemical immunosensor has broad application prospects in the clinical diagnosis of CEA.

Ni/Ni3C core–shell nanoparticles encapsulated in N-doped bamboo-like carbon nanotubes towards efficient overall water splitting

A novel electrocatalyst of Ni/Ni₃C core–shell nanoparticles embedded in bamboo-like N-doped carbon nanotubes has been successfully synthesized, which exhibits superior overall water splitting performance in alkaline solution.

Synthesis of urchin-like Co3O4 spheres for application in oxygen evolution reaction

For oxygen evolution electrocatalysis of water splitting, unique urchin-shaped Co₃O₄ spheres were successfully grown on nickel foam by hydrothermal synthesis of Co(OH)F precursor and subsequent annealing method. The formation process was investigated by the evolution of phase structure and morphology with hydrothermal reaction time. And it can be explained by a 'disks-flowers-urchins' mechanism. Moreover, the Co₃O₄ urchins/NF exhibits considerable catalytic properties. It shows a low overpotential of 308 mV at a current density of 20 mA cm^-2 in alkaline solution. In the meantime, such material has a small Tafel slope of 82.1 mV dec^-1, large electrochemical active surface area and good long-term stability. The obvious promotion of oxygen evolution reaction performance can be attributed to the special morphology and the direct attachment to the substrate, which improve the exposed active sites, lower the internal resistance and accelerate the charge transport. Thus, the Co₃O₄ urchins/NF not only has a great potential promising behavior, but also provides the basis for subsequent performance improvement.

Recent Progresses in Electrocatalysts for Water Electrolysis

Abstract

The study of hydrogen evolution reaction and oxygen evolution reaction electrocatalysts for water electrolysis is a developing field in which noble metal-based materials are commonly used. However, the associated high cost and low abundance of noble metals limit their practical application. Non-noble metal catalysts, aside from being inexpensive, highly abundant and environmental friendly, can possess high electrical conductivity, good structural tunability and comparable electrocatalytic performances to state-of-the-art noble metals, particularly in alkaline media, making them desirable candidates to reduce or replace noble metals as promising electrocatalysts for water electrolysis. This article will review and provide an overview of the fundamental knowledge related to water electrolysis with a focus on the development and progress of non-noble metal-based electrocatalysts in alkaline, polymer exchange membrane and solid oxide electrolysis. A critical analysis of the various catalysts currently available is also provided with discussions on current challenges and future perspectives. In addition, to facilitate future research and development, several possible research directions to overcome these challenges are provided in this article.

Graphical Abstract