Morphology-controllable preparation of NiFe2O4 as high performance electrode material for supercapacitor

Synthesis of surfactant-assisted nickel ferrite nanoparticles (NFNPs@surfactant) to amplify their application as an advanced electrode material for high-performance supercapacitors

Nickel ferrite nanoparticles (NFNPs) were synthesized in an alkaline medium (pH ∼ 11) using a wet chemical co-precipitation technique. To probe the effect of surfactants on the surface morphology, particle size and size distribution of nanoparticles; two surfactants, namely, cetyl trimethyl ammonium bromide (CTAB) and sodium dodecyl sulphate (SDS), were applied. The native and surfactant-assisted nickel ferrite NPs were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), dynamic light scattering (DLS) and transmission electron microscopy (TEM). The addition of surfactants (CTAB/SDS) effectively controlled the secondary growth of nickel ferrite particles and reduced their size, as examined by XRD, AFM, DLS, SEM and TEM. Characterization technique results affirmed that CTAB is a more optimistic surfactant to control the clustering, dispersion and particle size (∼22 nm) of NFNPs. To identify the impact of ferrite particle size on charge storage devices, their electrochemical properties were studied by using cyclic voltammetry (CV), galvanic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS) in 1 M KOH electrolyte through three-electrode assembly. NiFe2O4@CTAB showed a specific capacity of 267.1 C g-1, specific capacitance of 593.6 F g-1 and energy density of 16.69 W h kg-1, which was far better than the performances of other synthesized native NFNPs and NiFe2O4@SDS having larger surface areas.

Enhanced photocatalytic degradation of crystal violet dye and high-performance electrochemical supercapacitor applications of hydrothermally synthesised magnetic bifunctional nanocomposite (Fe3O4/ZnO)

The present investigation employed a facile hydrothermal approach for the fabrication of Fe3O4/ZnO dual-functional magnetic nanocomposite. Supercapacitor and visible-light-driven photocatalytic applications of the material were explored. X-ray diffraction, Fourier transform infrared spectra, ultraviolet-visible diffuse reflectance spectra (UV-vis/DRS), field emission scanning electron microscopy (FE-SEM), energy dispersive x-ray spectroscopy, and vibrating sample magnetometer were used to analyse the nanocomposite's structural, morphological, optical, and magnetic properties. The FE-SEM analysis demonstrated that the surface morphology of Fe3O4, ZnO, and the Fe3O4/ZnO nanocomposite consisted of nanoparticles, nanoflakes, and nanoparticles adhered to the nanoflakes, respectively. The maximum specific capacitance of the electrode based on the Fe3O4/ZnO nanocomposite was measured to be 736.36 Fg-1at a scan rate of 5 mVs-1. The electrode also demonstrated remarkable cycling stability, retaining 86.5% of its capacitance even after 3000 cycles. The Fe3O4/ZnO nanocomposite was found to have an optical bandgap of 2.7 eV, an average particle size of 22.5 nm, and a saturation magnetization of 68.7 emu g-1. The photocatalysis experiment was conducted using the optimised settings, which included a pH of 7.0, a dye concentration of 30 mg l-1, a catalyst dose of 1 g l-1, and a contact time of 120 min. The Fe3O4/ZnO nanocomposite exhibited a notable degradation efficiency towards crystal violet dye upon exposure to visible light, achieving a degradation efficiency of 96.9%. This performance surpassed that of pure ZnO, which attained a degradation efficiency of 70.2%. The nanocomposite exhibited a rate constant of 2.80 × 10-2min-1, which was found to be notably higher than that of pure ZnO (0.8 × 10-2min-1), as determined through modelling (pseudo-first order linear fit). The radical scavenger experiments indicated that the superoxide radicals and hydroxyl radicals are the primary reactive species. The Fe3O4/ZnO photocatalyst can be effectively isolated using a bar magnet. Remarkably, the photocatalytic efficiency of the material remained almost entirely intact even after undergoing four cycles of recycling. In addition, this research opens up exciting new possibilities for use in fields like energy storage and pollution control.

