Gold nanorods and graphene oxide enhanced BSA-AgInS2 quantum dot-based photoelectrochemical sensors for detection of dopamine

Carbon-based photoelectrochemical sensors: recent developments and future prospects

Owing to the considerable potential of photoelectrochemical (PEC) sensors, they have gained significant attention in the analysis of biological, environmental, and food markers. However, the limited charge mass transfer efficiency and rapid recombination of electron hole pairs have become obstacles in the development of PEC sensors. In this case, considering the unique advantages of carbon-based materials, they can be used as photosensitizers, supporting materials and conductive substrates and coupled with semiconductors to prepare composite materials, solving the above problems. In addition, there are many types of carbon materials, which can have semiconductor properties and form heterojunctions after coupling with semiconductors, effectively promoting the separation of electron hole pairs. Herein, we aimed to provide a comprehensive analysis of reports on carbon-based PEC sensors by introducing their research and application status and discussing future development trends in this field. In particular, the types and performance improvement strategies of carbon-based electrodes and the working principles of carbon-based PEC sensors are explained. Furthermore, the applications of carbon-based photoelectric sensors in environmental monitoring, biomedicine, and food detection are highlighted. Finally, the current limitations in the research on carbon-based PEC sensors are emphasized and the need to enhance the sensitivity and selectivity through material modification, structural design, improved device performance, and other strategies are emphasized.

Development of novel nanocomposite-modified photoelectrochemical sensor based on the association of bismuth vanadate and MWCNT-grafted-molecularly imprinted poly(acrylic acid) for dopamine determination at nanomolar level

This study proposes the development of a new photoelectrochemical (PEC) sensor for the determination of dopamine (DA) at nanomolar levels. The PEC sensor was based on a physical mixture of bismuth vanadate (BiVO4) with nanocomposite molecularly imprinted poly(acrylic acid) (MIP-AA) grafted onto MWCNTox by using the surface-controlled radical polymerization strategy with an INIFERTER reagent. XRD, diffuse reflectance spectroscopy (DRE), SEM, TEM, and TGA were employed to characterize the materials. Photoelectrochemical analyses were carried out with GCE/BiVO4/MIP-AA sensor under visible light using a potential of 0.6 V, phosphate buffer (0.1 mol L-1) at pH 7.0, and modifying the GCE with a film composed of monoclinic BiVO4 at 3.5 mg mL-1 and nanocomposite MIP prepared with acrylic acid (MIP-AA) at 0.1 mg mL-1. The proposed method using the GCE/BiVO4/MIP-AA sensor presented a limit of detection (LOD) of 2.9 nmol L-1, a linear range from 9.7 to 150 nmol L-1 and it was successfully applied for analysis of DA in urine samples using external calibration curve yielding recovery values of 90-105%. Additionally, the proposed PEC sensor allowed DA determination without interference from uric acid, ascorbic acid, epinephrine, norepinephrine, and other unwanted interferences.

Ultrasensitive photoelectrochemical microcystin-LR immunosensor using carboxyl-functionalized graphene oxide enhanced gold nanoclusters for signal amplification

An ultrasensitive photoelectrochemical (PEC) immunosensor based on gold nanoclusters (AuNCs) with 11-mercaptoundecanoic acid (MUA) ligands was fabricated for determination of microcystin-LR (MC-LR). The PEC immunosensor was developed by loading the monoclonal MC-LR antibody (Ab) to the MUA-AuNCs modified gold electrodes. After different measurement conditions being optimized, silver nanoparticles (AgNPs), gold nanorods (AuNRs), graphene oxide (GO) and carboxyl-functionalized graphene oxide (cGO) were introduced into MUA-AuNCs to enhance the sensing properties. The experimental result revealed that the sensitivity of PEC immunosensors was enhanced by both their photoelectrochemical properties and antibody loading properties with dependent relationship, which was different from the enhancement strategy of PEC sensors based on redox reactions. Among different hybrid nanocomposites, MUA-AuNCs/cGO not only improved the photoelectrochemical properties, but also loaded more antibodies for sensing, which resulted in best sensing performance. Thus, a universal method was proposed to enhance the sensing performance of PEC immunosensors based on impedance changes. Finally, MUA-AuNCs/cGO based PEC immunosensors exhibited a wide linear range of 0.001 nM-1000 nM with low detection limit of 0.011 pM (S/N = 3) for MC-LR determination. Meanwhile, the designed PEC immunosensors showed high selectivity, reproducibility and specificity, which provided the promising applications in aquatic environment.

