Low-temperature synthesis of NiS/MoS2/C nanowires/nanoflakes as electrocatalyst for hydrogen evolution reaction in alkaline medium via calcining/sulfurizing metal-organic frameworks

Coordination compound-derived La-doped FeS2/N-doped carbon (NC) as an efficient electrocatalyst for oxygen evolution reaction

By annealing/sulfuring of coordination compound (CC) precursors, [LaxFe1-x(H2O)8Fe(CN)6]·2hmt (x = 0, 0.33 and 0.5) (hmt = hexamethylenetetramine), it was synthesized FeS2/N-doped carbon (NC), La-doped FeS2/NC-0.33 and La-doped FeS2/NC-0.5. All of...

Fe-Triazole coordination compound-derived Fe2O3 nanoparticles anchored on Fe-MOF/N-doped carbon nanosheets for efficient electrocatalytic oxygen evolution reaction

Using FeCl₃·6H₂O and 1,2,4-triazole (Htrz) as starting materials, an Fe coordination compound (CC), [FeCl₃(Htrz)₃]·H₂O, was synthesized at room temperature. Fe-CC can be partially transformed into an Fe metal-organic framework (MOF), [FeCl₂(Htrz)], via low-temperature annealing. After sulfurization at 250, 300, and 400 °C, S-doped Fe₂O₃/N-doped carbon (denoted as NC)/Fe-MOF, FeS₂/NC/Fe-MOF, and FeS₂/NC were obtained, respectively. S-doped Fe₂O₃/NC/Fe-MOF shows the best oxygen evolution reaction (OER) catalytic activity in 1 M KOH solution, with overpotentials (η) of 185, 232, and 258 mV required to reach current densities of 10, 30, and 50 mA cm^-2, respectively, outperforming commercial RuO₂ and most transition-metal oxides reported to date; this high performance is associated with the Fe₂O₃ nanoparticles (NPs) anchored on the Fe-MOF/NC nanosheets. The Fe-MOF/NC matrix can act as a support to prevent the agglomeration of Fe₂O₃ NPs. In addition, S-doped Fe₂O₃/NC/Fe-MOF exhibits long-term OER activity at 20 mA cm^-2, which is related to the partial transformation of Fe₂O₃/Fe-MOF into FeOOH. In addition, density functional theory (DFT) calculations show that the rate-determining step of the OER process at the Fe sites of both Fe₂O₃ and FeS₂ is the formation of Fe*-OH, and the Fe₂O₃ sites display a lower Gibbs free energy (ΔG_max) of 1.674 eV and a smaller η value of ∼0.444 V. Bader charge, differential charge density mapping, and density of states (DOS) analysis all reveal more charge accumulation at the Fe sites of FeS₂ than at the Fe sites of Fe₂O₃, which is due to the lower electronegativity of S than of O. As a result, the Fe sites of FeS₂ show weaker affinity for -OH intermediates, giving rise to inferior OER performance compared with Fe₂O₃.

Assembly of Copolymer and Metal-Organic Framework HKUST-1 to Form Cu2-xS/CNFs Intertwining Network for Efficient Electrocatalytic Hydrogen Evolution

The construction of complex intertwined networks that provide fast transport pathways for ions/electrons is very important for electrochemical systems such as water splitting, but a challenge. Herein, a three dimensional (3-D) intertwined network of Cu2-xS/CNFs (x = 0 or 0.04) has been synthesized through the morphology-preserved thermal transformation of the intertwined PEG-b-P4VP/ HKUST-1 hybrid networks. The strong interaction between PEG chains and Cu2+ is the key to the successful assembly of PEG-b-P4VP nanofibers and HKUST-1, which inhibits the HKUST-1 to form individual crystalline particles. The obtained Cu2-xS/CNFs composites possess several merits, such as highly exposed active sites, high-speed electronic transmission pathways, open pore structure, etc. Therefore, the 3-D intertwined hierarchical network of Cu2-xS/CNFs displays an excellent electrocatalytic activity for HER, with a low overpotential (η) of 276 mV to reach current densities of 10 mA cm-2, and a smaller Tafel slope of 59 mV dec-1 in alkaline solution.