Investigations of Structural, Magnetic, and Electrochemical Properties of NiFe2O4 Nanoparticles as Electrode Materials for Supercapacitor Applications

Magnetic nanoparticles of NiFe₂O₄ were successfully prepared by utilizing the sol-gel techniques. The prepared samples were investigated through various techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), dielectric spectroscopy, DC magnetization and electrochemical measurements. XRD data analysed using Rietveld refinement procedure inferred that NiFe₂O₄ nanoparticles displayed a single-phase nature with face-centred cubic crystallinity with space group Fd-3m. Average crystallite size estimated using the XRD patterns was observed to be ~10 nm. The ring pattern observed in the selected area electron diffraction pattern (SAED) also confirmed the single-phase formation in NiFe₂O₄ nanoparticles. TEM micrographs confirmed the uniformly distributed nanoparticles with spherical shape and an average particle size of 9.7 nm. Raman spectroscopy showed characteristic bands corresponding to NiFe₂O₄ with a shift of the A_1g mode, which may be due to possible development of oxygen vacancies. Dielectric constant, measured at different temperatures, increased with temperature and decreased with increase in frequency at all temperatures. The Havrilliak-Negami model used to study the dielectric spectroscopy indicated that a NiFe₂O₄ nanoparticles display non-Debye type relaxation. Jonscher's power law was utilized for the calculation of the exponent and DC conductivity. The exponent values clearly demonstrated the non-ohmic behaviour of NiFe₂O₄ nanoparticles. The dielectric constant of the nanoparticles was found to be >300, showing a normal dispersive behaviour. AC conductivity showed an increase with the rise in temperature with the highest value of 3.4 × 10^-9 S/cm at 323 K. The M-H curves revealed the ferromagnetic behaviour of a NiFe₂O₄ nanoparticle. The ZFC and FC studies suggested a blocking temperature of ~64 K. The saturation of magnetization determined using the law of approach to saturation was ~61.4 emu/g at 10 K, corresponding to the magnetic anisotropy ~2.9 × 10⁴ erg/cm³. Electrochemical studies showed that a specific capacitance of ~600 F g^-1 was observed from the cyclic voltammetry and galvanostatic charge-discharge, which suggested its utilization as a potential electrode for supercapacitor applications.

Dealloyed Porous NiFe2O4/NiO with Dual-Network Structure as High-Performance Anodes for Lithium-Ion Batteries

As high-capacity anode materials, spinel NiFe₂O₄ aroused extensive attention due to its natural abundance and safe working voltage. For widespread commercialization, some drawbacks, such as rapid capacity fading and poor reversibility due to large volume variation and inferior conductivity, urgently require amelioration. In this work, NiFe₂O₄/NiO composites with a dual-network structure were fabricated by a simple dealloying method. Benefiting from the dual-network structure and composed of nanosheet networks and ligament-pore networks, this material provides sufficient space for volume expansion and is able to boost the rapid transfer of electrons and Li ions. As a result, the material exhibits excellent electrochemical performance, retaining 756.9 mAh g^-1 at 200 mA g^-1 after cycling for 100 cycles and retaining 641.1 mAh g^-1 after 1000 cycles at 500 mA g^-1. This work provides a facile way to prepare a novel dual-network structured spinel oxide material, which can promote the development of oxide anodes and also dealloying techniques in broad fields.

Enhancement of Magnetic and Dielectric Properties of Ni0.25Cu0.25Zn0.50Fe2O4 Magnetic Nanoparticles through Non-Thermal Microwave Plasma Treatment for High-Frequency and Energy Storage Applications

