Nanocomposites CoPt-x/Diatomite-C as oxygen reversible electrocatalysts for zinc-air batteries: Diatomite boosted the catalytic activity and durability

Effect of carbon support on the activity of monodisperse Co45Pt55 nanoparticles for oxygen evolution in alkaline media

Oxygen evolution reaction (OER) represents the efficiency-limiting reaction in water electrolyzers, metal-air batteries, and unitized regenerative fuel cells. To achieve high-efficiency OER in alkaline media, we fabricated three novel electrocatalysts by the assembly of as-prepared Co45Pt55 alloy nanoparticles (NPs) on three different carbon-based support materials: reduced graphene oxide (CoPt/rGO), mesoporous graphitic carbon nitride (CoPt/mpg-CN), and commercial Ketjenblack carbon (CoPt/KB). Voltammetry studies revealed that CoPt/rGO electrocatalyst provided lower OER overpotentials accompanied by higher currents and specific current density values than the other two studied materials. Moreover, CoPt/rGO outperformed commercial CoPt/C electrocatalysts in terms of notably higher specific current densities. Additionally, it was found that CoPt/rGO electrocatalyst activity increases with increasing temperature up to 85°C, as suggested by the increase in the exchange current density. Electrochemical impedance spectroscopy studies of three electrocatalysts in OER revealed similar charge transfer resistance, although CoPt/rGO provided a higher current density. The main issue observed during long-term chronoamperometry and chronopotentiometry studies is the materials' instability under OER polarization conditions, which is still to be tackled in future work.

Pt/CeMnOx/Diatomite: A Highly Active Catalyst for the Oxidative Removal of Toluene and Ethyl Acetate

Pt nanoparticles and a CeMnOx composite were loaded on the surface of the natural diatomite material to generate the Pt/CeMnOx/diatomite using the redox precipitation and impregnation methods. The physicochemical properties of the catalysts were characterized by means of various techniques. The catalytic properties and resistance to H2O and SO2 of the catalysts were measured for the oxidation of typical volatile organic compounds (i.e., toluene and ethyl acetate). Among all of the as-prepared samples, Pt/CeMnOx/diatomite exhibited the highest catalytic activity: the temperatures (T90%) at a toluene or ethyl acetate conversion of 90% were 230 and 210 °C at a space velocity (SV) of 20,000 mL g−1 h−1, respectively, and the turnover frequency (TOFPt) at 220 °C was 1.04 μmol/(gcat s) for ethyl acetate oxidation and 1.56 μmol/(gcat s) for toluene oxidation. In particular, this sample showed a superior catalytic activity for ethyl acetate oxidation at low temperatures, with its T50% being 185 °C at SV = 20,000 mL g−1 h−1. In addition, the Pt/CeMnOx/diatomite sample possessed good sulfur dioxide resistance during the toluene oxidation process. In the presence of SO2, some of the SO2 molecules were adsorbed on diatomite, which protected the active sites from being poisoned by SO2 to a certain extent. The pathways of ethyl acetate and toluene oxidation over Pt/CeMnOx/diatomite or Pt/CeMnOx were as follows: The C–C and C–O bonds in ethyl acetate are first broken to form the CH3CH2O* and CH3CO* species or toluene is first oxidized to benzaldehyde and benzoic acid, and all of these intermediates are then converted to CO2 and H2O. This work can provide a strategy to develop efficient catalysts with high catalytic activity, durability, low cost, and easy availability under actual working conditions.

Platinum-Cobalt Nanowires for Efficient Alcohol Oxidation Electrocatalysis

The compositions and surface facets of platinum (Pt)-based electrocatalysts are of great significance for the development of direct alcohol fuel cells (DAFCs). We reported an approach for preparing ultrathin Pt_nCo_100-n nanowire (NW) catalysts with high activity. The Pt_nCo_100-n NW alloy catalysts synthesized by single-phase surfactant-free synthesis have adjustable compositions and (111) plane and strain lattices. X-ray diffraction (XRD) results indicate that the alloy composition can adjust the lattice shrinkage or expansion of Pt_nCo_100-n NWs. X-ray photoelectron spectroscopy (XPS) results show that the electron structure of Pt is changed by the alloying effect caused by electron modulation in the d band, and the chemical adsorption strength of Pt is decreased, thus the catalytic activity of Pt is increased. The experimental results show that the activity of Pt_nCo_100-n for the oxidation of methanol and ethanol is related to the exposed crystal surface, strain lattice and composition of catalysts. The Pt_nCo_100-n NWs exhibit stronger electrocatalytic performance for both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The dominant (111) plane Pt₅₃Co₄₇ exhibits the highest electrocatalytic activity in MOR, which is supported by the results of XPS. This discovery provides a new pathway to design high activity, stability nanocatalysts to enhance direct alcohol fuel cells.

Recent Advances in Nanoscale Based Electrocatalysts for Metal-Air Battery, Fuel Cell and Water-Splitting Applications: An Overview

Metal-air batteries and fuel cells are considered the most promising highly efficient energy storage systems because they possess long life cycles, high carbon monoxide (CO) tolerance, and low fuel crossover ability. The use of energy storage technology in the transport segment holds great promise for producing green and clean energy with lesser greenhouse gas (GHG) emissions. In recent years, nanoscale based electrocatalysts have shown remarkable electrocatalytic performance towards the construction of sustainable energy-related devices/applications, including fuel cells, metal-air battery and water-splitting processes. This review summarises the recent advancement in the development of nanoscale-based electrocatalysts and their energy-related electrocatalytic applications. Further, we focus on different synthetic approaches employed to fabricate the nanomaterial catalysts and also their size, shape and morphological related electrocatalytic performances. Following this, we discuss the catalytic reaction mechanism of the electrochemical energy generation process, which provides close insight to develop a more efficient catalyst. Moreover, we outline the future perspectives and challenges pertaining to the development of highly efficient nanoscale-based electrocatalysts for green energy storage technology.

Hollow Nanocages of NixCo1-xSe for Efficient Zinc-Air Batteries and Overall Water Splitting

Developing Earth-abundant, highly efficient, and anti-corrosion electrocatalysts to boost the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER) for the Zn-air battery (ZAB) and for overall water splitting is imperative. In this study, a novel process starting with Cu2O cubes was developed to fabricate hollow NixCo1-xSe nanocages as trifunctional electrocatalysts for the OER, ORR, and HER and a reasonable formation mechanism was proposed. The Ni0.2Co0.8Se nanocages exhibited higher OER activity than its counterparts with the low overpotential of 280 mV at 10 mA cm-2. It also outperformed the other samples in the HER test with a low overpotential of 73 mV at 10 mA cm-2. As an air-cathode of a self-assembled rechargeable ZAB, it exhibited good performance, such as an ultralong cycling lifetime of > 50 h, a high round-trip efficiency of 60.86%, and a high power density of 223.5 mW cm-2. For the application in self-made all-solid-state ZAB, it also demonstrated excellent performance with a power density of 41.03 mW cm-2 and an open-circuit voltage of 1.428 V. In addition, Ni0.2Co0.8Se nanocages had superior performance in a practical overall water splitting, in which only 1.592 V was needed to achieve a current density of 10 mA cm-2. These results show that hollow NixCo1-xSe nanocages with an optimized Ni-to-Co ratio are a promising cost-effective and high-efficiency electrocatalyst for ZABs and overall water splitting in alkaline solutions.