Freestanding nitrogen-doped d-Ti3C2/reduced graphene oxide hybrid films for high performance supercapacitors

Unraveling the Ionic Storage Mechanism of Flexible Nitrogen-Doped MXene Films for High-Performance Aqueous Hybrid Supercapacitors

2D MXene nanomaterials have excellent potential for application in novel electrochemical energy storage technologies such as supercapacitors and batteries, but the existing pure MXene is difficult to meet the practical needs. Although the electrochemical properties of modified MXene have been improved, the unclear ion storage mechanism still hinders the development of MXene-based electrode materials. Herein, the study develops flexible self-supported nitrogen-doped Ti3C2 (Py-Ti3C2) films by the highly mobile, high nitrogen content, oxygen-free pyridine-assisted solvothermal method, and then deeply investigates the energy storage mechanism of hybrid supercapacitors in four aqueous electrolytes (H2SO4, Li2SO4, Na2SO4, and MgSO4). The experimental results suggest that the Py-Ti3C2 film electrode exhibits a pseudocapacitance-dominated energy storage mechanism. Particularly, the specific capacity of the Py-Ti3C2 in 1 M H2SO4 (506 F g-1 at 0.1 A g-1) is 4-5 times higher than other electrolytes (≈110 F g-1), which could be attributed to the substantially higher ionic diffusion coefficient of H+ than those of Li+, Na+, Mg2+ with small ionic size, high ionic conductivity, and fast pseudocapacitance response. Theoretical analysis further confirms that Py-Ti3C2 has strengthened conductivity and electrical double-layer capacitance performance. Meanwhile, it has lower free energy for protonation and deprotonation of functional groups, which gives excellent pseudocapacitance performance.

Molten salt-shielded synthesis of Ti3AlC2 as a precursor for large-scale preparation of Ti3C2Tx MXene binder-free film electrode supercapacitors

MXenes are a group of two-dimensional materials that are promising for many applications, including as film electrode supercapacitors. When synthesizing such materials, special attention is paid to the conditions for obtaining the MAX phase, the chemical, morphological and structural features of which determine the functional properties of the final product. In this study, the Ti3AlC2 precursor is proposed to be obtained using a technologically simple and accessible method of synthesis in molten salt. This method allows reducing the reaction temperature and creating an antioxidant atmosphere. Ti3C2Tx MXene electrode films are produced by the easily scalable blade coating method without a binder. The synthesized materials were studied by X-ray phase analysis and scanning electron microscopy. Electrochemical testing of Ti3C2Tx film electrodes was carried out in a three-electrode configuration in aqueous solutions of 1M H2SO4, 6M KOH, 1M LiOH and 1M Na2SO4 electrolytes. The maximum specific capacity value for Ti3C2Tx MXene binder-free film electrode supercapacitors is obtained in 1M H2SO4 electrolyte (480 F g-1 at a scan rate of 1 mV s-1). The simple, low-cost and scalable production technology and promising electrochemical characteristics of the Ti3C2Tx MXene binder-free film electrode make it an excellent candidate for new-generation supercapacitors.

NH3-Induced In Situ Etching Strategy Derived 3D-Interconnected Porous MXene/Carbon Dots Films for High Performance Flexible Supercapacitors

2D MXene (Ti3CNTx) has been considered as the most promising electrode material for flexible supercapacitors owing to its metallic conductivity, ultra-high capacitance, and excellent flexibility. However, it suffers from a severe restacking problem during the electrode fabrication process, limiting the ion transport kinetics and the accessibility of ions in the electrodes, especially in the direction normal to the electrode surface. Herein, we report a NH3-induced in situ etching strategy to fabricate 3D-interconnected porous MXene/carbon dots (p-MC) films for high-performance flexible supercapacitor. The pre-intercalated carbon dots (CDs) first prevent the restacking of MXene to expose more inner electrochemical active sites. The partially decomposed CDs generate NH3 for in situ etching of MXene nanosheets toward 3D-interconnected p-MC films. Benefiting from the structural merits and the 3D-interconnected ionic transmission channels, p-MC film electrodes achieve excellent gravimetric capacitance (688.9 F g-1 at 2 A g-1) and superior rate capability. Moreover, the optimized p-MC electrode is assembled into an asymmetric solid-state flexible supercapacitor with high energy density and superior cycling stability, demonstrating the great promise of p-MC electrode for practical applications.

Integration of high visible-light-driven ternary dual Z-scheme AgVO3-InVO4/g-C3N4 heterojunction nanocomposite for enhanced uranium(VI) photoreduction separation

With deepening application of nuclear power technology, the problem of water ecological environment pollution caused by uranium (U(VI)) is becoming increasingly serious. Photoreduction separation of U(VI) on photocatalysts is considered as an effective strategy to solve uranium pollution. In this work, a novel ternary dual Z-scheme AgVO3-InVO4/g-C3N4 heterojunction (Z-AIGH) nanocomposite with high surface area (73.45 m2 g-1, Z-AIGH2) was designed. The batch adsorption experiment in dark environment showed that Z-AIGH2 nanocomposite had an excellent U(VI) adsorption performance. As for photocatalytic experiments, Z-AIGH2 exhibited a rapid photocatalytic response for separating U(VI) without any organic sacrifice agents. The U(VI) separation rate on Z-AIGH2 nanocomposite was over 98.7% after only 20.0 min visible light irradiation (T = 298 K, CU(Ⅵ) = 10.0 mg L-1, m/V = 0.1 g L-1 and pH = 7.0). Z-AIGH2 nanocomposite also showed good selectivity and cycle stability. The U(VI) removal rate of Z-AIGH2 nanocomposite after fifth cycles was about 96.1% (T = 298 K, CU(Ⅵ) = 10.0 mg L-1, m/V = 0.1 g L-1 and pH = 7.0). High photocatalytic activity of Z-AIGH2 for U(VI) was attributed to the construction of ternary dual Z-scheme heterojunction structure and ant nest-like hole structure. Based on above results, Z-AIGH2 nanocomposite had great potential for water environment renovation.