Spinel ferrites are widely investigated for their widespread applications in high-frequency and energy storage devices. This work focuses on enhancing the magnetic and dielectric properties of Ni_0.25Cu_0.25Zn_0.50 ferrite series through non-thermal microwave plasma exposure under low-pressure conditions. A series of Ni_0.25Cu_0.25Zn_0.50 ferrites was produced using a facile sol-gel auto-ignition approach. The post-synthesis plasma treatment was given in a low-pressure chamber by sustaining oxygen plasma with a microwave source. The structural formation of control and plasma-modified ferrites was investigated through X-ray diffraction analysis, which confirmed the formation of the fcc cubical structure of all samples. The plasma treatment did not affect crystallize size but significantly altered the surface porosity. The surface porosity increased after plasma treatment and average crystallite size was measured as about ~49.13 nm. Morphological studies confirmed changes in surface morphology and reduction in particle size on plasma exposure. The saturation magnetization of plasma-exposed ferrites was roughly 65% higher than the control. The saturation magnetization, remnant magnetization, and coercivity of plasma-exposed ferrites were calculated as 74.46 emu/g, 26.35 emu/g, and 1040 Oe, respectively. Dielectric characteristics revealed a better response of plasma-exposed ferrites to electromagnetic waves than control. These findings suggest that the plasma-exposed ferrites are good candidates for constructing high-frequency devices.

Surface chemistry considerations of gangue dissolved species in the bastnaesite flotation system

Inefficient flotation of bastnaesite remains a challenge in the production of rare earth elements. This study aimed to investigate the dissolution and adsorption behaviour of species that are commonly released into bastnaesite flotation pulp from Ca/Ba-bearing gangue minerals. The influence and corresponding mechanisms on the bastnaesite mineral surface and collectors, namely sodium oleate (NaOL), were evaluated experimentally based on micro-flotation, zeta potentials, in situ attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and X-Ray photoelectron spectroscopy (XPS) analyses. The flotation recovery of bastnaesite significantly decreased from ∼95% to ∼25%, ∼15%, ∼80%, ∼25% when exposed to calcite, fluorite, barite, and mixed dissolved species, respectively. The zeta potential of bastnaesite was pH sensitive, indicating that H+ and OH- determine the surface potential of bastnaesite. Solution chemistry analyses revealed that the presence of the dissolved species differed at various pH values. In situ ATR-FTIR demonstrated the different effects of the dissolved species from calcite, fluorite, and barite on collector adsorption. The former two dissolved species mainly depressed the chemisorption of the NaOL monomers (RCOO‒), whereas calcite also affected the physical adsorption of the oleic acid molecular dimer (RCOOH·RCOO‒). Moreover, the barite dissolved species only affected the physical adsorption of the NaOL species. The results of XPS analysis revealed that dissolved species from these three gangues could pre-adsorbed onto bastnaesite and affected the interaction with the collector. Density functional theory calculations were employed to provide further theoretical insights into the interactions between the dissolved species from calcite, fluorite, and barite and NaOL.

Construction of nickel ferrite nanoparticle-loaded on carboxymethyl cellulose-derived porous carbon for efficient pseudocapacitive energy storage

The preparation of biomass-derived carbon electrode materials with abundant active sites is suitable for development of energy-storage systems with high energy and power densities. Herein, a hybrid material consisting of highly-dispersed nickel ferrite nanoparticle on 3D hierarchical carboxymethyl cellulose-derived porous carbon (NiFe₂O₄/CPC) was prepared by simple annealing treatment. The synergistic effects of NiFe₂O₄ species with multiple oxidation states and 3D porous carbon with a large specific surface area offered abundant active centers, fast electron/ion transport, and robust structural stability, thereby showing the excellent performance of the electrochemical capacitor. The best performing sample (NiFe₂O₄/CPC-800) exhibited a superior capacitance of 2894F g^-1 at a current density of 0.5 A g^-1. Encouragingly, an asymmetric supercapacitor with NiFe₂O₄/CPC-800 as a positive electrode and activated carbon as a negative electrode delivered a high energy density of 135.2 W h kg^-1 along with an improved power density of 10.04 kW kg^-1. Meanwhile, the superior cycling stability of 90.2% over 10,000 cycles at 5 A g^-1 was achieved. Overall, the presented work offers a guideline for the design and preparation of advanced electrode materials for energy-storage systems.

