Preparation of highly conductive biochar nanoparticles for rapid and sensitive detection of 17β-estradiol in water

Enhancing soil health, microbial count, and hydrophilic methomyl and hydrophobic lambda-cyhalothrin remediation with biochar and nano-biochar

Pesticide contamination and soil degradation present significant challenges in agricultural ecosystems, driving extensive exploration of biochar (BC) and nano-biochar (NBC) as potential solutions. This study examines their effects on soil properties, microbial communities, and the fate of two key pesticides: the hydrophilic methomyl (MET) and the hydrophobic lambda-cyhalothrin (LCT), at different concentrations (1%, 3%, and 5% w w-1) in agricultural soil. Through a carefully designed seven-week black bean pot experiment, the results indicated that the addition of BC/NBC significantly influenced soil dynamics. Soil pH and moisture content (MC) notably increased, accompanied by a general rise in soil organic carbon (SOC) content. However, in BC5/NBC5 treatments, SOC declined after the 2nd or 3rd week. Microbial populations, including total plate count (TPC), phosphate-solubilizing bacteria (PSB), and nitrogen-fixing bacteria (NFB), showed dynamic responses to BC/NBC applications. BC1/NBC1 and BC3/NBC3 applications led to a significant increase in microbial populations, whereas BC5/NBC5 treatments experienced a decline after the initial surge. Furthermore, the removal efficiency of both MET and LCT increased with higher BC/NBC concentrations, with NBC demonstrating greater efficacy than BC. Degradation kinetics, modeled by a first-order equation, revealed that MET degraded faster than LCT. These findings underscore the profound impact of BC/NBC on pesticide dynamics and microbial communities, highlighting their potential to transform sustainable agricultural practices.

Optimized preparation of Ni-Febm bimetallic particles by ball milling NiSO4 and iron powder for efficient removal of triclosan

The excessive usage and emissions of triclosan (TCS) pose a serious threat to aquatic environments. Iron-based bimetallic particles (Pd/Fe, Ni/Fe, and Cu/Fe, etc.) were widely used for the degradation of chlorophenol pollutants. This study proposed a novel synthesis method for the preparation of Ni/Fe bimetallic particles (Ni-Febm) by ball milling microscale zero valent iron ZVI (mZVI) and NiSO4. Ball-milling conditions such as ball-milling time, ball-milling speed and ball-to-powder ratio were optimized to prepare high activity Ni-Febm bimetallic particles. During the ball-milling process, Ni2+ was reduced to Ni0 and formed a coupled structure with ZVI. The amount of Ni0 on ZVI significantly affected the activity of Ni-Febm bimetallic particles. The highest activity Ni-Febm bimetallic particles with Ni/Fe ratio of 0.03 were synthesized under optimized conditions, which could remove 86.56% of TCS (10 μM) in aerobic aqueous solution within 60 min. In addition, higher particle dosage, lower pH condition and higher reaction temperature were more conducive for TCS degradation. The higher corrosion current and lower electron transfer impedance of Ni-Febm bimetallic particles were the main reasons for its high activity. The hydrogen atom (•H) on the surface of Ni-Febm bimetallic particles was mainly contributed to the removal of TCS, as reductive transformation products of TCS were detected by LC-TOF-MS. Notably, a small amount of oxidation products were discovered. The total dechlorination rate of TCS was calculated to be 39.67%. After eight reaction cycles, the residual Ni-Febm bimetallic particles could still degrade 28.34% of TCS within 6 h. Low Ni2+ leaching during reaction indicated that Ni-Febm bimetallic particles did not pose potential environmental risks. The prepared environmental-friendly Ni-Febm bimetallic particles with high activity have great potential in the degradation of other chlorinated organic compounds in wastewater.

