Preparation of a novel Fe2O3-MoS2-CdS ternary composite film and its photoelectrocatalytic performance

Progress in Promising Semiconductor Materials for Efficient Photoelectrocatalytic Hydrogen Production

Photoelectrocatalytic (PEC) water decomposition provides a promising method for converting solar energy into green hydrogen energy. Indeed, significant advances and improvements have been made in various fundamental aspects for cutting-edge applications, such as water splitting and hydrogen production. However, the fairly low PEC efficiency of water decomposition by a semiconductor photoelectrode and photocorrosion seriously restrict the practical application of photoelectrochemistry. In this review, the mechanisms of PEC water decomposition are first introduced to provide a solid understanding of the PEC process and ensure that this review is accessible to a wide range of readers. Afterwards, notable achievements to date are outlined, and unique approaches involving promising semiconductor materials for efficient PEC hydrogen production, including metal oxide, sulfide, and graphite-phase carbon nitride, are described. Finally, four strategies which can effectively improve the hydrogen production rate-morphological control, doping, heterojunction, and surface modification-are discussed.

Detection of L-cysteine in urine samples based on CdS/TiO2-modified extended-gate field-effect transistor photoelectrochemical sensor

A novel extended-gate field-effect transistor (FET) photoelectrochemical (EGFET PEC) sensor was designed for highly sensitive detection of L-cysteine (L-Cys). TiO2 was initially modified on the ITO electrode by the sol-gel dip-coating method and calcined to produce TiO2/ITO. Then, CdS was synthesized on the TiO2 surface by hydrothermal method to obtain the CdS-TiO2 heterojunction material. CdS/TiO2/ITO was connected to the gate of the FET to obtain an EGFET PEC sensor. Under the irradiation of a xenon lamp simulating visible light, the CdS/TiO2 heterojunction composite absorbs light energy to produce photogenerated electron-hole pairs, which have strong photocatalytic oxidation activity and oxidize L-Cys covalently identified by Cd(II) through CdS covalent. These pairs generate a photovoltage that controls the current between the source and the drain to detect L-Cys. Under the optimized experimental conditions, the optical drain current (ID) of the sensor exhibited a good linear relationship with the logarithm of L-Cys in the range of 5.0 × 10-9-1.0 × 10-6 mol/L, and the detection limit was 1.3 × 10-9 mol/L (S/N = 3), which is lower than the values reported by other detection methods. Results showed that the CdS/TiO2/ITO EGFET PEC sensor revealed high sensitivity and good selectivity. The sensor has been used to determine L-Cys in urine samples.

Defect-enriched (H2PO4-, Cr3+)-α-Fe2O3/β-In2S3 composites for visible light degradation of 4-nitrophenol

In this work, the high-activity (H₂PO₄^-, Cr³⁺)-α-Fe₂O₃ (PCF) with abundant oxygen vacancies (OVs) and the high specific area was obtained by co-adding H₂PO₄^- and Cr³⁺. Defect-enriched PCF/β-In₂S₃ composites were prepared by low-temperature hydrothermal processes. The prepared composites exhibited improved photocatalytic degradation of 4-nitrophenol under visible light irradiation.The SO bond between PCF and β-In₂S₃ promoted the formation of tight heterojunction composites and increased the OVs concentration. Under the synergistic effect of photo-Fenton, defects, and heterojunction, the PCF/β-In₂S₃ composites effectively promoted the separation of photogenerated carriers and accelerated the production of active substances (•OH, •O₂^-, ¹O₂, and h⁺), leading to the improvement of photocatalytic-Fenton degradation performance. This work provided a new strategy for the preparation of highly efficient photocatalysts.

