1
|
Thi LLD, Ho TH, Vu TV, Nguyen DLT, Tran MX, Rhim SH, Nguyen CD. P-incorporated CuO/Cu 2S heteronanorods as efficient electrocatalysts for the glucose oxidation reaction toward highly sensitive and selective glucose sensing. Phys Chem Chem Phys 2023; 26:249-260. [PMID: 38054775 DOI: 10.1039/d3cp04095j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/07/2023]
Abstract
Currently, tremendous efforts have been made to explore efficient glucose oxidation electrocatalysts for enzymeless glucose sensors to meet the urgent demands for accurate and fast detection of glucose in the fields of health care and environmental monitoring. In this work, an advanced nanostructured material based on the well-aligned CuO/Cu2S heteronanorods incorporated with P atoms is successfully synthesized on a copper substrate. The as-synthesized material shows high catalytic behavior accompanied by outstanding electrical conductivity. This, combined with the unique morphology of unstacked nanorod arrays, which endow the entire material with a greater number of exposed active sites, make the proposed material act as a highly efficient electrocatalyst for the glucose oxidation reaction. Density functional theory calculations demonstrate that P doping endows P-doped CuO/Cu2S with excellent electrical conductivity and glucose adsorption capability, significantly improving its catalytic performance. As a result, a non-enzymatic glucose sensor fabricated based on our proposed material exhibits a broad linear detection range (0.02-8.2 mM) and a low detection limit (0.95 μM) with a high sensitivity of 2.68 mA mM-1 cm-2 and excellent selectivity.
Collapse
Affiliation(s)
- L L D Thi
- Laboratory for Advanced Nanomaterials and Sustainable Energy Technologies, Institute for Computational Science and Artificial Intelligence, Van Lang University, Ho Chi Minh City, Vietnam.
- Faculty of Applied Technology, School of Technology, Van Lang University, Ho Chi Minh City, Vietnam
| | - Thi H Ho
- Laboratory for Computational Physics, Institute for Computational Science and Artificial Intelligence, Van Lang University, Ho Chi Minh City, Vietnam
- Faculty of Mechanical - Electrical and Computer Engineering, School of Technology, Van Lang University, Ho Chi Minh City, Vietnam
| | - Tuan V Vu
- Laboratory for Computational Physics, Institute for Computational Science and Artificial Intelligence, Van Lang University, Ho Chi Minh City, Vietnam
- Faculty of Mechanical - Electrical and Computer Engineering, School of Technology, Van Lang University, Ho Chi Minh City, Vietnam
| | - Dang L T Nguyen
- Laboratory for Advanced Nanomaterials and Sustainable Energy Technologies, Institute for Computational Science and Artificial Intelligence, Van Lang University, Ho Chi Minh City, Vietnam.
- Faculty of Applied Technology, School of Technology, Van Lang University, Ho Chi Minh City, Vietnam
| | - Minh Xuan Tran
- Laboratory for Advanced Nanomaterials and Sustainable Energy Technologies, Institute for Computational Science and Artificial Intelligence, Van Lang University, Ho Chi Minh City, Vietnam.
- Faculty of Applied Technology, School of Technology, Van Lang University, Ho Chi Minh City, Vietnam
| | - Sonny H Rhim
- Department of Physics and Energy Harvest Storage Research Center, University of Ulsan, Ulsan, 44610, Republic of Korea
| | - C-D Nguyen
- The University of Danang - University of Science and Education, Danang 550000, Vietnam.