Defective porphyrin-based metal-organic framework nanosheets derived from V2CTx MXene as a robust bioplatform for impedimetric aptasensing 17β-estradiol

An electrochemical aptasensor was prepared for the efficient, sensitive, and selective detection of 17β-estradiol. The sensor was based on a defective two-dimensional porphyrin-based metal-organic framework derived from V₂CT_x MXene. The resulting metal-organic framework nanosheets benefited from the advantages of V₂CT_x MXene nanosheets and porphyrin-based metal-organic framework, two-dimensional porphyrin-based metal-organic framework nanosheets demonstrated amplified electrochemical response and enhanced aptamer-immobilization ability compared with V₂CT_x MXene nanosheets. The sensor's detection limit was ultralow at 0.81 fg mL^-1 (2.97 fM), and the 17β-estradiol concentration range was wide, thereby outperforming most reported aptasensors. The high selectivity, superior stability and reproducibility, and excellent regeneration performance of the constructed aptasensor indicated its remarkable potential application for 17β-estradiol determination in diverse real samples. This aptasensing strategy can be used to analyze other targets by replacing the corresponding aptamer.

Nano-biochar: recent progress, challenges, and opportunities for sustainable environmental remediation

Biochar is a carbonaceous by-product of lignocellulosic biomass developed by various thermochemical processes. Biochar can be transformed into "nano-biochar" by size reduction to nano-meters level. Nano-biochar presents remarkable physico-chemical behavior in comparison to macro-biochar including; higher stability, unique nanostructure, higher catalytic ability, larger specific surface area, higher porosity, improved surface functionality, and surface active sites. Nano-biochar efficiently regulates the transport and absorption of vital micro-and macro-nutrients, in addition to toxic contaminants (heavy metals, pesticides, antibiotics). However an extensive understanding of the recent nano-biochar studies is essential for large scale implementations, including development, physico-chemical properties and targeted use. Nano-biochar toxicity on different organisms and its in-direct effect on humans is an important issue of concern and needs to be extensively evaluated for large scale applications. This review provides a detailed insight on nanobiochar research for (1) development methodologies, (2) compositions and properties, (3) characterization methods, (4) potentiality as emerging sorbent, photocatalyst, enzyme carrier for environmental application, and (5) environmental concerns.

Synergistic effect and mechanism of Cd(II) and As(III) adsorption by biochar supported sulfide nanoscale zero-valent iron

Biochar derived from bamboo was used to support sulfide nanoscale zero-valent iron (S-nZVI@BC) for simultaneous removal of Cd(II) and As (III) from aqueous media. Scanning electron microscopy (SEM) and X-ray diffraction spectroscopy (XRD) characterization confirmed the successful synthesis of the S-nZVI@BC. Adsorption kinetics and isotherms indicated that co-adsorption of Cd(II) and As(III) onto S-nZVI@BC was well represented by pseudo-second-order model (R²_Cd(II) = 0.990, R²_As(III) = 0.995) and Langmuir model (R²_Cd(II) = 0.954, R²_As(III) = 0.936). The maximum adsorption was 162.365 and 276.133 mg/g for Cd(II) and As(III), respectively, in a co-adsorption system, which was significantly higher than that in a single adsorption system (103.195 and 223.736 mg/g, respectively). Batch experiments showed that the Cd(II)-to-As(III) concentration ratio significantly affected the co-adsorption with the optimal ratio of 1:2. Ca²⁺ and Mg²⁺ significantly inhibited Cd(II) removal. In contrast, phosphate and humic acid significantly inhibited As(III) removal. Electrochemical analysis indicated S-nZVI@BC had a lower corrosion potential and resistance than nZVI@BC, making it more conducive to electron transfer and chemical reaction. Electrostatic adsorption, complexation, co-precipitation, and redox were the primary mechanisms for Cd(II) and As(III) removal. Overall, the present study provides new insights into the synergistic removal of Cd(II) and As(III) by S-nZVI@BC, which is a very promising adsorbent for the effective removal of Cd(II) and As(III) from contaminated wastewater.

