Photoelectrocatalytic oxidation of As(III) over hematite photoanodes: A sensible indicator of the presence of highly reactive surface sites

Recent Progress in Photocatalytic Removal of Environmental Pollution Hazards in Water Using Nanostructured Materials

Water pollution has become a critical issue because of the Industrial Revolution, growing populations, extended droughts, and climate change. Therefore, advanced technologies for wastewater remediation are urgently needed. Water contaminants are generally classified as microorganisms and inorganic/organic pollutants. Inorganic pollutants are toxic and some of them are carcinogenic materials, such as cadmium, arsenic, chromium, cadmium, lead, and mercury. Organic pollutants are contained in various materials, including organic dyes, pesticides, personal care products, detergents, and industrial organic wastes. Nanostructured materials could be potential candidates for photocatalytic reduction and for photodegradation of organic pollutants in wastewater since they have unique physical, chemical, and optical properties. Enhanced photocatalytic performance of nanostructured semiconductors can be achieved using numerous techniques; nanostructured semiconductors can be doped with different species, transition metals, noble metals or nonmetals, or a luminescence agent. Furthermore, another technique to enhance the photocatalytic performance of nanostructured semiconductors is doping with materials that have a narrow band gap. Nanostructure modification, surface engineering, and heterojunction/homojunction production all take significant time and effort. In this review, I report on the synthesis and characterization of nanostructured materials, and we discuss the photocatalytic performance of these nanostructured materials in reducing environmental pollutants.

Photoactive Materials for Decomposition of Organic Matter Prior to Water Analysis—A Review Containing Original Research

Water plays a fundamental role in meeting the basic needs of society. Surface waters contain numerous organic pollutants, such as pesticides, drugs, and surfactants. The use of photolysis processes in organic matter degradation not only has practical applications in wastewater treatment but is also of major importance in the pretreatment of samples prior to the trace analysis of numerous analytes. The heterogeneous degradation is simple to implement prior to ultra-traces determination and is the only one allowed before the speciation analysis. Speciation analysis is currently the most important environmental challenge. The analysis of water, including tests associated with wastewater pretreatment and the monitoring of aqueous ecosystems, is the largest segment of environmental analysis. In the trace analysis of water, organic compounds are the principal interfering compounds reducing the quality of the obtained results or even preventing the determination of the examined analytes altogether. Some analytical techniques do not perform well in the presence, for example, of surfactants, so mineralization is sometimes required. Advanced oxidation processes are used to remove interfering organic compounds. The oxidation can be performed using homogenous photolysis (UV mineralization with hydrogen peroxide addition), while heterogenous photolysis using semiconductors helps to increase the removal efficiency of interferents dissolved in water. Utilizing semiconductor nanostructured materials as photocatalysts has been shown to be effective for the adequate removal of a wide spectrum of pollutants in water. Several semiconductor systems are used in the degradation of organic compounds, e.g., TiO2, Fe3O4, WO3, Fe2O3, ZnO, and mixtures of these oxides enriched with various precious metals, such as silver or gold. It is very challenging to manage the selectivity and reduction power so that organic compounds can be degraded but without disturbing the speciation of As, Cr, or Tl. Chemical modification of samples and the selection of semiconductor layers, light wavelength, and pH allow for the targeted degradation of specific compounds but may also indirectly affect the analysis of water samples. This review is a presentation of the state of the art of photocatalysis as a simple and effective technique for sample pretreatment in ultra-trace and speciation analysis and its critical as well as unpublished data related to this topic.

Solar-driven photoelectrocatalytic degradation of anticancer drugs using TiO2 nanotubes decorated with SnS quantum dots

In recent years, the growing interest in applying photoelectrocatalysis (PEC) to decompose organic pollutants has resulted in the need to search for new photoelectrode materials with high activity under visible light radiation. The presented research showed an increased photoelectrocatalytic activity under sunlight of Ti/TiO₂ sensitized with SnS quantum dots, obtained by the successive ionic layer adsorption and reaction (SILAR) method. The presence of SnS caused the enhanced absorption of visible irradiation and the reduction of recombination of generated charges by a p-n heterojunction created with the TiO₂. The highest efficiency of photoelectrocatalytic degradation of anticancer drugs (ifosfamide, 5-fluorouracil, imatinib) was achieved for the SnS-Ti/TiO₂ photoelectrode with a SnS quantum dot size from 4 to 10 nm. In addition, a decrease of IF PEC degradation efficiency was observed with increasing pH and with the presence of Cl^-, NO₃^-, HCO₃^- and organic matter in the treated solution. Studies of the PEC mechanism have shown that drug degradation occurs mainly as a result of the direct and indirect action of photogenerated holes on the SnS-Ti/TiO₂ photoelectrode, and the identified degradation products allowed for the presentation of the degradation pathway of IF, 5-FU and IMB. Duckweed (Lemna minor) growth inhibition tests showed no toxicity of the drug solutions after treatment.