| |
Collapse
|
2
|
Detection of glucose using a thin-walled honeycombed MnO2 grown on mesoporous CoFe2O4 nanosheets. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130817] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
3
|
A nanoporous diamond particle microelectrode and its surface modification. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.141015] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
4
|
The reduced phosphomolybdate as dual-functional electrocatalyst and electrochemical sensor for detecting hydrogen peroxide and dopamine. J SOLID STATE CHEM 2022. [DOI: 10.1016/j.jssc.2022.123209] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
5
|
Zhao T, Cui LP, Yu K, Lv JH, Ma YJ, Yang AS, Zhou BB. Porous {P 6Mo 18O 73}-type Poly(oxometalate) Metal-Organic Frameworks for Improved Pseudocapacitance and Electrochemical Sensing Performance. ACS APPLIED MATERIALS & INTERFACES 2022; 14:30099-30111. [PMID: 35729744 DOI: 10.1021/acsami.2c06369] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
{P6Mo18} poly(oxometalate) (POM) clusters have huge steric hindrance and limited active oxygen atoms, which make them difficult to combine with metal-organic units to form three-dimensional (3D) porous structures. Therefore, functionalization of such POMs has always been a bottleneck that is difficult to break through. In this study, {P6Mo18} POM was successfully grafted on a lock-like metal-organic chain to generate a multiporous coordination polymer, [{Na(H2O)(H2btb)}{Cu4I(H2O)(pz)5Cl}{H2Sr⊂P6Mo2VMo16VIO73}]·3H2O (1) (pz = pyrazine; btb = 1,4-bis(1,2,4-triazole) butane). Meanwhile, a zero-dimensional (0-D) control compound with only btb ligands as counterions, (H4btb)[H4Sr⊂P6Mo2VMo16VIO73]·3H2O (2), was also obtained via a hydrothermal reaction. Compound 1 represents the first basket-type 3D poly(oxometalate) metal-organic framework (POMOF) assembly, which possesses interpenetrating pores and complex topology. 1-GO-CPE displays improved supercapacitor (SC) performance (the specific capacitance of 929.4 F g-1 at a current density of 3 A g-1 with 94.1% of cycle efficiency after 5000 cycles) compared with 2-GO-CPE and most reported POMOF electrode materials, which may be due to the outstanding redox capability of basket-POM, introduction of metal-organic chains, intersecting pores, and excellent conductivity of graphene. An asymmetric SC device with 1-GO-CPE as the negative electrode exhibits an energy density of 29.7 Wh kg-1 with a power density of 3148.2 W kg-1 and long-lasting cycling life. In addition, 1-GO-GCE as an electrochemical sensor responds to dopamine (DA) at a voltage of 0.40 V and shows lower detection limits (0.19 μM (signal-to-noise ratio (SNR) = 3)), higher selectivity, and good reproducibility in the linear range of 0.56 μM to 0.24 mM. The ability to accurately detect the content of DA in biological samples further proves the feasibility of the sensor in practical applications.
Collapse
Affiliation(s)
- Tingting Zhao
- Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, P. R. China
| | - Li-Ping Cui
- Academy of Life Science and Technology, State Key Laboratory of Molecular Genetics, Harbin Normal University, Harbin 150025, P. R. China
| | - Kai Yu
- Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, P. R. China
- Key Laboratory of Photochemical Biomaterials and Energy Storage Material, Harbin Normal University, Harbin 150025, Heilongjiang, P. R. China
| | - Jing-Hua Lv
- Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, P. R. China
| | - Ya-Jie Ma
- Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, P. R. China
- Key Laboratory of Photochemical Biomaterials and Energy Storage Material, Harbin Normal University, Harbin 150025, Heilongjiang, P. R. China
| | - Ao-Shuang Yang
- Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, P. R. China
| | - Bai-Bin Zhou
- Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, P. R. China
- Key Laboratory of Photochemical Biomaterials and Energy Storage Material, Harbin Normal University, Harbin 150025, Heilongjiang, P. R. China
| |
Collapse
|
6
|
Tailored design of Ni(OH)2 nanocages internally decorated with CuS nanocages to mutually ameliorate electrocatalytic dynamics for highly sensitive glucose detection. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2021.115893] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
7
|
Chen S, Chen W, Wang Y, Wang X, Ding Y, Zhao D, Liu J. Facile one-pot method of AuNPs/PEDOT/CNT composites for simultaneous detection of dopamine with a high concentration of ascorbic acid and uric acid. RSC Adv 2022; 12:15038-15045. [PMID: 35702427 PMCID: PMC9115873 DOI: 10.1039/d2ra01262f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2022] [Accepted: 04/29/2022] [Indexed: 11/21/2022] Open
Abstract
A facile one-pot method was used to synthesize ternary composite material. This modified electrode exhibited good ability of detecting dopamine. It also exhibited excellent anti-interference ability and stability.