Biochar: An environmentally friendly platform for construction of a SARS-CoV-2 electrochemical immunosensor

Waste management is a key feature to ensure sustainable consumption and production patterns, and to combat the impacts of climate change. In this scenario, the production of biochar from different biomasses results in environmental and economic advantages. In this study, biochar was produced from sugarcane bagasse pyrolysis, to immobilize biomolecules, in order to assemble an electrochemical immunosensor to detect antibodies against SARS-CoV-2. For this, screen-printed carbon electrodes (SPCE) were modified with a dispersion of biochar and used to immobilize the receptor-binding-domain (RBD) against virus S-protein, through EDC/NHS crosslinking reaction. Under the best set of experimental conditions, negative and positive serum samples responses distinguished based on a cutoff value of 82.3 %, at a 95 % confidence level. The immunosensor showed selective behavior to antibodies against yellow fever and its performance was stable up to 7 days of storage. Therefore, biochar yielded from sugarcane bagasse is an ecofriendly material that can be used as a platform to immobilize biomolecules for construction of electrochemical biosensors.

Advances on Hormones and Steroids Determination: A Review of Voltammetric Methods since 2000

This article presents advances in the electrochemical determination of hormones and steroids since 2000. A wide spectrum of techniques and working electrodes have been involved in the reported measurements in order to obtain the lowest possible limits of detection. The voltammetric and polarographic techniques, due to their sensitivity and easiness, could be used as alternatives to other, more complicated, analytical assays. Still, growing interest in designing a new construction of the working electrodes enables us to prepare new measurement procedures and obtain lower limits of detection. A brief description of the measured compounds has been presented, along with a comparison of the obtained results.

A Novel Activated Biochar-Based Immunosensor for Rapid Detection of E. coli O157:H7

E. coli O157:H7, one of the major foodborne pathogens, can cause a significant threat to the safety of foods. The aim of this research is to develop an activated biochar-based immunosensor that can rapidly detect E. coli O157:H7 cells without incubation in pure culture. Biochar was developed from corn stalks using proprietary reactors and then activated using steam-activation treatment. The developed activated biochar presented an enhanced surface area of 830.78 m²/g. To develop the biosensor, the gold electrode of the sensor was first coated with activated biochar and then functionalized with streptavidin as a linker and further immobilized with biotin-labeled anti-E. coli polyclonal antibodies (pAbs). The optimum concentration of activated biochar for sensor development was determined to be 20 mg/mL. Binding of anti-E. coli pAbs with E. coli O157:H7 resulted in a significant increase in impedance amplitude from 3.5 to 8.5 kΩ when compared to an only activated biochar-coated electrode. The developed immunosensor was able to detect E. coli O157:H7 cells with a limit of detection of 4 log CFU/mL without incubation. Successful binding of E. coli O157:H7 onto an activated biochar-based immunosensor was observed on the microelectrode surface in scanning electron microscopy (SEM) images.

Recent Advances of Biochar-Based Electrochemical Sensors and Biosensors

In the context of accelerating the global realization of carbon peaking and carbon neutralization, biochar produced from biomass feedstock via a pyrolysis process has been more and more focused on by people from various fields. Biochar is a carbon-rich material with good properties that could be used as a carrier, a catalyst, and an absorbent. Such properties have made biochar a good candidate as a base material in the fabrication of electrochemical sensors or biosensors, like carbon nanotube and graphene. However, the study of the applications of biochar in electrochemical sensing technology is just beginning; there are still many challenges to be conquered. In order to better carry out this research, we reviewed almost all of the recent papers published in the past 5 years on biochar-based electrochemical sensors and biosensors. This review is different from the previously published review papers, in which the types of biomass feedstock, the preparation methods, and the characteristics of biochar were mainly discussed. First, the role of biochar in the fabrication of electrochemical sensors and biosensors is summarized. Then, the analytes determined by means of biochar-based electrochemical sensors and biosensors are discussed. Finally, the perspectives and challenges in applying biochar in electrochemical sensors and biosensors are provided.

