Nitrogen-doped CoOx/carbon nanotubes derived by plasma-enhanced atomic layer deposition: Efficient bifunctional electrocatalyst for oxygen reduction and evolution reactions

Recycling cobalt from spent lithium-ion batteries for designing the novel cobalt nitride followers: Towards efficient overall water splitting and advanced zinc-air batteries

Although cobalt nitride (CoN)-based nanomaterials have been widely designed as advanced oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR) catalysts, the continuous consumption of lithium-ion batteries (LIBs) has led to a high price of cobalt metal. Therefore, in the future, recycling valuable Co elements from spent devices and boosting their service efficiency will inevitably promote the utilization of Co-based materials in water splitting and zinc-air batteries (ZABs). Herein, we realize the Co recycling from spent LIBs by a simple hydrometallurgy method. Under the assistance of hexamethylenetetramine and polystyrene spheres, after the hydrothermal and pyrolysis treatment in the NH3 atmosphere, the as-reclaimed cobalt oxalates were successfully transformed into novel three-dimensional (3D) CoN nanoflowers (denoted as CoN NFs). Benefiting from the unique 3D flower-like architectures, intrinsic high conductivity, large surface area, uniformly dispersed CoN nanoparticles, and the synergistic effect between Co3N and CoO phases, the 3D flower-like CoN NFs exhibited excellent OER catalytic activity. The performance was much better than commercial RuO2 in the 1.0 M KOH solution. Furthermore, the CoN NFs-based water splitting cell needed a voltage of 1.608 V to achieve the current density of 10 mA cm-2, which is even 16 mV smaller than that of Pt/C||RuO2 benchmark (1.624 V). Meanwhile, the CoN NFs-derived ZAB exhibited a high peak power density of 107.3 mW cm-2 (vs. 103.2 mW cm-2 of Pt/C-RuO2-based ZAB) and a low charge-discharge voltage gap (0.93 V vs. 1.43 V of Pt/C-RuO2-based ZAB). Due to the excellent structural and elemental stabilities, the corresponding water splitting cell and ZAB had outstanding durability. This work successfully explored an advanced industrial chain from recycling Co metal in spent devices to designing the high-efficiency HER/OER/ORR electrocatalysts for advanced water splitting devices and ZABs. This will further promote the value-added utilization of valuable Co metal in various energy storage or conversion devices.

Ni3S2/MxSy-NiCo LDH (M = Cu, Fe, V, Ce, Bi) heterostructure nanosheet arrays on Ni foam as high-efficiency electrocatalyst for electrocatalytic overall water splitting and urea splitting

Here, we synthesized a series of Ni₃S₂/M_xS_y-NiCo LDH materials (M = Cu, Fe, V, Ce, and Bi) by a two-step hydrothermal method for the first time, which display excellent oxygen evolution reaction (OER) and urea oxidation reaction (UOR) properties. M (M = Cu, Fe, V, Ce, and Bi) ions were firstly doped into NiCo LDH to change the original electronic structure and enhance the activity of the LDH. Then, Ni₃S₂ and M_xS_y were introduced by sulfurization of the Ni support and doping cations, and the combination of Ni₃S₂, M_xS_y and NiCo-LDH improved the electron transfer rate and activity of the original material. With Ni₃S₂/Bi₂S₃-NiCo LDH/NF as anode and Ni₃S₂/CuS-NiCo LDH as cathode, an electrolytic cell can reach 10 mA cm^-2 at 1.622 V with outstanding durability for overall water splitting. In addition, with Ni₃S₂/Bi₂S₃-NiCo LDH/NF as both electrodes, it can reach 10 mA cm^-2 at 1.56 V with outstanding durability for overall urea splitting, which is better than that of the overall water splitting. Density functional theory (DFT) calculation shows that the superior electrocatalytic activity can be explained by the water adsorption energy being optimized and enhanced conductivity. This study provides a new idea for improving the catalytic activity and stability of non-noble metals instead of noble metals.

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this review, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

Atomic layer deposited Al2O3 layer confinement: an efficient strategy to synthesize durable MOF-derived catalysts toward the oxygen evolution reaction

Different thicknesses of Al₂O₃ layer protection realize the design of MOF-derived electrocatalysts.

Co/CoP Nanoparticles Encapsulated Within N, P-Doped Carbon Nanotubes on Nanoporous Metal-Organic Framework Nanosheets for Oxygen Reduction and Oxygen Evolution Reactions

Herein, Co/CoP nanoparticles encapsulated with N, P-doped carbon nanotubes derived from the atomic layer deposited hexagonal metal-organic frameworks (MOFs) are obtained by calcinations and subsequent phosphating and are employed as electrocatalyst. The electrocatalytic performance evaluations show that the as-prepared electrocatalyst exhibits an overpotential of 342 mV at current density of 10 mA cm-2 and the Tafel slope of 74 mV dec-1 for oxygen evolution reaction (OER), which is superior to the most advanced ruthenium oxide electrocatalyst. The electrocatalyst also shows better stability than the benchmark RuO2. After 9 h, the current density is only decreased by 10%, which is far less than the loss of RuO2. Moreover, its onset potential for oxygen reduction reaction (ORR) is 0.93 V and follows the ideal 4-electron approach. After the stability test, the current density of the electrocatalyst retains 94% of the initial value, which is better than Pt/C. The above results indicate that the electrocatalyst has bifunctional activity and excellent stability both for OER and ORR. It is believed that this strategy provides guidance for the synthesis of cobalt phosphide/carbon-based electrocatalysts.

TiO2 Nanosheet Arrays with Layered SnS2 and CoOx Nanoparticles for Efficient Photoelectrochemical Water Splitting

Converting solar energy into sustainable hydrogen fuel by photoelectrochemical (PEC) water splitting is a promising technology to solve increasingly serious global energy supply and environmental issues. However, the PEC performance based on TiO2 nanomaterials is hindered by the limited sunlight-harvesting ability and its high recombination rate of photogenerated charge carriers. In this work, layered SnS2 absorbers and CoOx nanoparticles decorated two-dimensional (2D) TiO2 nanosheet array photoelectrode have been rationally designed and successfully synthesized, which remarkably enhanced the PEC performance for water splitting. As the result, photoconversion efficiency of TiO2/SnS2/CoOx and TiO2/SnS2 hybrid photoanodes increases by 3.6 and 2.0 times under simulated sunlight illumination, compared with the bare TiO2 nanosheet arrays photoanode. Furthermore, the TiO2/SnS2/CoOx photoanode also presented higher PEC stability owing to CoOx catalyst served as efficient water oxidation catalyst as well as an effective protectant for preventing absorber photocorrosion.

A carob-inspired nanoscale design of yolk–shell Si@void@TiO2-CNF composite as anode material for high-performance lithium-ion batteries

The one-dimensional yolk–shell structured Si@void@TiO₂-CNF anode delivers improved specific capacity and cycling performance for lithium ion batteries.