Collapse
Affiliation(s)
- Shaohua Chen
- Anhui Key Laboratory of Advanced Building Materials, Anhui Jianzhu University, Hefei 230022, Anhui Province, P. R. China
| | - Wenliang Chen
- Anhui Key Laboratory of Advanced Building Materials, Anhui Jianzhu University, Hefei 230022, Anhui Province, P. R. China
| | - Yihua Wang
- Anhui Key Laboratory of Advanced Building Materials, Anhui Jianzhu University, Hefei 230022, Anhui Province, P. R. China
| | - Xiufang Wang
- Anhui Key Laboratory of Advanced Building Materials, Anhui Jianzhu University, Hefei 230022, Anhui Province, P. R. China
| | - Yi Ding
- Anhui Key Laboratory of Advanced Building Materials, Anhui Jianzhu University, Hefei 230022, Anhui Province, P. R. China
| | - Donglin Zhao
- Anhui Key Laboratory of Advanced Building Materials, Anhui Jianzhu University, Hefei 230022, Anhui Province, P. R. China
| | - Jiyu Liu
- Anhui Key Laboratory of Advanced Building Materials, Anhui Jianzhu University, Hefei 230022, Anhui Province, P. R. China
| |
Collapse
|
8
|
Zhu R, Zhao Z, Cao J, Li H, Ma L, Zhou K, Yu Z, Wei Q. Effect of Pt-Ni deposition sequence on the bimetal-modified boron-doped diamond on catalytic performance for glucose oxidation in neutral media. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116084] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
9
|
Baluchová S, Brycht M, Taylor A, Mortet V, Krůšek J, Dittert I, Sedláková S, Klimša L, Kopeček J, Schwarzová-Pecková K. Enhancing electroanalytical performance of porous boron-doped diamond electrodes by increasing thickness for dopamine detection. Anal Chim Acta 2021; 1182:338949. [PMID: 34602205 DOI: 10.1016/j.aca.2021.338949] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/06/2021] [Revised: 07/20/2021] [Accepted: 08/11/2021] [Indexed: 12/24/2022]
Abstract
Novel porous boron-doped diamond (BDDporous)-based materials have attracted lots of research interest due to their enhanced detection ability and biocompatibility, favouring them for use in neuroscience. This study reports on morphological, spectral, and electrochemical characterisation of three BDDporous electrodes of different thickness given by a number of deposited layers (2, 3 and 5). These were prepared using microwave plasma-enhanced chemical vapour deposition on SiO2 nanofiber-based scaffolds. Further, the effect of number of layers and poly-l-lysine coating, commonly employed in neuron cultivation experiments, on sensing properties of the neurotransmitter dopamine in a pH 7.4 phosphate buffer media was investigated. The boron doping level of ∼2 × 1021 atoms cm-3 and increased content of non-diamond (sp2) carbon in electrodes with more layers was evaluated by Raman spectroscopy. Cyclic voltammetric experiments revealed reduced working potential windows (from 2.4 V to 2.2 V), higher double-layer capacitance values (from 405 μF cm-2 to 1060 μF cm-2), enhanced rates of electron transfer kinetics and larger effective surface areas (from 5.04 mm2 to 7.72 mm2), when the number of porous layers increases. For dopamine, a significant boost in analytical performance was recognized with increasing number of layers using square-wave voltammetry: the highest sensitivity of 574.1 μA μmol-1 L was achieved on a BDDporous electrode with five layers and dropped to 35.9 μA μmol-1 L when the number of layers decreased to two. Consequently, the lowest detection limit of 0.20 μmol L-1 was obtained on a BDDporous electrode with five layers. Moreover, on porous electrodes, enhanced selectivity for dopamine detection in the presence of ascorbic acid and uric acid was demonstrated. The application of poly-l-lysine coating on porous electrode surface resulted in a decrease in dopamine peak currents by 17% and 60% for modification times of 1 h and 15 h, respectively. Hence, both examined parameters, the number of deposited porous layers and the presence of poly-l-lysine coating, were proved to considerably affect the characteristics and performance of BDDporous electrodes.