Facile Route for Fabrication of Ferrimagnetic Mn3O4 Spinel Material for Supercapacitors with Enhanced Capacitance

The purpose of this investigation was the development of a new colloidal route for the fabrication of Mn3O4 electrodes for supercapacitors with enhanced charge storage performance. Mn3O4-carbon nanotube electrodes were fabricated with record-high capacitances of 6.67 F cm−2 obtained from cyclic voltammetry tests at a scan rate of 2 mV s−1 and 7.55 F cm−2 obtained from the galvanostatic charge–discharge tests at a current density of 3 mA cm−2 in 0.5 M Na2SO4 electrolyte in a potential window of 0.9 V. The approach involves the use of murexide as a capping agent for the synthesis of Mn3O4 and a co-dispersant for Mn3O4 and carbon nanotubes. Good electrochemical performance of the electrode material was achieved at a high active mass loading of 40 mg cm−2 and was linked to a reduced agglomeration of Mn3O4 nanoparticles and efficient co-dispersion of Mn3O4 with carbon nanotubes. The mechanisms of murexide adsorption on Mn3O4 and carbon nanotube are discussed. With the proposed method, the time-consuming electrode activation procedure for Mn3O4 electrodes can be avoided. The approach developed in this investigation paves the way for the fabrication of advanced cathodes for asymmetric supercapacitors and multifunctional devices, combining capacitive, magnetic, and other functional properties.

Rationalizing Surface Electronic Configuration of Ni-Fe LDO by Introducing Cationic Nickel Vacancies as Highly Efficient Electrocatalysts for Lithium-Oxygen Batteries

Cationic defect engineering is an effective strategy to optimize the electronic structure of active sites and boost the oxygen electrode reactions in lithium-oxygen batteries (LOBs). Herein, Ni-Fe layered double oxides enriched with cationic nickel vacancies (Ni-Fe LDO-V_Ni ) are first designed and studied as the electrocatalysts for LOBs. Based on the density functional theory calculation, the existence of nickel vacancy in Ni-Fe LDO-V_Ni significantly improves its intrinsic affinity toward intermediates, thereby fundamentally optimizing the formation and decomposition pathway of Li₂ O₂ . In addition, the number of e_g electrons on each nickel site is 1.19 for Ni-Fe LDO-V_Ni , which is much closer to 1 than 1.49 for Ni-Fe LDO. The near-unity occupation of e_g orbital enhances the covalency of transition metal-oxygen bonds and thus improves the electrocatalytic activity of Ni-Fe LDO-V_Ni toward oxygen electrode reactions. The experimental results show that the LOBs with Ni-Fe LDO-V_Ni electrode deliver low overpotentials of 0.11/0.29 V during the oxygen reduction reaction/oxygen evolution reaction, respectively, large specific capacities of 13 933 mA h g^-1 and superior cycling stability of over 826 h. This study provides a novel approach to optimize the electrocatalytic activity of LDO through reasonable defect engineering.

Enhancing energy storage capacity of iron oxide-based anodes by adjusting Fe (II/III) ratio in spinel crystalline

Supercapacitors, as promising energy storage candidates, are limited by their unsatisfactory anodes. Herein, we proposed a strategy to improve the electrochemical performance of iron oxide anodes by spinel-framework constraining. We have optimized the anode performance by adjusting the doping ratio of Fe (II/III) self-redox pairs. Structure and electronic state characterizations reveal that the Ni_xFe_3-xO₄was composed of Fe (II/III) and Ni (II/III) pairs in lattice, ensuring a flexible framework for the reversible reaction of Fe (II/III). Typically, when the ratio of Fe (II/III) is 0.91:1 (Fe (II/III)-0.91/1), the Ni_xFe_3-xO₄anode shows a remarkable electrochemical performance with a high specific capacitance of 1694 F g^-1at the current density of 2 A g^-1and capacitance retention of 81.58%, even at a large current density of 50 A g^-1. In addition, the obtained material presents an ultra-stable electrochemical performance, and there is no observable degradation after 5000 cycles. Moreover, an assembled asymmetric supercapacitor of Ni-Co-S@CC//Ni_xFe_3-xO₄@CC presents a maximum energy density of 136.82 Wh kg^-1at the power density of 850.02 W kg^-1. When the power density was close to 42 500 W kg^-1, the energy density was still maintained 63.75 Wh kg^-1. The study indicates that inherent performance of anode material can be improved by tuning the valence charge of active ions.

