Dynamic electrochemical impedance study of methanol oxidation at Pt at elevated temperatures

Electrochemical Studies of Stainless Steel and Stainless Steel-TiO2 Composite in Reference to Molten Aluminum Alloy Using a Solid-State BaCO3 Electrolyte

The influence of TiO₂ addition on the high-temperature electrochemical characteristics of stainless-steel-based materials was investigated by means of differential potential measurement, electrochemical polarization and impedance spectroscopy. A new three-electrode approach was utilized which incorporated a liquid aluminum alloy AlSi7Mg0.3 as the reference electrode, barium carbonate BaCO₃ as the solid-state electrolyte, and stainless steel or a stainless steel-TiO₂ composite as the working electrode. The potential differences between the steel-based working electrodes and the liquid-aluminum-alloy reference electrode were measured for 85 h throughout the whole experiment, including the heating and cooling period. The experiments were performed at 850 °C. The determination of the high-temperature open circuit potential (E_Corr) in reference to the liquid aluminum alloy was carried out via potentiodynamic polarization. The polarization-related changes in the impedance characteristics were evaluated by the correlation of impedance responses before and after the polarization. The addition of 40 vol% TiO₂ resulted in a reduction in the potential of the steel-TiO₂ composite and led to the formation of a more uniform electrode-electrolyte interface. The reaction products on the surface of the working electrodes were investigated by means of SEM/EDS and XRD. They consisted of mixed oxides within the Fe-O, Ba-Fe-O and Ba-Cr-O systems.

Statistical Analysis of the Measurement Noise in Dynamic Impedance Spectra

Different strategies can be used to acquire dynamic impedance spectra during a cyclic voltammetry experiment. The spectra are then analyzed by fitting them with a model using a weighted non-linear least-squares minimization algorithm. The choice of the weighting factors is not trivial and influences the value of the extracted parameters. At variance with the classic electrochemical impedance spectroscopy, dynamic impedance measurements are performed under non-stationary conditions, making them typically more prone to errors arising from the voltage and current analog-to-digital conversion. Under the assumption that the noise in the voltage and current signals have a constant variance along the measurement and that it is uncorrelated between distinct samples, we calculate an expression for the expected variance of the error of the resulting immittances, which considers the specific procedure used to extract the spectra under the time-varying nature of the measurements. The calculated variance of the error is then used as a rigorous way to evaluate the weighting factors of the least-squares minimization, assuming that the fitted model is ideally exact and that there are no systematic errors. By exploring two classical electrochemical systems and fitting the measured spectra with a transfer function measurement model, namely with the Padé approximants, we show that the variance evaluated with our method captures the frequency dependence of the resulting residuals and can be used for reliably performing the complex non-linear least-squares fitting procedure.

Effect of Sintering Temperature on Adhesion Property and Electrochemical Activity of Pt/YSZ Electrode

The (Pt/YSZ)/YSZ sensor unit is the basic component of the NO_x sensor, which can detect the emission of nitrogen oxides in exhaust fumes and optimize the fuel combustion process. In this work, the effect of sintering temperature on adhesion property and electrochemical activity of Pt/YSZ electrode was investigated. Pt/YSZ electrodes were prepared at different sintering temperatures. The microstructure of the Pt/YSZ electrodes, as well as the interface between Pt/YSZ electrode and YSZ electrolyte, were observed by SEM. Chronoamperometry, linear scan voltammetry, and AC impedance were tested by the electrochemical workstation. The results show that increasing the sintering temperature (≤1500 °C) helped to improve adhesion property and electrochemical activity of the Pt/YSZ electrode, which benefited from the formation of the porous structure of the Pt/YSZ electrode. For the (Pt/YSZ) electrode/YSZ electrolyte system, O²⁻ in YSZ is converted into chemisorbed O₂ on Pt/YSZ, which is desorbed into the gas phase in the form of molecular oxygen; this process could be the rate-controlling step of the anodic reaction. Increasing the sintering temperature (≤1500 °C) could reduce the reaction activation energy of the Pt/YSZ electrode. The activation energy reaches the minimum value (1.02 eV) when the sintering temperature is 1500 °C.