Ferric iron reduction reaction electro-Fenton with gas diffusion device: A novel strategy for improvement of comprehensive efficiency in electro-Fenton

Applying the optimal 2-electron oxygen reduction reaction potential in electro-Fenton (2e^-ORR-EF) for degradation has become a common strategy because of the highest H₂O₂ generation rate in such condition. However, in 2e^-ORR-EF system, the Fe(III) ions crystallize on the surface of cathode and form a layer of film according to SEM, XPS, XRD and Mössbauer spectrum resulting in poor reaction rate of EF. Hence, we propose FRR-EF, which is operated by applying the optimal potential of ferric iron reduction reaction (FRR) rather than that of 2e^-ORR on cathode for EF. Gas diffusion device was also carried out to ensure the H₂O₂ generation rate. In this novel strategy, only - 0.1 V was applied on cathode. High H₂O₂ production rate (0.021 ± 0.002 mmol L^-1 min^-1 cm^-2), and slow Fe(II) consumption rate (0.03 min^-1) were achieved. The EIS result showed that at this potential, the formation of the Fe film was effectively alleviated, thus prolonging the degradation life of the cathode. This new strategy can balance both 2e^-ORR and FRR, thus improving the comprehensive efficiency of EF, which provides essential references to the EF not only in potential operation but also in the design of reaction device.

Ultrasonication-assisted liquid-phase exfoliation enhances photoelectrochemical performance in α-Fe2O3/MoS2 photoanode

This study successfully manufactured a p-n heterojunction hematite (α-Fe₂O₃) structure with molybdenum disulfide (MoS₂) to address the electron-hole transfer problems of conventional hematite to enhance photoelectrochemical (PEC) performance. The two-dimensional MoS₂ nanosheets were prepared through ultrasonication-assisted liquid-phase exfoliation, after which the concentration, number of layers, and thickness parameters of the MoS₂ nanosheets were respectively estimated by UV-vis, HRTEM and AFM analysis to be 0.37 mg/ml, 10-12 layers and around 6 nm. The effect of heterojunction α-Fe₂O₃/MoS₂ and the role of the ultrasonication process were investigated by the optimized concentration of MoS₂ in the forms of bulk and nanosheet on the surface of the α-Fe₂O₃ electrode while measuring the PEC performance. The best photocurrent density of the α-Fe₂O₃/MoS₂ photoanode was obtained at 1.52 and 0.86 mA.cm^-2 with good stability at 0.6 V vs. Ag/AgCl under 100 mW/cm² (AM 1.5) illumination from the back- and front-sides of α-Fe₂O₃/MoS₂; these values are 13.82 and 7.85-times higher than those of pure α-Fe₂O₃, respectively. The results of electrochemical impedance spectroscopy (EIS) and Mott-Schottky analysis showed increased donor concentration (2.6-fold) and decreased flat band potential (by 20%). Moreover, the results of IPCE, ABPE, and OCP analyses also supported the enhanced PEC performance of α-Fe₂O₃/MoS₂ through the formation of a p-n heterojunction, leading to a facile electron-hole transfer.

Fabrication of electrochemically-modified BiVO4-MoS2-Co3O4composite film for bisphenol A degradation

A new electrochemically-modified BiVO₄-MoS₂-Co₃O₄ (represented as E-BiVO₄-MoS₂-Co₃O₄) thin film electrode was successfully synthesized for environmental application. MoS₂ and Co₃O₄ were grown on the surface of BiVO₄ to obtain BiVO₄-MoS₂-Co₃O₄. E-BiVO₄-MoS₂-Co₃O₄ film was achieved by further electrochemical treatment of BiVO₄-MoS₂-Co₃O₄. The as-prepared E-BiVO₄-MoS₂-Co₃O₄ exhibited significantly enhanced photoelectrocatalytic activity. The photocurrent density of E-BiVO₄-MoS₂-Co₃O₄ thin film is 6.6 times that of BiVO₄ under visible light irradiation. The degradation efficiency of E-BiVO₄-MoS₂-Co₃O₄ for bisphenol A pollutant was 81.56% in photoelectrochemical process. The pseudo-first order reaction rate constant of E-BiVO₄-MoS₂-Co₃O₄ film is 3.22 times higher than that of BiVO₄. And its reaction rate constant in photoelectrocatalytic process is 14.5 times or 2 times that in photocatalytic or electrocatalytic process, respectively. The improved performance of E-BiVO₄-MoS₂-Co₃O₄ was attributed to the synergetic effects of the reduction of interfacial charge transfer resistance, the formation of oxygen vacancies and sub-stoichiometric metal oxides and higher separation efficiency of photogenerated electron-hole pairs. E-BiVO₄-MoS₂-Co₃O₄ is a promising composite material for pollutants removal.