Collapse
Affiliation(s)
- Simona Baluchová
- Charles University, Faculty of Science, Department of Analytical Chemistry, UNESCO Laboratory of Environmental Electrochemistry, Albertov 6, 128 00, Prague 2, Czech Republic; FZU - Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21, Prague 8, Czech Republic
| | - Mariola Brycht
- University of Lodz, Faculty of Chemistry, Department of Inorganic and Analytical Chemistry, Tamka 12, 91-403, Łódź, Poland
| | - Andrew Taylor
- FZU - Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21, Prague 8, Czech Republic
| | - Vincent Mortet
- FZU - Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21, Prague 8, Czech Republic; Czech Technical University in Prague, Faculty of Biomedical Engineering, Sítná Sq. 3105, 272 01, Kladno, Czech Republic
| | - Jan Krůšek
- Institute of Physiology of the Czech Academy of Sciences, Vídeňská 1083, 142 20, Prague 4, Czech Republic
| | - Ivan Dittert
- Institute of Physiology of the Czech Academy of Sciences, Vídeňská 1083, 142 20, Prague 4, Czech Republic
| | - Silvia Sedláková
- FZU - Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21, Prague 8, Czech Republic
| | - Ladislav Klimša
- FZU - Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21, Prague 8, Czech Republic
| | - Jaromír Kopeček
- FZU - Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21, Prague 8, Czech Republic
| | - Karolina Schwarzová-Pecková
- Charles University, Faculty of Science, Department of Analytical Chemistry, UNESCO Laboratory of Environmental Electrochemistry, Albertov 6, 128 00, Prague 2, Czech Republic.
| |
Collapse
|
10
|
Naikoo GA, Salim H, Hassan IU, Awan T, Arshad F, Pedram MZ, Ahmed W, Qurashi A. Recent Advances in Non-Enzymatic Glucose Sensors Based on Metal and Metal Oxide Nanostructures for Diabetes Management- A Review. Front Chem 2021; 9:748957. [PMID: 34631670 PMCID: PMC8493127 DOI: 10.3389/fchem.2021.748957] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2021] [Accepted: 09/09/2021] [Indexed: 01/23/2023] Open
Abstract
There is an undeniable growing number of diabetes cases worldwide that have received widespread global attention by many pharmaceutical and clinical industries to develop better functioning glucose sensing devices. This has called for an unprecedented demand to develop highly efficient, stable, selective, and sensitive non-enzymatic glucose sensors (NEGS). Interestingly, many novel materials have shown the promising potential of directly detecting glucose in the blood and fluids. This review exclusively encompasses the electrochemical detection of glucose and its mechanism based on various metal-based materials such as cobalt (Co), nickel (Ni), zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), titanium (Ti), iridium (Ir), and rhodium (Rh). Multiple aspects of these metals and their oxides were explored vis-à-vis their performance in glucose detection. The direct glucose oxidation via metallic redox centres is explained by the chemisorption model and the incipient hydrous oxide/adatom mediator (IHOAM) model. The glucose electrooxidation reactions on the electrode surface were elucidated by equations. Furthermore, it was explored that an effective detection of glucose depends on the aspect ratio, surface morphology, active sites, structures, and catalytic activity of nanomaterials, which plays an indispensable role in designing efficient NEGS. The challenges and possible solutions for advancing NEGS have been summarized.