Solventless synthesis of nanospinel Ni1−xCoxFe2O4 (0 ≤ x ≤ 1) solid solutions for efficient electrochemical water splitting and supercapacitance

The formation of solid solutions represents a robust strategy for modulating the electronic properties and improving the electrochemical performance of spinel ferrites. However, solid solutions have been predominantly prepared via wet chemical routes, which involve the use of harmful and/or expensive chemicals. In the present study, a facile, inexpensive and environmentally benign solventless route is employed for the composition-controlled synthesis of nanoscopic Ni_1−xCo_xFe₂O₄ (0 ≤ x ≤ 1) solid solutions. The physicochemical characterization of the samples was performed by p-XRD, SEM, EDX, XPS, TEM, HRTEM and UV-Vis techniques. A systematic investigation was also carried out to elucidate the electrochemical performance of the prepared nanospinels towards energy generation and storage. Based on the results of CV, GCD, and stability tests, the Ni_0.4Co_0.6Fe₂O₄ electrode showed the highest performance for the supercapacitor electrode exhibiting a specific capacitance of 237 F g⁻¹, superior energy density of 10.3 W h kg⁻¹ and a high power density with a peak value of 4208 W kg⁻¹, and 100% of its charge storage capacity was retained after 4000 cycles with 97% coulombic efficiency. For HER, the Ni_0.6Co_0.4Fe₂O₄ and CoFe₂O₄ electrodes showed low overpotentials of 168 and 169 mV, respectively, indicating better catalytic activity. For OER, the Ni_0.8Co_0.2Fe₂O₄ electrode exhibited a lower overpotential of 320 mV at a current density of 10 mA cm⁻², with a Tafel slope of 79 mV dec⁻¹, demonstrating a fast and efficient process. These results indicated that nanospinel ferrite solid solutions could be employed as promising electrode materials for supercapacitor and water splitting applications.

The formation of solid solutions represents a robust strategy for modulating the electronic properties and improving the electrochemical performance of spinel ferrites.

Design of a ZnMoO4 porous nanosheet with oxygen vacancies as a better performance electrode material for supercapacitors

A ZnMoO₄ porous nanosheet with oxygen vacancies (ZnMoO₄-OV) was synthesized which delivers a preferable energy storage performance.

Estimation of the spatial distribution of Frenkel defects in NiFe2O4 by simulation of HAADF-STEM images

Accurate determination of the atomic spatial configuration of Frenkel defects is important for understanding the mechanism and fully utilizing these defects to optimize the material properties. In this study, aberration-corrected scanning transmission electron microscopy (STEM) was used to identify the Fe vacancies and Fe Frenkel defect pairs, which have not been previously investigated, in NiFe2O4 (NFO). The spatial distribution of these point defects is determined by comparing the experimental and simulated images, where the experimental image intensities are consistent with the calculated image intensities. We confirmed the stabilities of the observed point defect configurations and calculated their electronic structures using density functional theory. A comprehensive understanding of the relationship between the Frenkel defect spatial configurations and electronic properties is obtained, which provides an alternative method to regulate the NFO performance.

Observation of morphology resembling Hydrangea macrophylla flower in SILAR-deposited MFe2O4 (M=Co2+, Ni2+, Mn2+) nanocrystallites: synergetic effect on electrochemical performance

The successive ionic layer adsorption and reaction (SILAR) experimental process has been used to develop a high-efficiency electrode of MFe₂O₄ (M = Ni, Co and Mn) on substrates at ambient temperature. Structural, morphological and electrochemical properties have been investigated using x-ray diffraction (XRD), a scanning electron microscope (SEM) and an electrochemical test station, respectively. A morphology resembling the Hydrangea macrophylla flower has been observed and tuned with varying Fe concentration. The formation of MFe₂O₄ demonstrates the efficient electrochemical behavior and the specific capacitance has been evaluated as ∼1380, ∼972 and ∼815 Fg^-1 for CoFe₂O₄ (CF), NiFe₂O₄ (NF) and MnFe₂O₄ (MF), respectively, at a current density of 1 Ag^-1. Also, the developed electrodes maintain excellent cyclic retention of ∼92%, ∼89% and ∼86% for CF, NF, and MF, respectively, up to 5000 cycles. Further, asymmetric solid-state supercapacitor (ASC) devices have been fabricated using the best compositions of MFe₂O₄ as a positive electrode and carbon black (CB) as a negative electrode, and successfully illuminate a 1.8 V commercial LED.