Carbon matrix of biochar from biomass modeling components facilitates electron transfer from zero-valent iron to Cr(VI)

Biochar-harbored zero-valent iron (ZVI/BC) has been extensively used to detoxify hexavalent chromium (Cr(VI)). However, the role played by biochar in promoting electron transfer of ZVI and Cr(VI) reduction was not fully uncovered. Herein, three biomass modeling components (cellulose, hemicellulose, and lignin) and their blends were utilized to synthesize ZVI/BC via co-pyrolysis with hematite. X-ray diffraction analysis showed that hematite was successfully reduced to ZVI in nitrogen ambience. Batch sorption experiment showed that mass ratio (hematite to lignocellulosic component) of 1:20 is most optimal for reduction of Cr(VI) by ZVI/BCs. ZVI supported by BC derived from cellulose, hemicellulose, and their binary mixture demonstrated better Cr(VI) removal capacity (23.8-38.3 mg g-1) owing to higher ordered and graphitic carbon structure as revealed by Raman spectrum. In addition, lower Tafel corrosion potentials and smaller electrochemical impedance arc radiuses were observed based on electrochemical analysis, suggesting their higher electrical conductivity and faster electron transfer, whereas the BCs derived from lignin and lignin-containing hybrids were not conducive to electron transfer of ZVI due to lower degree of graphitization, thus compromising Cr(VI) removal by ZVI/BC (7.7-17.7 mg g-1). As per X-ray photoelectron spectroscopy analysis, reduction, complexation, and co-precipitation were the main mechanisms for Cr(VI) removal. The present study provided a scientific evidence for screening plant-derived biomass feedstock with high contents of cellulose and hemicellulose and low lignin content to fabricate ZVI/BC to achieve high Cr(VI) removal.

A novel electrochemical sensor based on β-cyclodextrin functionalized carbon nanosheets@carbon nanotubes for sensitive detection of bactericide carbendazim in apple juice

Carbendazim (CBZ) abuse always causes the over-standard of pesticide residues in agricultural products, which has adverse effects on human health. Herein, a novel electrochemical sensor was firstly fabricated based on the β-cyclodextrin (β-CD) functionalized carbon nanosheets@carbon nanotubes (CNS@CNT) for the CBZ determination. CNS@CNT combined large surface area of CNS and excellent electrical conductivity of CNT, which significantly enhanced the electrocatalytic performance. Moreover, β-CD possessed excellent host-gest supramolecular recognition ability, which could improve the selective recognition and enrichment capability of CBZ. Thanks to the synergistic interaction of CNS@CNT and β-CD, the β-CD/CNS@CNT/GCE sensor exhibited a low limit of detection of 9.4 nM in the linear CBZ concentration range of 0.03-30 μM. The fabricated sensor presented favorable stability, high sensitivity (30.86 μA μM^-1 cm^-2), and reliable reproducibility (RSD = 3.6%). Especially, the β-CD/CNS@CNT/GCE sensor could show pretty practical feasibility for the detection of CBZ in apple juice with recoveries of 97.1%-99.4%.

Immunoassay technology: Research progress in microcystin-LR detection in water samples

Increasing global warming and eutrophication have led to frequent outbreaks of cyanobacteria blooms in freshwater. Cyanobacteria blooms cause the death of aquatic and terrestrial organisms and have attracted considerable attention since the 19th century. Microcystin-LR (MC-LR) is one of the most typical cyanobacterial toxins. Therefore, the fast, sensitive, and accurate determination of MC-LR plays an important role in the health of humans and animals. Immunoassay refers to a method that uses the principle of immunology to determine the content of the tested substance in a sample using the tested substance as an antigen or antibody. In analytical applications, the immunoassay technology could use the specific recognition of antibodies for MC-LR detection. In this review, we firstly highlight the immunoassay detection of MC-LR over the past two decades, including classical enzyme-link immunosorbent assay (ELISA), modern immunoassay with optical signal, and modern immunoassay with electrical signal. Among these detection methods, the water environment was used as the main detection system. The advantages and disadvantages of the different detection methods were compared and analyzed, and the principles and applications of immunoassays in water samples were elaborated. Furthermore, the current challenges and developmental trends in immunoassay were systematically introduced to enhance MC-LR detection performance, and some critical points were given to deal with current challenges. This review provides novel insight into MC-LR detection based on immunoassay method.