Collapse
Affiliation(s)
- Gowhar A. Naikoo
- Department of Mathematics and Sciences, College of Arts and Applied Sciences, Dhofar University, Salalah, Oman
| | - Hiba Salim
- Department of Mathematics and Sciences, College of Arts and Applied Sciences, Dhofar University, Salalah, Oman
| | | | - Tasbiha Awan
- Department of Mathematics and Sciences, College of Arts and Applied Sciences, Dhofar University, Salalah, Oman
| | - Fareeha Arshad
- Department of Biochemistry, Aligarh Muslim University, Aligarh, India
| | - Mona Z. Pedram
- Mechanical Engineering-Energy Division, K. N. Toosi University of Technology, Tehran, Iran
| | - Waqar Ahmed
- School of Mathematics and Physics, College of Science, University of Lincoln, Lincoln, United Kingdom
| | - Ahsanulhaq Qurashi
- Department of Chemistry, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
| |
Collapse
|
11
|
Pleskov Y, Krotova M, Ekimov E. The compacts of boron-doped synthetic diamond: Methods for the increasing of their electrochemical activity. J Electroanal Chem (Lausanne) 2021. [DOI: 10.1016/j.jelechem.2021.115203] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
12
|
Wang S, Guo P, Ma G, Wei J, Wang Z, Cui L, Sun L, Wang A. Three-dimensional hierarchical mesoporous carbon for regenerative electrochemical dopamine sensor. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2020.137016] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
13
|
Polycrystalline boron-doped diamond-based electrochemical biosensor for simultaneous detection of dopamine and melatonin. Anal Chim Acta 2020; 1135:73-82. [PMID: 33070861 DOI: 10.1016/j.aca.2020.08.042] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2020] [Revised: 08/13/2020] [Accepted: 08/22/2020] [Indexed: 11/20/2022]
Abstract
In this study, boron-doped diamond (BDD) electrodes with varied B contents are prepared to determine the feasibility of the direct usage of BDD as an electrochemical biosensor without any modification. The electrochemical performance of the electrodes was investigated through the characterization of electrochemical impedance spectroscopy for potassium ferricyanide/potassium ferrocyanide (K3Fe(CN)6/K4Fe(CN)6) redox couples, as well as through qualitative and quantitative analysis of the two biomolecules dopamine (DA) and melatonin (MLT). The results show that the B content of BDD is the primary parameter for controlling the electrocatalytic current, that is, the response sensitivity. However, the abundant crystal planes and low background current are the key factors in improving the selectivity of the biomarkers to identify multiple analytes. Considering the catalytic current and its ability to distinguish the biomolecules, BDD with a B source carrier gas flow rate of 18 sccm is used as the sensing electrode for the simultaneous detection of DA and MLT. The response peak potential difference reaches 500 mV, and the linear concentration range for the two analytes is 0.4-600 μM, with detection limits of 0.1 μM for DA and 0.003 μM for MLT. These results match those observed for electrochemical sensors modified by various sensitive materials. BDD electrodes show good chemical resistance, good stability, and no pollution and are suitable for long-term usage as biomarker sensors.
Collapse
|
14
|
Ma Z, Wang Q, Gao N, Li H. Electrochemical detection of clenbuterol with gold-nanoparticles-modified porous boron-doped diamond electrode. Microchem J 2020. [DOI: 10.1016/j.microc.2020.104911] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
15
|
Fabrication of Au/Ni/boron-doped diamond electrodes via hydrogen plasma etching graphite and amorphous boron for efficient non-enzymatic sensing of glucose. J Electroanal Chem (Lausanne) 2020. [DOI: 10.1016/j.jelechem.2020.114264] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
|
16
|
Radaic A, Martins-de-Souza D. The state of the art of nanopsychiatry for schizophrenia diagnostics and treatment. NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE 2020; 28:102222. [DOI: 10.1016/j.nano.2020.102222] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/09/2019] [Revised: 03/18/2020] [Accepted: 05/02/2020] [Indexed: 02/07/2023]
|
17
|
López-Fernández E, Gil-Rostra J, Espinós JP, González-Elipe AR, de Lucas Consuegra A, Yubero F. Chemistry and Electrocatalytic Activity of Nanostructured Nickel Electrodes for Water Electrolysis. ACS Catal 2020. [DOI: 10.1021/acscatal.0c00856] [Citation(s) in RCA: 32] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- E. López-Fernández
- Laboratory of Nanotechnology on Surfaces and Plasma, Institute of Materials Science of Seville (CSIC-Univ. Sevilla), Av. Américo Vespucio 49, E-41092 Sevilla, Spain
- Department of Chemical Engineering, School of Chemical Sciences and Technologies, University of Castilla-La Mancha, Avda. Camilo José Cela 12, E-13071, Ciudad Real, Spain
| | - J. Gil-Rostra