Construction of heterostructured NiFe2O4-C nanorods by transition metal recycling from simulated electroplating sludge leaching solution for high performance lithium ion batteries

NiFe2O4 has been regarded as one of the promising candidates for lithium-ion battery (LIB) anode materials due to its high theoretical specific capacity. However, the large volume expansion and pulverization of NiFe2O4 during the charge/discharge process result in severe capacity fading. Herein, heterostructured NiFe2O4-C nanorods have been successfully fabricated by recovering transition metals from simulated electroplating sludge leaching solution. The constructed NiFe2O4-C heterointerface plays a vital role in accommodating volume change, stabilizing the reaction products and providing rapid electron and Li+ ion transportation ability, resulting in a high and stable Li+ accommodation performance. The fabricated NiFe2O4-C nanorods demonstrate a high specific capacity (889.9 mA h g-1 at 100 mA g-1), impressive rate capability (861.5, 704.5, 651.4, 579.6 and 502.1 mA h g-1 at 0.2, 0.6, 1.0, 2.0 and 5.0 A g-1) and cycling stability (650.2 mA h g-1 at 2 A g-1 after 500 cycles). This work exemplifies a facile and effective approach for the fabrication of high performance LIB electrode materials by recycling metals from electroplating sludge in an application-oriented manner.

CuCo2 S4 -rGO Microflowers: First-Principle Calculation and Application in Energy Storage

This paper demonstrates the ability of a CuCo₂ S₄ -reduced graphene oxide (rGO) composite to perform robust electrochemical performances applying to supercapacitors (SCs) and lithium ion batteries (LIBs). The first-principle calculation based on density functional theory is conducted to study the electronic property of CuCo₂ O₄ and CuCo₂ S₄ and provide a theoretical basis for this work. Then, the 3D spinel-structured CuCo₂ O₄ and CuCo₂ S₄ microflowers are synthesized and compared as electrodes for both SCs and LIBs. The CuCo₂ S₄ microflowers can provide a larger specific surface area, which enlarges the contact area between the electrode material and the electrolyte and contributes to high-efficiency electrochemical reactions. The reduced graphene oxides are coated on the CuCo₂ S₄ microflowers, therefore effectively increasing the conductivity, and further absorbing the stress produced in the reaction process. As an electrode of a symmetric supercapacitor, the optimized CuCo₂ S₄ -rGO composite exhibits an energy density of 16.07 Wh kg^-1 and a maximum power density of 3600 W kg^-1 . Moreover, the CuCo₂ S₄ -rGO composite can also be used as an anode for lithium ion batteries, exhibiting a reversible capacity of 1050 mAh g^-1 after 140 cycles at the current density of 200 mA g^-1 . The galvanostatic intermittence titration techniques also reveal superior Li-ion diffusion behavior of the CuCo₂ S₄ -rGO composite during redox reactions.

Enhanced Supercapacitive Performance of Higher-Ordered 3D-Hierarchical Structures of Hydrothermally Obtained ZnCo2O4 for Energy Storage Devices