A state of the art overview of carbon-based composites applications for detecting and eliminating pharmaceuticals containing wastewater

The growing prevalence of new toxins in the environment continues to cause widespread concerns. Pharmaceuticals, organic pollutants, heavy metal ions, endocrine-disrupting substances, microorganisms, and others are examples of persistent organic chemicals whose effects are unknown because they have recently entered the environment and are displaying up in wastewater treatment facilities. Pharmaceutical pollutants in discharged wastewater have become a danger to animals, marine species, humans, and the environment. Although their presence in drinking water has generated significant concerns, little is known about their destiny and environmental effects. As a result, there is a rising need for selective, sensitive, quick, easy-to-handle, and low-cost early monitoring detection systems. This study aims to deliver an overview of a low-cost carbon-based composite to detect and remove pharmaceutical components from wastewater using the literature reviews and bibliometric analysis technique from 1970 to 2021 based on the web of science (WoS) database. Various pollutants in water and soil were reviewed, and different methods were introduced to detect pharmaceutical pollutants. The advantages and drawbacks of varying carbon-based materials for sensing and removing pharmaceutical wastes were also introduced. Finally, the available techniques for wastewater treatment, challenges and future perspectives on the recent progress were highlighted. The suggestions in this article will facilitate the development of novel on-site methods for removing emerging pollutants from pharmaceutical effluents and commercial enterprises.

Green synthesis of kudzu vine biochar decorated graphene-like MoSe2 with the oxidase-like activity as intelligent nanozyme sensing platform for hesperetin

It is an urgent need to exploit a potentially green, cost efficient and eco-friendly strategy for the utilization of waste kudzu vine. We developed a one-step green preparation of kudzu vine biochar (BC) decorated graphene-like molybdenum selenide (MoSe₂) with the oxidase-like activity as intelligent nanozyme sensing platform for voltametric detection of hesperetin (HP) in orange peel using the in-situ hydrothermal synthesis method. The structure and properties of MoSe₂-BC was characterized, and found that BC significantly improved electrochemical cycle stability, electronic conductivity, electrochemical active area, and electrocatalytic activity of MoSe₂. The oxidase-like activity of MoSe₂-BC was confirmed by the oxidization of the colorless substrate 3,3',5,5'-tetramethylbenzidine (TMB) to form blue products and the change of absorbance intensity of UV-vis absorption spectra. The MoSe₂-BC exhibited excellent electrochemical sensing performance for the detection of HP in wide linear ranges from 10 nM to 9.5 μM with a low limit of detection of 2 nM using differential pulse voltammetric method. An emerging machine learning technique is used to realize the intelligent sensing of HP, and the performance evaluation of regression analysis was selected to evaluate this technique. This work will provide a guidance for the preparation and application of biochar decorated graphene-like nanomaterials with the oxidase-like activity and the development of intelligent nanozyme sensing platform.

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Carbon-coated cadmium sulfide rose-like nanostructures (CdS@C NRs) were prepared via a facile solvothermal approach and used as the photoelectrochemical (PEC) sensing platform for the integration of functional biomolecules. Based on this, a novel "signal-off" PEC aptasensor mediated by enzymatic amplification was proposed for the sensitive and selective detection of 17β-estradiol (E2). In the presence of E2, alkaline phosphatase-modified aptamer (ALP-apta) were released from the electrode surface through the specific recognition with E2, which caused the negative effect on PEC response due to the decrease of ascorbic acid (AA) produced by the ALP in situ enzymatic catalysis. The developed PEC aptasensor for detection of E2 exhibited a wide linear range of 1.0-250 nM, with the low detection limit of 0.37 nM. This work provides novel insight into the design of potential phoelectroactive materials and the application of signal amplification strategy in environmental analysis field.

ZVI impregnation altered arsenic sorption by ordered mesoporous carbon in presence of Cr(Ⅵ): A mechanistic investigation

