Electroreduction of oxygen in alkaline solution on iron phthalocyanine modified carbide-derived carbons

Evidence of carbon-supported porphyrins pyrolyzed for the oxygen reduction reaction keeping integrity

Fe(III) 5,10,15,20-(tetraphenyl)porphyrin chloride (FeTPP) and Co(III) 5,10,15,20-(tetraphenyl)porphyrin chloride (CoTPP) were adsorbed on carbon Vulcan and studied as electrocatalysts for the oxygen reduction reaction (ORR) before and after pyrolysis. The pyrolysis process was also simulated through ab initio molecular dynamic simulations and the minimum energy path for the O₂ dissociation after the interaction with the metal center of the FeTPP and CoTPP were calculated. After the pyrolysis the FeTPP showed the best performances reducing O₂ completely to H₂O with increased limiting current and lower overpotential. Tafel slops for the various catalysts did not change after the pyrolytic process suggesting that the mechanism for the ORR is not affected by the heat treatment. TEM images, X-ray diffraction, XPS spectroscopy, ⁵⁷Fe Mössbauer, and DFT simulations, suggest that there is no breakdown of the macrocyclic complex at elevated temperatures, and that the macro cyclic geometry is preserved. Small variations in the Metal-O₂ (M-O₂) binding energies and the M–N bond length were observed which is attributed to the dispersive interaction between the macrocycles and the irregular surface of the Vulcan substrate induced by the heat treatment and causing better interaction with the O₂ molecule. The theoretical strategy herein applied well simulate and explain the nature of the M–N–C active sites and the performances towards the ORR.

V. S, Menon RS, Panda SK, Sahu AK. In-situ fabrication of cobalt sulfide decorated N, S co-doped mesoporous carbon and its application as electrocatalyst for efficient oxygen reduction reaction

Designing an efficient electrocatalyst for facile oxygen reduction reaction (ORR) is essential to achieve higher fuel cell performance. Herein, we demonstrate the simple in-situ process to synthesize cobalt sulfide decorated...

Bifunctional Oxygen Electrocatalysis on Mixed Metal Phthalocyanine-Modified Carbon Nanotubes Prepared via Pyrolysis

Non-precious-metal catalysts are promising alternatives for Pt-based cathode materials in low-temperature fuel cells, which is of great environmental importance. Here, we have investigated the bifunctional electrocatalytic activity toward the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) of mixed metal (FeNi; FeMn; FeCo) phthalocyanine-modified multiwalled carbon nanotubes (MWCNTs) prepared by a simple pyrolysis method. Among the bimetallic catalysts containing nitrogen derived from corresponding metal phthalocyanines, we report the excellent ORR activity of FeCoN-MWCNT and FeMnN-MWCNT catalysts with the ORR onset potential of 0.93 V and FeNiN-MWCNT catalyst for the OER having EOER = 1.58 V at 10 mA cm-2. The surface morphology, structure, and elemental composition of the prepared catalysts were examined with scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The FeCoN-MWCNT and FeMnN-MWCNT catalysts were prepared as cathodes and tested in anion-exchange membrane fuel cells (AEMFCs). Both catalysts displayed remarkable AEMFC performance with a peak power density as high as 692 mW cm-2 for FeCoN-MWCNT.

Iron-Based Electrocatalysts for Energy Conversion: Effect of Ball Milling on Oxygen Reduction Activity

In this work, we synthesized new materials based on Fe(II) phthalocyanine (FePc), urea and carbon black pearls (BP), called Fe-N-C, as electrocatalysts for the oxygen reduction reaction (ORR) in neutral solution. The electrocatalysts were prepared by combining ball-milling and pyrolysis treatments, which affected the electrochemical surface area (ECSA) and electrocatalytic activity toward ORR, and stability was evaluated by cyclic voltammetry and chronoamperometry. Ball-milling allowed us to increase the ECSA, and the ORR activity as compared to the Fe-N-C sample obtained without any ball-milling. The effect of a subsequent pyrolysis treatment after ball-milling further improved the electrocatalytic stability of the materials. The set of results indicated that combining ball-milling time and pyrolysis treatments allowed us to obtain Fe-N-C catalysts with high catalytic activity toward ORR and stability which makes them suitable for microbial fuel cell applications.

Activation of Carbon Porous Paper for Alkaline Alcoholic Fuel Cells

In this study, various treatment methods to increase the reactivity of carbon porous electrodes for alkaline alcoholic fuel cells were investigated with commercially available carbon papers to understand the characteristic electrochemical behaviors of the treated carbon electrodes and to find the best method to enhance the cell performance. Effects of thermal treatment, potassium hydroxide (KOH) treatment, N2 doping, and reaction-area control via a multi-layered structure were compared in the cell-based tests, and a huge improvement in the cell performance (i.e., 64% increase of open circuit voltage (OCV) and 320% increase of max power density) was found from the thermal-treated four-layered carbon porous electrode. The results were compared with those from platinum on carbon (Pt/C)-based cells, and a discussion on the direction of research in the future was conducted. The results of this study are expected to provide key guidelines for alcoholic fuel cell (AFC) developers to develop cost-effective AFC with a carbon electrode.

Graphene wrapped Fe7C3 nanoparticles supported on N-doped graphene nanosheets for efficient and highly methanol-tolerant oxygen reduction reaction

Green and efficient non-precious metal electrocatalysts for oxygen reduction reaction (ORR) are prepared to meet the increasing demand for clean, secure and sustainable energy. Herein, we report a novel and environmentally friendly strategy for synthesis of graphene-wrapped iron carbide (Fe₇C₃) nanoparticles supported on hierarchical fibrous N-doped graphene with open-mesoporous structures (Fe₇C₃/NG) by simply annealing the mixture of melamine, iron (II) phthalocyanine (FePc) and Fe₂O₃. The effects of the pyrolysis temperature and the molar ratio of FePc to melamine were critically examined in the controls. Remarkably, the Fe₇C₃/NG obtained at 800 °C (i.e. Fe₇C₃/NG-800) manifested the forward shifts in the onset potential (0.98 V) and half-wave potential (0.85 V) with respective to commercial Pt/C (50 wt%) in 0.1 M KOH, coupled with the great enhancement in the durability (still remained 92.11% of its initial current density even after 40,000 s) and strong methanol tolerance. This research presents a promising strategy for developing Pt-free non-precious efficient ORR electrocatalysts in fuel cells.

Multi-walled carbon nanotube and carbide-derived carbon supported metal phthalocyanines as cathode catalysts for microbial fuel cell applications

Metal phthalocyanine (CoPc and FePc) modified MWCNT or CDC materials were explored as superior cathode catalysts for MFC technology.