- Laboratory of Nanotechnology on Surfaces and Plasma, Institute of Materials Science of Seville (CSIC-Univ. Sevilla), Av. Américo Vespucio 49, E-41092 Sevilla, Spain
| | - J. P. Espinós
- Laboratory of Nanotechnology on Surfaces and Plasma, Institute of Materials Science of Seville (CSIC-Univ. Sevilla), Av. Américo Vespucio 49, E-41092 Sevilla, Spain
| | - A. R. González-Elipe
- Laboratory of Nanotechnology on Surfaces and Plasma, Institute of Materials Science of Seville (CSIC-Univ. Sevilla), Av. Américo Vespucio 49, E-41092 Sevilla, Spain
| | - A. de Lucas Consuegra
- Department of Chemical Engineering, School of Chemical Sciences and Technologies, University of Castilla-La Mancha, Avda. Camilo José Cela 12, E-13071, Ciudad Real, Spain
| | - F. Yubero
- Laboratory of Nanotechnology on Surfaces and Plasma, Institute of Materials Science of Seville (CSIC-Univ. Sevilla), Av. Américo Vespucio 49, E-41092 Sevilla, Spain
| |
Collapse
|
18
|
Miao D, Liu G, Wei Q, Hu N, Zheng K, Zhu C, Liu T, Zhou K, Yu Z, Ma L. Electro-activated persulfate oxidation of malachite green by boron-doped diamond (BDD) anode: effect of degradation process parameters. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2020; 81:925-935. [PMID: 32541111 DOI: 10.2166/wst.2020.176] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
In this paper, boron-doped diamond (BDD) electro-activated persulfate was studied to decompose malachite green (MG). The degradation results indicate that the decolorization performance of MG for the BDD electro-activated persulfate (BDD-EAP) system is 3.37 times that of BDD electrochemical oxidation (BDD-EO) system, and BDD-EAP system also exhibited an enhanced total organic content (TOC) removal (2.2 times) compared with BDD-EO system. Besides, the degradation parameters such as persulfate concentration, current density, and pH were studied in detail. In a wider range of pH (2-10), the MG can be efficiently removed (>95%) in 0.02 M persulfate solution with a low current density of 1.7 mA/cm2 after 30 min. The BDD-EAP technology decomposes organic compounds without the diffusion limitation and avoids pH adjustment, which makes the EO treatment of organic wastewater more efficient and more economical.
Collapse
Affiliation(s)
- Dongtian Miao
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Guoshuai Liu
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China
| | - Qiuping Wei
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Naixiu Hu
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Kuangzhi Zheng
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Chengwu Zhu
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Ting Liu
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Kechao Zhou
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Zhiming Yu
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| | - Li Ma
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha 410083, China E-mail:
| |
Collapse
|
19
|
Zeng S, Wei Q, Long H, Meng L, Ma L, Cao J, Li H, Yu Z, Lin CT, Zhou K, Sharel Pei E. Annealing temperature regulating the dispersity and composition of nickel-carbon nanoparticles for enhanced glucose sensing. J Electroanal Chem (Lausanne) 2020. [DOI: 10.1016/j.jelechem.2020.113827] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
20
|
Yang T, Tian L, Zhou E, He G, Chen D, Xie J. Design of Ni(OH) 2 nanocages@MnO 2 nanosheets core-shell architecture to jointly facilitate electrocatalytic dynamic for highly sensitive detection of dopamine. Biosens Bioelectron 2019; 143:111634. [PMID: 31473379 DOI: 10.1016/j.bios.2019.111634] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2019] [Revised: 08/11/2019] [Accepted: 08/24/2019] [Indexed: 01/03/2023]
Abstract
In this work, Ni(OH)2 nanocages@MnO2 nanosheets core-shell architecture (Ni(OH)2 NCs@MnO2 NSs CSA) was successfully prepared through coordinated etching and precipitation (CEP) route followed by hydrothermal reaction, and then tested as sensitive electrode material for detection of dopamine (DA). The three dimensional (3D) hollow Ni(OH)2 core effectively prevented the aggregation of MnO2 NSs, leading to high utilization rate of MnO2 NSs. Meanwhile, the two dimensional (2D) MnO2 shell endowed Ni(OH)2 NCs with larger specific area and abundant diffusion channels, facilitating mass transport. Ni(OH)2 NCs@MnO2 NSs CSA modified glassy carbon electrode (GCE) exhibited two satisfying sensitivities of 467.1 and 1249.9 μA mM-1 cm-2 within the two linear ranges of 0.02-16.30 μM and 18.30-118.58 μM, respectively. Furthermore, Ni(OH)2 NCs@MnO2 NSs CSA/GCE presented low detection limit of 1.75 nM and short response time of 1.14 s. Overall, Ni(OH)2 NCs@MnO2 NSs/GCE looks promising for analytical sensing of DA thanks to its prominent electrocatalytic dynamic issued from the 3D hollow structure@2D nanosheets core-shell architecture.