It is challenging to efficiently remove arsenate (As(Ⅴ)) and chromate (Cr(Ⅵ)) simultaneously. Herein, ordered mesoporous carbon (OMC) was fabricated with averaged pore diameter of 6.5 nm and surface area of 997 m² g^-1. Zerovalent iron (ZVI) impregnation reduced surface area of ZVI/OMC (432 m² g^-1) and increased I_D/I_G ratio by 13%. Maximal Cr(Ⅵ) and As(Ⅴ) sorption capacities at pH 3 were 0.66 and 0.019 mmol g^-1 by OMC, and 0.71 and 0.39 mmol g^-1 by ZVI/OMC, respectively. Reduction accounted for over 55% for Cr(Ⅵ) and As(Ⅴ) removal followed by complexation and precipitation. Better ZVI/OMC performance was ascribed to higher electron transfer rate and lower electrical resistance than OMC as per electrochemical analysis. Upon Cr(Ⅵ) introduction, As(Ⅴ) removal increased to 0.28 mmol g^-1 by OMC, but decreased to 0.16 mmol g^-1 by ZVI/OMC. OMC could preferably reduce CrO₄^2- to Cr³⁺ by hydroxyl group, which enhanced its zeta potential facilitating As(Ⅴ) sorption. Regarding ZVI/OMC, Fe⁰ and Fe oxide in ZVI/OMC exhibited better affinity to As(Ⅴ), but the competition for the similar active sites resulted in compromised As(Ⅴ) and Cr(Ⅵ) removal. Thus, the novel OMC is advantageous for removal of binary As(Ⅴ) and Cr(Ⅵ), but ZVI/OMC is robust to detoxify single heavy metal.

Co-transesterification of waste cooking oil, algal oil and dimethyl carbonate over sustainable nanoparticle catalysts

Key challenges for the application of biodiesel include their high acid value, high viscosity, and low ester content. It is essential to develop later-generation biodiesel from unexploited non-food resources for a more sustainable future. Reuse of biowaste is critically important to address these issues of food safety and sustainability. Thus, the co-transesterification of waste cooking oil (WCO), algal oil (AO) and dimethyl carbonate (DMC) for the synthesis of fatty acid methyl esters (FAMEs) was investigated over a series of nanoparticle catalysts containing calcium, magnesium, potassium or nickel under mild reaction conditions. Nanoparticle catalyst samples were prepared from biowaste sources of chicken manure (CM), water hyacinth (WH) and algal bloom (AB), and characterized using XRD, Raman and FESEM techniques for the heterogeneous production of biodiesel. The catalyst was initially prepared by calcination at 850 °C for 4 h in a major presence of Ca_xMg_yCO₃, KCl and K₂CO₃. The WCO and AO co-conversion of 98% and FAMEs co-selectivity of 95% were obtained over CM nanoparticle catalyst under the reaction conditions of 80 °C, 20 mins and DMC to oil molar ratio of 6:1 with 3% catalyst loading and 3% methanol addition. Under the optimum condition, the density, viscosity, and cetane number of the biodiesel were in the range of diesel standards. Nanoparticle catalysts have been proven as a promising sustainable material in the catalytic transesterification of WCO and AO with the major presence of calcium, magnesium and potassium. This study highlights a sustainable approach via biowaste utilization for the enhancement of biodiesel quality with high ester content, low acid value, high cetane number, and low viscosity.

Nanobiochar paper based electrochemical immunosensor for fast and ultrasensitive detection of microcystin-LR

A portable, cheap and sensitive paper type electrochemical immunosensor was developed with conductive nanobiochar paper as the conductive layer and utilized for sensitive detection of microcystin-LR (MCLR) toxin in water. The paper immunosensor was constructed by coating of highly conductive and dispersible nanobiochar particle (nBC) and anti-MCLR antibody on the filter paper via dipping-drying method. The presence of MCLR could be specifically quantified amperometrically by the nBC-paper immunosensor with the response time of less than 5 min, and the lowest detection limit of 17 pM (0.017 μg/L) was achieved. Moreover, the proposed immunosensor exhibited high selectivity, reproducibility and storage stability, and was also used for environmental water detection with satisfactory recovery. The successful fabrication of low cost and ubiquitous biochar based paper type electrochemical immunosensing system would have significant value for the development of highly cost-effective electrochemical device.