Biochar Nanoparticles over TiO2 Nanotube Arrays: A Green Co-Catalyst to Boost the Photocatalytic Degradation of Organic Pollutants

Biochar nanoparticles (BC NPs), produced by low temperature pyrolysis (350 °C) of microalgae (Nannochloropsis sp.) and nutshells, are proposed as low-cost and sustainable co-catalysts to promote the photocatalytic activity of TiO2 nanotube (NT) arrays towards the degradation of methylene blue (MB) used as an organic pollutant model molecule. BC NPs (size < 25 nm) were obtained by treating bulk BC (i.e., biomass after pyrolysis) by sonication–centrifugation cycles in a water solution. The filtered BC NPs dispersion was deposited by simple drop-casting on the TiO2 NT support. The BC loading was varied by performing multiple depositions. Photocatalytic experiments under UV light (365 nm) revealed that the decoration with BC NPs significantly improves the TiO2 photoactivity. Such enhancement is mainly influenced by the amount of BC deposited; upon optimizing the BC deposition conditions, the rate of photocatalytic degradation of MB increases approximately three times with respect to bare TiO2, almost irrespective of the nature of the raw material. The greater photocatalytic activity of BC-TiO2 can be attributed to the synergistic combination of reactant/product adsorption and catalytic degradation of the adsorbed organic pollutant, as well as an improved charge carrier separation and electron transfer.

Quantitative Determination of the Surface Distribution of Supported Metal Nanoparticles: A Laser Ablation–ICP–MS Based Approach

A laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) based method is proposed for the quantitative determination of the spatial distribution of metal nanoparticles (NPs) supported on planar substrates. The surface is sampled using tailored ablation patterns and the data are used to define three-dimensional functions describing the spatial distribution of NPs. The volume integrals of such interpolated surfaces are calibrated to obtain the mass distribution of Ag NPs by correlation with the total mass of metal as determined by metal extraction and ICP–MS analysis. Once this mass calibration is carried out on a sacrificial sample, quantifications can be performed over multiple samples by a simple micro-destructive LA–ICP–MS analysis without requiring the extraction/dissolution of metal NPs. The proposed approach is here tested using a model sample consisting of a low-density polyethylene (LDPE) disk decorated with silver NPs, achieving high spatial resolution over cm2-sized samples and very high sensitivity. The developed method is accordingly a useful analytical tool for applications requiring both the total mass and the spatial distribution of metal NPs to be determined without damaging the sample surface (e.g., composite functional materials and NPs, decorated catalysts or electrodic materials).

Hydrothermal Synthesis of FeOOH and Fe2O3 Modified Self-Organizing Immobilized TiO2 Nanotubes for Photocatalytic Degradation of 1H-Benzotriazole

In this study, titanium dioxide nanotubes were prepared by electrochemical anodization technique and modified with an aqueous solution of FeCl3 using hydrothermal synthesis method to control the amount and distribution of iron compounds on the anatase TiO2 nanotubes. The objective was to synthesize immobilized FeOOH@TiO2 or Fe2O3@TiO2 photocatalysts designed for the flow-through reactor systems; to investigate thermal treatment effect on the photocatalytic efficiency; to determine appropriate Fe-compounds concentration for the maximum photocatalytic activity improvement, and to explain the mechanism responsible for the enhancement. The photocatalysts were tested for the degradation of 1H-benzotriazole in water under UV/solar light irradiation. Up to two times increase in the photocatalytic activity was obtained when TiO2 nanotubes were modified with 0.8 mM Fe. At higher Fe concentrations (8 mM and 80 mM), the photocatalytic activity of the given photocatalysts decreased. To confirm the formation of FeOOH or Fe2O3 species, and to clarify the mechanism of photoactivity, X-ray diffraction (XRD), Raman spectroscopy (RS), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDS) and UV-Vis spectroscopy were used.

Introducing Frontal Chromatography-Inductively Coupled Plasma-Mass Spectrometry as a Fast Method for Speciation Analysis: The Case of Inorganic Arsenic

A frontal chromatography-ICP-MS method (FC-ICP-MS) is proposed as an innovative approach for fast elemental speciation analysis: inorganic arsenic speciation was selected as the first case study to prove the feasibility of the technique and to explore its potentialities and limits. The principal benefits of the FC-ICP-MS approach are the short analysis time and the very simple instrumental setup. As(III) and As(V) front separation is performed over a strong anion exchanger at pH 7.5. After the optimization of the instrumental setup and the frontal chromatographic parameters, As(III) and As(V) concentrations up to 240 μg/kg can be determined within 120-140 s using different univariate and multivariate calibration approaches. Best results in terms of accuracy in prediction were obtained using the partial least squares (PLS) calibration achieving limits of detection of 0.18 and 0.21 μg/kg for As(III) and As(V), respectively. This approach was also used to establish the figures of merit of the method. The proved feasibility and good performances (in terms of analysis time and accuracy) of this technique lay the groundwork for future applications of FC-ICP-MS for the speciation of other elements.