The demand for eco-friendly renewable energy resources as energy storage and management devices is increased due to their high-power density and fast charge/discharge capacity. Recently, supercapacitors have fascinated due to their fast charge-discharge capability and high-power density along with safety. Herein, the authors present the synthesis of 3D-hierarchical peony-like ZnCo2O4 structures with 2D-nanoflakes by a hydrothermal method using polyvinylpyrrolidone. The reaction time was modified to obtain two samples (ZCO-6h and ZCO-12h) and the rest of the synthesis conditions were the same. The synthesized structures were systematically studied through various techniques: their crystalline characteristics were studied through XRD analysis, their morphologies were inspected through SEM and TEM, and the elemental distribution and oxidation states were studied by X-ray photoelectron spectroscopy (XPS). ZCO-12h sample has a larger surface area (55.40 m2·g-1) and pore size (24.69 nm) than ZCO-6h, enabling high-speed transport of ions and electrons. The ZCO-12h electrode showed a high-specific capacitance of 421.05 F·g-1 (31.52 C·g-1) at 1 A·g-1 and excellent cycle performance as measured by electrochemical analysis. Moreover, the morphologic characteristics of the prepared hierarchical materials contributed significantly to the improvement of specific capacitance. The excellent capacitive outcomes recommend the 3D-ZnCo2O4 hierarchical peony-like structures composed of 2D-nanoflakes as promising materials for supercapacitors with high-performance.

Formation of graphene-wrapped multi-shelled NiGa2O4 hollow spheres and graphene-wrapped yolk-shell NiFe2O4 hollow spheres derived from metal-organic frameworks for high-performance hybrid supercapacitors

To construct a supercapacitor (SC) with considerable performance, synthesis of an electrode material with a highly porous structure is necessary. Herein, an efficient metal-organic framework (MOF)-derived procedure is offered to construct a graphene wrapped multi-shelled NiGa2O4 hollow sphere (GW-MSNGOHS) positive electrode material and a graphene-wrapped yolk-shell NiFe2O4 hollow sphere (GW-YS-NFOHS) negative electrode material with a highly porous nature in SCs. The GW-MSNGOHS and GW-YS-NFOHS electrodes exhibit excellent capacities (∼411.25 mA h g-1 and 254.25 mA h g-1, respectively, at 1 A g-1), reasonable rate performances (75.85%, and 62.7%, respectively), and outstanding cyclability (98.9% and 90.9%, respectively). Benefiting from the reasonably engineered negative and positive electrodes, the fabricated asymmetric device (GW-MSNGOHS//GW-YS-NFOHS) can show an excellent energy density (ED) of 118.97 W h kg-1 at a power density (PD) of 1702 W kg-1, an exceptional robustness of 92.1%, and an excellent capacity (Cs) of 140.2 mA g-1.

Bimetallic FeNi-MIL-88-derived NiFe2O4@Ni–Mn LDH composite electrode material for a high performance asymmetric supercapacitor

A novel NiFe₂O₄@Ni–Mn LDH/NF composite was synthesized by deriving bimetallic FeNi-MIL-88, and has potential application as a high-performance supercapacitor.

A high-performance asymmetric supercapacitor electrode based on a three-dimensional ZnMoO4/CoO nanohybrid on nickel foam

A two-step hydrothermal route was employed to fabricate a ZnMoO₄/CoO nanohybrid supported on Ni foam. The ZnMoO₄/CoO nanohybrid shows a three-dimensional criss-crossed structure. The specific surface area is enhanced from 45 m² g^-1 of ZnMoO₄ to 67 m² g^-1 of the ZnMoO₄/CoO nanohybrid. Furthermore, the existence of electroactive CoO is in favor of reducing the charge transport resistance. The ZnMoO₄/CoO nanohybrid electrode possesses a high capacitance of 4.47 F cm^-2 at 2 mA cm^-2, which is much higher than those of ZnMoO₄ (1.07 F cm^-2) and CoO (2.47 F cm^-2). The ZnMoO₄/CoO nanohybrid electrode also exhibits an ultrahigh cycling stability with 100.5% capacitance retention after 5000 cycles at 20 mA cm^-2. In addition, an asymmetric all-solid-state supercapacitor was assembled using the ZnMoO₄/CoO nanohybrid as the positive electrode and exfoliated graphite carbon paper as the negative electrode. The asymmetric supercapacitor exhibits a superior energy density of 58.6 W h kg^-1 at a power density of 800 W kg^-1 and a considerable cycling stability with 81.8% capacitance retention after 5000 cycles at 5 A g^-1. The ZnMoO₄/CoO nanohybrid demonstrates its tremendous advantages and possibilities as a positive electrode material in energy storage applications. Moreover, for a better understanding of the electrochemical behavior, a combined study of experimental measurements and density functional theory calculations is also applied to illustrate the high-performance of the ZnMoO₄/CoO nanohybrid.