Collapse
Affiliation(s)
- Tong Yang
- Research Institute for New Materials Technology, Chongqing University of Arts and Sciences, Chongqing, 400000, PR China; Faculty of Materials and Energy, Southwest University, Chongqing, 400000, PR China
| | - Liangliang Tian
- Research Institute for New Materials Technology, Chongqing University of Arts and Sciences, Chongqing, 400000, PR China; Faculty of Materials and Energy, Southwest University, Chongqing, 400000, PR China.
| | - Enmin Zhou
- School of Science, Chongqing University of Posts and Telecommunication, Chongqing, 400000, PR China
| | - Gege He
- School of Science, Xi'an Jiaotong University, Xi'an, Shanxi, 710000, PR China
| | - Daidong Chen
- Research Institute for New Materials Technology, Chongqing University of Arts and Sciences, Chongqing, 400000, PR China; Faculty of Materials and Energy, Southwest University, Chongqing, 400000, PR China
| | - Jinqiu Xie
- Research Institute for New Materials Technology, Chongqing University of Arts and Sciences, Chongqing, 400000, PR China
| |
Collapse
|
21
|
Fabrication of Au Nanoparticle-Decorated MoS2 Nanoslices as Efficient Electrocatalysts for Electrochemical Detection of Dopamine. Catalysts 2019. [DOI: 10.3390/catal9080653] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023] Open
Abstract
Herein, MoS2 nanoslices were simply prepared by using ultrasonic treatment, and were further decorated with Au nanoparticles (AuNPs) through an electrodeposition process to obtain the MoS2/Au nanocomposites. The obtained nanocomposites display synergetic electrocatalytic effect for the oxidation of dopamine due to the large surface area and two-dimensional structure of the MoS2 nanoslices, combining with the high catalytic activity and good conductivity of AuNPs. An electrochemical sensor was constructed based on MoS2/Au-modified carbon paste electrode, for sensitive and quantitative determination of dopamine. The prepared electrochemical sensor proves excellent analytical performances: very high sensitivity, wide linear ranges (0.5–300 μM), and low detection limit (76 nM). Moreover, the dopamine sensor also displays high selectivity, good reproducibility and stability, and can be used in real sample analysis. The method of fabricating high-efficiency electrocatalysts and electrochemical sensors proposed in this study provides a good reference for developing more functionalized nanocomposites and for extending practical applications.