Voltamperometric Sensors and Biosensors Based on Carbon Nanomaterials Used for Detecting Caffeic Acid-A Review

Caffeic acid is one of the most important hydroxycinnamic acids found in various foods and plant products. It has multiple beneficial effects in the human body such as antioxidant, antibacterial, anti-inflammatory, and antineoplastic. Since overdoses of caffeic acid may have negative effects, the quality and quantity of this acid in foods, pharmaceuticals, food supplements, etc., needs to be accurately determined. The present paper analyzes the most representative scientific papers published mostly in the last 10 years which describe the development and characterization of voltamperometric sensors or biosensors based on carbon nanomaterials and/or enzyme commonly used for detecting caffeic acid and a series of methods which may improve the performance characteristics of such sensors.

Silver nanoclusters and carbon dots based light-addressable sensors for multichannel detections of dopamine and glutathione and its applications in probing of parkinson's diseases

Parkinson's disease (PD) is a common neurological disease caused by nerve cells degradation which leads to extremely low level of dopamine (DA) in patients. Therefore, ultrasensitive DA detection is particularly important for the assessment and treatment of Parkinson's patients. In this research, photoelectrochemical (PEC) sensors based on Ag₄₄(SR)₃₀ nanoclusters (AgNCs) with 5-mercapto-2-nitrobenzoic acid (MNBA) ligands were first developed for ultrasensitive and selective detection of DA. Then, hybrid nanomaterials by introducing graphene oxide (GO) and silver nanoparticles (AgNPs) into AgNCs were used to enhance sensing properties. AgNCs/AgNPs/GO based PEC sensors achieved high sensitivity (7.476 nA/μM) and low limit of detection (LOD, S/N = 3, 53 nM) in the linear range 0.16-6 μM DA concentration. Besides DA, PD causes the concentration change of other analytes, such as glutathione (GSH). Multichannel detections of different analytes can provide more information in studying PD. Therefore, carbon dots (CDs) based PEC sensors were designed and achieved high sensing performances on GSH detection. Then, AgNCs/AgNPs/GO and CDs based PEC sensors were combined and extended into light-addressable sensors for multichannel detections of DA and GSH. Algorithms were used to solve interference problems to improve the measurement accuracy of DA and GSH in complex solution. Finally, PD biological model samples from mice were measured by light-addressable sensors. The relationships between the DA and GSH concentration and the PD stage were proved. Our designed light-addressable sensors exhibited advantages of multichannel detection, high sensitivity, fast response and so on. In the future, it can be expanded to detect more biological molecules to provide more information on studying PD.

Graphene Oxide-Coated Gold Nanorods: Synthesis and Applications

The application of gold nanorods (AuNRs) and graphene oxide (GO) has been widely studied due to their unique properties. Although each material has its own challenges, their combination produces an exceptional material for many applications such as sensor, therapeutics, and many others. This review covers the progress made so far in the synthesis and application of GO-coated AuNRs (GO-AuNRs). Initially, it highlights different methods of synthesizing AuNRs and GO followed by two approaches (ex situ and in situ approaches) of coating AuNRs with GO. In addition, the properties of GO-AuNRs composite such as biocompatibility, photothermal profiling, and their various applications, which include photothermal therapy, theranostic, sensor, and other applications of GO-AuNRs are also discussed. The review concludes with challenges associated with GO-AuNRs and future perspectives.