Rational incorporation of defects within metal-organic frameworks generates highly active electrocatalytic sites

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control. An emerging strategy to generate coordinatively-unsaturated active sites is through the use of organic linkers that lack a functional group that would usually bind with the metal nodes. To execute this strategy, we synthesize a model MOF, Ni-MOF-74 and incorporate a fraction of 2-hydroxyterephthalic acid in place of 2,5-dihydroxyterephthalic acid. The defective MOF, Ni-MOF-74D, is evaluated vs. the nominally defect-free Ni-MOF-74 with a host of ex situ and in situ spectroscopic and electroanalytical techniques, using the oxidation of hydroxymethylfurtural (HMF) as a model reaction. The data indicates that Ni-MOF-74D features a set of 4-coordinate Ni–O₄ sites that exhibit unique vibrational signatures, redox potentials, binding motifs to HMF, and consequently superior electrocatalytic activity relative to the original Ni-MOF-74 MOF, being able to convert HMF to the desired 2,5-furandicarboxylic acid at 95% yield and 80% faradaic efficiency. Furthermore, having such rationally well-defined catalytic sites coupled with in situ Raman and infrared spectroelectrochemical measurements enabled the deduction of the reaction mechanism in which co-adsorbed *OH functions as a proton acceptor in the alcohol oxidation step and carries implications for catalyst design for heterogeneous electrosynthetic reactions en route to the electrification of the chemical industry.

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control.

Platinum-Based Electrocatalysts for Direct Alcohol Fuel Cells: Enhanced Performances toward Alcohol Oxidation Reactions

In the past few decades, Pt-based electrocatalysts have attracted great interests due to their high catalytic performances toward the direct alcohol fuel cell (DAFC). However, the high cost, poor stability, and the scarcity of Pt have markedly hindered their large-scale utilization in commerce. Therefore, enhancing the activity and durability of Pt-based electrocatalysts, reducing the Pt amount and thus the cost of DAFC have become the keys for their practical applications. In this minireview, we summarized some basic concepts to evaluate the catalytic performances in electrocatalytic alcohol oxidation reaction (AOR) including electrochemical active surface area, activity and stability, the effective approaches for boosting the catalytic AOR performance involving size decrease, structure and morphology modulation, composition effect, catalyst supports, and assistance under other external energies. Furthermore, we also presented the remaining challenges of the Pt-based electrocatalysts to achieve the fabrication of a real DAFC.

High performance Pt/Ti3O5Mo0.2Si0.4 electrocatalyst with outstanding methanol oxidation activity

The strong metal–support interaction in Pt/Ti₃O₅Mo_0.2Si_0.4 enhances the methanol oxidation activity by decreasing the charge transfer resistance and activation energy.

Nanohybrid layered double hydroxide materials as efficient catalysts for methanol electrooxidation

In this work, efficient methanol oxidation fuel cell catalysts with excellent stability in alkaline media have been synthesized by including transition metals to the layered double hydroxide (LDH) nanohybrids. The nanohybrids CoCr-LDH, NiCoCr-LDH and NiCr-LDH were prepared by co-precipitation and their physicochemical characteristics were investigated using TEM, XRD, IR and BET analyses. The nanohybrid CoCr-LDH is found to have the highest surface area of 179.87 m² g⁻¹. The electrocatalytic activity measurements showed that the current density was increased by increasing the methanol concentration (from 0.1 to 3 M) as a result of its increased oxidation at the surface. The nanohybrid NiCr-LDH, showing the highest pore size (55.5 Å) showed the highest performance for methanol oxidation, with a current density of 7.02 mA cm⁻² at 60 mV s⁻¹ using 3 M methanol. In addition, the corresponding onset potential was 0.35 V (at 60 mV s⁻¹ using 3 M methanol) which is the lowest value among all other used LDH nanohybrids. Overall, we observed the following reactivity order: NiCr-LDH > NiCoCr-LDH > CoCr-LDH, as derived from the impedance spectroscopy analysis.

Methanol electrooxidation over layered double hydroxides.