Collapse
|
22
|
The effect of heat treatment time on the carbon-coated nickel nanoparticles modified boron-doped diamond composite electrode for non-enzymatic glucose sensing. J Electroanal Chem (Lausanne) 2019. [DOI: 10.1016/j.jelechem.2019.04.023] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
|
23
|
High-performance non-enzymatic glucose sensor based on Ni/Cu/boron-doped diamond electrode. J Electroanal Chem (Lausanne) 2019. [DOI: 10.1016/j.jelechem.2019.03.043] [Citation(s) in RCA: 22] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
|
24
|
A hollow urchin-like α-MnO2 as an electrochemical sensor for hydrogen peroxide and dopamine with high selectivity and sensitivity. Mikrochim Acta 2019; 186:210. [DOI: 10.1007/s00604-019-3316-x] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2019] [Accepted: 02/11/2019] [Indexed: 10/27/2022]
|
25
|
Gao X, Li W, Mei R, Zhu C, Zhou B, Ma L, Wei Q, Liu T. Effect of the B2H6/CH4/H2 ratios on the structure and electrochemical properties of boron-doped diamond electrode in the electrochemical oxidation process of azo dye. J Electroanal Chem (Lausanne) 2019. [DOI: 10.1016/j.jelechem.2018.11.009] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
26
|
Wang M, Cui M, Liu W, Liu X. Highly dispersed conductive polypyrrole hydrogels as sensitive sensor for simultaneous determination of ascorbic acid, dopamine and uric acid. J Electroanal Chem (Lausanne) 2019. [DOI: 10.1016/j.jelechem.2018.10.057] [Citation(s) in RCA: 37] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2023]
|
27
|
Zhu C, Jiang C, Chen S, Mei R, Wang X, Cao J, Ma L, Zhou B, Wei Q, Ouyang G, Yu Z, Zhou K. Ultrasound enhanced electrochemical oxidation of Alizarin Red S on boron doped diamond(BDD) anode:Effect of degradation process parameters. CHEMOSPHERE 2018; 209:685-695. [PMID: 29958164 DOI: 10.1016/j.chemosphere.2018.06.137] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2018] [Revised: 06/20/2018] [Accepted: 06/21/2018] [Indexed: 06/08/2023]
Abstract
Textile wastewater is characterized by high toxicity, complex structure, and resistance to biodegradation. Therefore, advanced oxidation technologies have received extensive attention. However, it is usually difficult to achieve a desired degradation effect using a single technology. The combination of various advanced oxidation technologies is an important way to achieve efficient degradation of organic wastewater. The present investigation was focused on ultrasound enhanced electrochemical oxidation (US-EO) of typical anthracene Alizarin Red S dye on a boron doped diamond anode. Our work indicates that ultrasonic oxidation technology which is mainly based on cavitation, can produce strongly oxidizing active substances such as OH, HO2, O, and H2O2, that accelerate the destruction of the dye molecular structure and achieve dye decolorization and mineralization. The effects on cavitation and decomposition of ARS by the parameters that affect degradation, including solution temperature, initial pH, and electrolytes, were examined. Results show that low temperature was more conducive to ultrasonic cavitation in the US-EO process; the degradation efficiency rate of EO was higher than that of US-EO when the solution temperature was above 45 °C. Ultrasonic cavitation was significantly more efficient in acid than in alkaline conditions. Almost 100% color removal and 86.07% COD removal was achieved for 100 mg L-1 ARS concentration with a 0.05 M Na2SO4 electrolyte, temperature of 30 °C and pH of 4.97 after 3 h. GC-MS analysis showed that the intermediate products of ARS in the US-EO process were phthalic anhydride, PEAs and bisphenol A, which is eventually mineralized to CO2 and H2O.
Collapse
Affiliation(s)
- Chengwu Zhu
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| | - Chuqi Jiang
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| | - Shou Chen
- Shenzhen 863 New Material and Technology Co., Ltd, BeautyStar Sci-tech Industrial Park, 2/F, Building 2, No.1001, Longgang Road, (Pingdi Section), Longgang District, Shenzhen, 518117, PR China
| | - Ruiqiong Mei
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| | - Xin Wang
- Shenzhen 863 New Material and Technology Co., Ltd, BeautyStar Sci-tech Industrial Park, 2/F, Building 2, No.1001, Longgang Road, (Pingdi Section), Longgang District, Shenzhen, 518117, PR China
| | - Jun Cao
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| | - Li Ma
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| | - Bo Zhou
- School of Engineering and Materials Science, Queen Mary University of London, Mile End, London, E1 4NS, UK
| | - Qiuping Wei
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China.
| | - Guangqi Ouyang
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| | - Zhiming Yu
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| | - Kechao Zhou
- State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University, Changsha, 410083, PR China
| |
Collapse
|