A bipotentiostat based separation-free method for simultaneous flow injection analysis of chromium (III) and (VI) species

A facile fluorescence platform for chromium and ascorbic acid detection based on "on-off-on" strategy

In this paper, a facile and rapid fluorescence "on-off-on" strategy for the detection of chromium (Cr(VI)) and ascorbic acid (AA) was developed, which was based on the water-soluble carbon dots (CDs). The CDs was synthesized by a microwave-assisted treatment of L-tartaric acid, citric acid, and urea. The CDs have many advantages, such as high fluorescence quantum yield (20.5%) and good fluorescence stability. Based on inner filter effect (IFE) and static quenching, the fluorescence of the CDs can be quenched by Cr(VI) quickly; while the reduction of IFE and reducing action can make the fluorescence of the CDs recover by AA efficiently. Moreover, under the optimal experimental conditions, the CDs had a good detection performance for Cr(VI) in the range of 0.8 ∼ 189 µM with the limit of detection (LOD) of 0.16 µM. The linear detection for AA was ranged from 0.43 to 25.7 µM with a LOD of 0.1 µM. More importantly, the as-constructed fluorescence detecting platform was successfully applied for Cr(VI) and AA detection in the environmental samples and fruit samples, respectively. In addition, the application potential of the CDs in fluorescent films and anti-counterfeiting materials was further discussed in detail. This work will provide a novel idea for designing a portable sensor based on the CDs to quickly and sensitively detect Cr(VI) and AA.

Electrochemical reduction of Cr(VI) in water: lessons learned from fundamental studies and applications

Converting toxic Cr(vi) to benign Cr(iii) would offer a solution to decontaminate drinking water. Electrochemical methods are ideally suited to carry out this reduction without added external reductants. Achieving this transformation at low overpotentials requires mediating the transfer of protons and electrons to Cr(vi). In this review thermodynamic parameters will be discussed to understand Cr(vi) speciation in water and identify reduction pathways. The electrochemical reduction of Cr(vi) at bare electrodes is reviewed and mechanistic considerations are discussed. Works on modified electrodes are compared to identify key parameters influencing the reduction. An overview of current applications to Cr(vi) reduction is briefly discussed to link fundamental studies to applications.

In situ electro-organic synthesis of hydroquinone using anisole on MWCNT/Nafion modified electrode surface and its heterogeneous electrocatalytic reduction of toxic Cr(vi) species

Owing to its electro-inactive character, anisole (phenylmethyl ether, PhOCH3) and its related derivatives have been used as electrolytes in electrochemistry. Herein, we report a simple one-step electro-organic conversion of PhOCH3 to hydroquinone (HQ) on a pristine-MWCNT-Nafion modified electrode glassy carbon electrode surface, GCE/Nf-MWCNT@HQ, in pH 2 KCl-HCl solution within 15 min of working time. The chemically modified electrode showed a highly redox-active and well-defined signal at an apparent standard electrode potential, E o' = 0.45 V vs. Ag/AgCl (A2/C2) with a surface excess value, Γ HQ = 2.1 × 10-9 mol cm-2. The formation of surface-confined HQ is confirmed by collective physicochemical and spectroscopic characterizations using TEM, UV-Vis, Raman, FTIR, NMR and GC-MS techniques and with several control experiments. Consent about the mechanism, the 2.1% of intrinsic iron present in the pristine-MWCNT is involved for specific complexation with oxygen donor organic molecule (PhOCH3) and hydroxylation in presence of H2O2 (nucleophilic attack) for HQ-product formation. The GCE/Nf-MWCNT@HQ showed an excellent heterogeneous-electrocatalytic reduction of Cr(vi) species in acidic solution with a linear calibration plot in a range, 5-500 ppm at an applied potential, 0.4 V vs. Ag/AgCl with a detection limit, 230 ppb (S/N = 3; amperometric i-t). As a proof of concept, selective detection of toxic Cr(vi) content in the tannery-waste water has been demonstrated with a recovery value ∼100%.

Recent Advances in Electrochemical Monitoring of Chromium

The extensive use of chromium by several industries conducts to the discharge of an immense quantity of its various forms in the environment which affects drastically the ecological and biological lives especially in the case of hexavalent chromium. Electrochemical sensors and biosensors are useful devices for chromium determination. In the last five years, several sensors based on the modification of electrode surface by different nanomaterials (fluorine tin oxide, titanium dioxide, carbon nanomaterials, metallic nanoparticles and nanocomposite) and biosensors with different biorecognition elements (microbial fuel cell, bacteria, enzyme, DNA) were employed for chromium monitoring. Herein, recent advances related to the use of electrochemical approaches for measurement of trivalent and hexavalent chromium from 2015 to 2020 are reported. A discussion of both chromium species detections and speciation studies is provided.

Semi-continuous Monitoring of Cr(VI) and Cr(III) during a Soil Extraction Process by Means of an Ion Transfer Device and Graphite Furnace Atomic Absorption Spectroscopy

Electrodialytic separation of Cr(VI) and Cr(III) followed by graphite furnace atomic absorption spectrometry for monitoring of soil extraction was studied. The sensitivity was improved by in-line purification of the solutions and bi-polar pulse cleaning. The detection limit for both Cr(VI) and Cr(III) was 0.01 μg L^-1. The system was successfully used to monitor the concentration change during soil extraction with dual solution line filtration. The results demonstrate the difference in concentration changes with the different sources of Cr(VI).