Preparation of highly-conductive pyrogenic carbon-supported zero-valent iron for enhanced Cr(Ⅵ) reduction

In this work, electron transfer (ET) moiety of PC was ascertained in chromate (Cr(Ⅵ)) reduction by zero-valent iron supported by pyrogenic carbon (PC) (ZVI/PC) prepared by pyrolysis of hematite (α-Fe₂O₃)-treated pinewood. X-ray diffraction analysis suggested successive phase transformation of α-Fe₂O₃→magnetite (Fe₃O₄)→wustite (FeO)→ZVI (Fe^o). Raman spectra and Brunauer-Emmett-Teller analysis revealed that ZVI/PC is characterized with more ordered graphitic carbon and greater surface area than pristine PC. Maximal Cr(Ⅵ) removal capacity (pH = 3) as predicted by Langmuir isotherm model were 5.78, 36.12 and 8.39 g kg^-1 for PC, ZVI/PC and ZVI, respectively. ZVI/PC maintained significantly greater Cr(Ⅵ) removal capacity than ZVI and PC at pH 3-9, but Cr(Ⅵ) removal dropped rapidly to 6.78 g kg^-1 at pH 4 and above. X-ray photoelectron spectroscopy and successive desorption of Cr-laden ZVI/PC and ZVI showed trivalent Cr was the dominant species, suggesting reduction was an important mechanism for Cr(Ⅵ) detoxification. Electrochemical analysis demonstrated that ZVI/PC exhibited greater Tafel corrosion rate and ET quantity, with lower electrical resistance. Besides, Cr(Ⅵ) reduction showed reversal trend with electrical resistance of ZVI/PC. To conclude, ET capacity was closely associated with electrical conductivity of ZVI/PC due to intensified conductive graphitic carbon structure of PC at higher pyrogenic temperatures.

Application of Nanostructured Carbon-Based Electrochemical (Bio)Sensors for Screening of Emerging Pharmaceutical Pollutants in Waters and Aquatic Species: A Review

Pharmaceuticals, as a contaminant of emergent concern, are being released uncontrollably into the environment potentially causing hazardous effects to aquatic ecosystems and consequently to human health. In the absence of well-established monitoring programs, one can only imagine the full extent of this problem and so there is an urgent need for the development of extremely sensitive, portable, and low-cost devices to perform analysis. Carbon-based nanomaterials are the most used nanostructures in (bio)sensors construction attributed to their facile and well-characterized production methods, commercial availability, reduced cost, high chemical stability, and low toxicity. However, most importantly, their relatively good conductivity enabling appropriate electron transfer rates-as well as their high surface area yielding attachment and extraordinary loading capacity for biomolecules-have been relevant and desirable features, justifying the key role that they have been playing, and will continue to play, in electrochemical (bio)sensor development. The present review outlines the contribution of carbon nanomaterials (carbon nanotubes, graphene, fullerene, carbon nanofibers, carbon black, carbon nanopowder, biochar nanoparticles, and graphite oxide), used alone or combined with other (nano)materials, to the field of environmental (bio)sensing, and more specifically, to pharmaceutical pollutants analysis in waters and aquatic species. The main trends of this field of research are also addressed.

Electrochemical Enzyme Biosensor Bearing Biochar Nanoparticle as Signal Enhancer for Bisphenol A Detection in Water

An electrochemical tyrosinase enzyme (Tyr) biosensor using a highly conductive sugarcane derived biochar nanoparticle (BCNP) as a transducer and signal enhancer (BCNPs/Tyr/Nafion/GCE) was developed for the sensitive detection of bisphenol A (BPA). The BCNPs/Tyr/Nafion/GCE biosensor exhibited improved amperometric current responses such as higher sensing signal, decreased impedance and lowered reduction potential compared with the Tyr/Nafion/GCE due to high conductivity property of the biochar nanoparticle. Under the optimized conditions, it could detect BPA in good sensitivity with linear range from 0.02 to 10 μM, and a lowest detection limit of 3.18 nM. Moreover, it showed a low K_m value, high reproducibility and good selectivity over other reagents, and the BCNPs/Tyr complex solution also showed good stability with 86.9% of sensing signal maintained after one month storage. The biosensor was also successfully utilized for real water detection with high accuracy as validated by high performance liquid chromatography. Therefore, the biochar nanoparticle based enzyme biosensor proved to be a potential and reliable method for high performance detection of pollutants in the environment.