Fluoride ion assisted growth of hierarchical flowerlike nanostructures of Co/Ni ferrites and their magnetoresistive response

One-dimensional nanorod arrays exhibiting hierarchical flowerlike morphologies, of Co and Ni based ferrites were synthesized by hydrothermal treatment and using ammonium fluoride (NH₄F) as a mineralizing agent. The effects of NH₄F concentration and synthesis temperature were probed to control the morphology of these nanorods that were formed as a result of crystal nucleation. It was observed that a higher concentration of NH₄F leads to several other nucleation sites above these nanorods while controlled concentration of precursors and NH₄F results in the synthesis of floral patterns. The specific geometries of these nanorods leads to a shape anisotropy effect resulting in increased magnetic coercive fields. To study the effect of magnetic field on the resistance and current density, impedance spectroscopy and I–V–R characteristics, respectively, were performed. Nanorods show enhanced values for resistance with the increase in magnetic field confirming the effect of magnetoresistive coupling while a decrease in current densities with increasing magnetic field highlights the potential of these structures for magnetoresistive applications.

One-dimensional nanorod arrays of Co/Ni ferrites emerging into hierarchical flowerlike morphologies, prepared by hydrothermal treatment, using ammonium fluoride (NH₄F) as a mineralizing agent.

Facile Synthesis of Thiol-Functionalized Magnetic Activated Carbon and Application for the Removal of Mercury(II) from Aqueous Solution

To improve the adsorption capacity, reduce the disposal cost, and enhance the separation efficiency of common activated carbon as an adsorbent in wastewater treatment, a novel thiol-modified magnetic activated carbon adsorbent of NiFe₂O₄-PAC-SH was successfully synthesized with a facile and safe hydrothermal method without any toxic and harmful reaction media. The as-prepared NiFe₂O₄-PAC-SH can effectively remove mercury(II) ions from aqueous solution. The maximal adsorption capacities from the experiment and Langmuir fitting achieve 298.8 and 366.3 mg/g at pH 7, respectively, exceeding most of adsorptive materials. The as-prepared NiFe₂O₄-PAC-SH has an outstanding regeneration performance, remarkable hydrothermal stability, and efficient separation efficiency. The data of kinetics, isotherms, and thermodynamics show that the adsorption of mercury(II) ions is spontaneous and exothermic. Ion exchange and electrostatic attraction are the main adsorption factors. The experimental results exhibit that the NiFe₂O₄-PAC-SH can be a prominent substitute for conventional activated carbon as an adsorbent.

α-Ni(OH)2/NiS1.97 heterojunction composites with excellent ion and electron transport properties for advanced supercapacitors

It is recognized that an effective strategy to promote the industrialization of supercapacitors is to enhance the ion and electronic conductivities of electrode materials. In this work, it is demonstrated that the NO/NS-8 heterojunction material obtained via an epitaxial growth method based on ion exchange can be used as an outstanding electrode material for supercapacitors. The construction of heterojunctions between α-Ni(OH)2 and NiS1.97 allows the components to provide each other with ion or electron transport paths and endows NO/NS-8 with excellent ion and electron transport properties; this leads to a high utilization rate of active materials and an unprecedented high specific capacitance (up to 2375.8 F g-1 at 1 mV s-1 in a three-electrode system). Using the as-prepared NO/NS-8 heterojunction material as an electroactive material, an asymmetric supercapacitor with long cycle life (62.8% capacitance retention after 10 000 cycles at a current density of 5 A g-1) and high energy and power densities (128.4 W h kg-1 at a power density of 402.9 W kg-1 and 63.8 W h kg-1 at 7662.7 W kg-1) is finally demonstrated. This work provides a novel strategy for developing unique heterojunction materials for energy storage.

Enhanced supercapacitive performance of the CoFe2O4/CoFe2S4 composite nanoflake array induced by surface sulfidation

The CoFe₂O₄/CoFe₂S₄ composite nanoflake array was prepared by surface sulfidation and exhibited outstanding electrochemical performance.