Earth-Abundant Electrocatalysts for Water Splitting: Current and Future Directions

Of all the available resources given to mankind, the sunlight is perhaps the most abundant renewable energy resource, providing more than enough energy on earth to satisfy all the needs of humanity for several hundred years. Therefore, it is transient and sporadic that poses issues with how the energy can be harvested and processed when the sun does not shine. Scientists assume that electro/photoelectrochemical devices used for water splitting into hydrogen and oxygen may have one solution to solve this hindrance. Water electrolysis-generated hydrogen is an optimal energy carrier to store these forms of energy on scalable levels because the energy density is high, and no air pollution or toxic gas is released into the environment after combustion. However, in order to adopt these devices for readily use, they have to be low-cost for manufacturing and operation. It is thus crucial to develop electrocatalysts for water splitting based on low-cost and land-rich elements. In this review, I will summarize current advances in the synthesis of low-cost earth-abundant electrocatalysts for overall water splitting, with a particular focus on how to be linked with photoelectrocatalytic water splitting devices. The major obstacles that persist in designing these devices. The potential future developments in the production of efficient electrocatalysts for water electrolysis are also described.

CuS nanoparticles decorated MoS2 sheets as an efficient nanozyme for selective detection and photocatalytic degradation of hydroquinone in water

Cost effective and efficient CuS–MoS₂ nanocomposite with enhanced peroxidase enzyme mimetics and photocatalytic activity was synthesized by simple hydrothermal method and successfully utilized for sensing and detection of toxic hydroquinone molecules in aqueous medium.

Direct solvent free synthesis of bare α-NiS, β-NiS and α-β-NiS composite as excellent electrocatalysts: Effect of self-capping on supercapacitance and overall water splitting activity

Nickel sulfide is regarded as a material with tremendous potential for energy storage and conversion applications. However, it exists in a variety of stable compositions and obtaining a pure phase is a challenge. This study demonstrates a potentially scalable, solvent free and phase selective synthesis of uncapped α-NiS, β-NiS and α-β-NiS composites using nickel alkyl (ethyl, octyl) xanthate precursors. Phase transformation and morphology were observed by powder-X-ray diffraction (p-XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The comparative efficiency of the synthesized samples was investigated for energy storage and generation applications, in which superior performance was observed for the NiS synthesized from the short chain xanthate complex. A high specific capacitance of 1,940 F/g, 2,150 F/g and 2,250 F/g was observed at 2 mV/s for bare α-NiS, β-NiS and α-β-NiS composite respectively. At high current density of 1 A/g, α-NiS showed the highest capacitance of 1,287 F/g, with 100% of Coulombic efficiency and 79% of capacitance retention. In the case of the oxygen evolution reaction (OER), β-NiS showed an overpotential of 139 mV at a current density of 10 mA/cm², with a Tafel slope of only 32 mV/dec, showing a fast and efficient process. It was observed that the increase in carbon chain of the synthesized self-capped nickel sulfide nanoparticles decreased the overall efficiency, both for energy storage and energy generation applications.

Vertically aligned MoS2 nanosheets on N-doped carbon nanotubes with NiFe alloy for overall water splitting

Schematic illustration of the formation process and performance of overall water splitting for NiFe-NCNT@MoS₂ samples.

F or V-induced activation of (Co, Ni)2P during electrocatalysis for efficient hydrogen evolution reaction

A series of (Co, Ni)₂P–xF and post-(Co, Ni)₂P–xF electrocatalysts with different compositions, morphologies and HER performances were synthesized. Among them, post-(Co, Ni)₂P–10F exhibits the best HER activity.

Recent Progresses in Electrocatalysts for Water Electrolysis

Abstract

The study of hydrogen evolution reaction and oxygen evolution reaction electrocatalysts for water electrolysis is a developing field in which noble metal-based materials are commonly used. However, the associated high cost and low abundance of noble metals limit their practical application. Non-noble metal catalysts, aside from being inexpensive, highly abundant and environmental friendly, can possess high electrical conductivity, good structural tunability and comparable electrocatalytic performances to state-of-the-art noble metals, particularly in alkaline media, making them desirable candidates to reduce or replace noble metals as promising electrocatalysts for water electrolysis. This article will review and provide an overview of the fundamental knowledge related to water electrolysis with a focus on the development and progress of non-noble metal-based electrocatalysts in alkaline, polymer exchange membrane and solid oxide electrolysis. A critical analysis of the various catalysts currently available is also provided with discussions on current challenges and future perspectives. In addition, to facilitate future research and development, several possible research directions to overcome these challenges are provided in this article.

Graphical Abstract