Photo-electrochemical detection of dopamine in human urine and calf serum based on MIL-101 (Cr)/carbon black

A new photo-electrochemical sensor based on MIL-101(Cr) MOF/carbon black (CB) is fabricated and characterized. By using differential pulse voltammetry, dopamine (DA) can be effectively detected using a photo-electrochemical MIL-101(Cr)/CB sensor under visible light. The CB acts as the electron bridge to combine with the large specific surface area and photo-catalytic feature of MOF, which contribute to the improvements of sensitivity of DA detection. The concentration of the catalyst, pH value, accumulation potential, and accumulation time were also optimized. Furthermore, the electrochemical performances of MIL-101(Cr)/CB sensor was investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scan rate, electrochemically active surface area (ECSA), and amperometric responses. A detection limit of 0.38 nM (LOD = 3 s_b/S, s_b = 0.028) and a working range of 1 nM to 2.22 μM has been achieved. The MIL-101(Cr)/CB sensor exhibits excellent reproducibility, stability, and selectivity and also has satisfactory recovery rate for the analysis of real samples including calf serum and human urine. Graphical abstract.

Comparison between electrochemical and photoelectrochemical detection of dopamine based on titania-ceria-graphene quantum dots nanocomposite

In this study, titania-ceria-graphene quantum dot (TC-GQD) nanocomposite was synthesized by hydrothermal method for the first time. The prepared nanomaterials were characterized by XRD, FTIR dynamic light scattering (DLS), FESEM, HRTEM, and EDX spectroscopy along with elemental mapping. The synergistic effect of the nanocomposite components was studied by diffuse reflectance spectroscopy (DRS) and electrical conductivity meter. The results showed that band gap of TC-GQD nanocomposite was shifted to visible lights relative to its components (1.3 eV), and electrical conductivity of the sample was significant increased to 89.5 μS cm^-1. After chemical and physical characterization, prepared new nanocomposites were used to design a new electrochemical (EC) and photoelectrochemical (PEC) dopamine (DA) sensors. In both EC and PEC methods effecting experimental parameters were optimized. Due to the synergic effect of the nanocomposite components, an outstanding photocurrent response was observed for DA based on PEC sensor. A linear calibration curve with a lower detection limit of 22 nM DA, and sensitivity of 13.8 mA/mM_(DA), in a wider range of 0.3-750 μM DA, was obtained for TC-GQD/GCE electrode in PEC. While, the TC-GQD/GCE electrode detected DA in the range of 1-500 μM DA, with two linear calibration curve, detection limit of 0.22 μM DA, and sensitivity of 4.9 mA/mM_(DA), in the EC. Observed results from EC and PEC sensors are presented and compared.

Investigation of AgInS2/ZnS Quantum Dots by Magnetic Circular Dichroism Spectroscopy

Over recent years, quantum dots (QDs) based on ternary metal dichalcogenides have attracted a lot of attention due to their unique properties and a range of potential applications. Here, we review the latest studies on the optical properties of AgInS2/ZnS QDs with emphasis on their theoretical modeling, and present our investigations of electronic transitions invisible in unstructured absorption spectra of AgInS2/ZnS QDs. The analysis of the absorption, photoluminescence excitation (PLE), and magnetic circular dichroism (MCD) spectra of hydrophobic and hydrophilic AgInS2/ZnS QDs of different sizes enables us to determine positions of electron transitions in these QDs. We demonstrate that the use of the second derivative of PLE spectra provides more unequivocal data on the position of the energy transitions compared with the second derivative of absorption spectra. Analysis of the MCD spectra reveals that the magnetic field induces energy level mixing in AgInS2/ZnS QDs in contrast to the traditional Cd-based QDs, where MCD is associated only with removing degeneracy of the excited energy level.