Current Trends in Nanomaterials-Based Electrochemiluminescence Aptasensors for the Determination of Antibiotic Residues in Foodstuffs: A Comprehensive Review

Veterinary pharmaceuticals have been recently recognized as newly emerging environmental contaminants. Indeed, because of their uncontrolled or overused disposal, we are now facing undesirable amounts of these constituents in foodstuff and its related human health concerns. In this context, developing a well-organized environmental and foodstuff screening toward antibiotic levels is of paramount importance to ensure the safety of food products as well as human health. In this case, with the development and progress of electric/photo detecting, nanomaterials, and nucleic acid aptamer technology, their incorporation-driven evolving electrochemiluminescence aptasensing strategy has presented the hopeful potentials in identifying the residual amounts of different antibiotics toward sensitivity, economy, and practicality. In this context, we reviewed the up-to-date development of ECL aptasensors with aptamers as recognition elements and nanomaterials as the active elements for quantitative sensing the residual antibiotics in foodstuff and agriculture-related matrices, dissected the unavoidable challenges, and debated the upcoming prospects.

Recent Advances in Two-Dimensional MXene for Supercapacitor Applications: Progress, Challenges, and Perspectives

MXene is a type of two-dimensional (2D) transition metal carbide and nitride, and its promising energy storage materials highlight its characteristics of high density, high metal-like conductivity, tunable terminals, and charge storage mechanisms known as pseudo-alternative capacitance. MXenes are a class of 2D materials synthesized by chemical etching of the A element in MAX phases. Since they were first discovered more than 10 years ago, the number of distinct MXenes has grown substantially to include numerous M_nX_n-1 (n = 1, 2, 3, 4, or 5), solid solutions (ordered and disordered), and vacancy solids. To date, MXenes used in energy storage system applications have been broadly synthesized, and this paper summarizes the current developments, successes, and challenges of using MXenes in supercapacitors. This paper also reports the synthesis approaches, various compositional issues, material and electrode topology, chemistry, and hybridization of MXene with other active materials. The present study also summarizes MXene's electrochemical properties, applicability in pliant-structured electrodes, and energy storage capabilities when using aqueous/non-aqueous electrolytes. Finally, we conclude by discussing how to reshape the face of the latest MXene and what to consider when designing the next generation of MXene-based capacitors and supercapacitors.

Novel composite of Zn/Ti-layered double hydroxide coupled with MXene for the efficient photocatalytic degradation of pharmaceuticals

In the present study, a hybrid photocatalyst of Zn/Ti layered double hydroxide (LDH) coupled with MXene - Ti₃C₂ was synthesized for the first time and applied in photocatalytic degradation of acetaminophen and ibuprofen, two commonly present in the natural environment and prone to accumulate in the aquatic ecosystem pharmaceuticals. The effect of MXene content (0.5 wt%, 2.5 wt%, and 5 wt%) on the photocatalytic activity of LDH/MXene composite was investigated. The composite of LDH/MXene containing 2.5 wt% of MXene revealed the highest photocatalytic activity in the degradation of acetaminophen (100% within 40 min) and ibuprofen (99.7% within 60 min). Furthermore, an improvement in acetaminophen and ibuprofen mineralization was observed for the composite material. Meanwhile, the introduction of interfering ions (Na⁺, Ca²⁺, Mg²⁺, Cl^-, SO₄^2-) in the model seawater did not affect the removal efficiency of both pharmaceuticals. The photocatalytic experiment performed in the four subsequent cycles, as well as FTIR, TEM, and XPS analyses after the photodegradation process confirmed the excellent stability and reusability of the prepared composite material. In order to evaluate the effect of various reactive oxidizing species (ROS) on the photocatalytic process, the trapping experiment was applied. It was noticed that •O₂^- had the main contribution in photocatalytic degradation of acetaminophen, while •OH and h⁺ mainly affected the degradation of ibuprofen. Finally, based on the results of Mott Schottky analysis, bandgap calculation, and ROS trapping experiment, the possible mechanism for pharmaceuticals degradation was proposed. This research illustrates the feasibility and novelty of the treatment of pharmaceuticals by LDH/MXene composites, implying that MXene plays a significant role in the electron-hole separation and thus high photocatalytic activity.

A Ti3C2Tx-Based Composite as Separator Coating for Stable Li-S Batteries

The nitrogen-doped MXene carbon nanosheet-nickel (N-M@CNi) powder was successfully prepared by a combined process of electrostatic attraction and annealing strategy, and then applied as the separator coating in lithium-sulfur batteries. The morphology and structure of the N-M@CNi were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectrum, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption method. The strong LiPS adsorption ability and high conductivity are associated with the N-doped carbon nanosheet-Ni modified surface. The modified separator offers the cathode of Li-S cell with greater sulfur utilization, better high-rate adaptability, and more stable cycling performance compared with the pristine separator. At 0.2 C the cell with N-M@CNi separator delivers an initial capacity of 1309 mAh g^-1. More importantly, the N-M@CNi separator is able to handle a cathode with 3.18 mg cm^-2 sulfur loading, delivering a capacity decay rate of 0.043% with a high capacity retention of 95.8%. Therefore, this work may provide a feasible approach to separator modification materials towards improved Li-S cells with improved stability.

Sandwich-like MXene/α-Fe2O3-C-MoS2-PEDOT:PSS/MXene Film Electrodes with Ultrahigh Area Capacitance for Flexible Supercapacitors

The restacking of the MXene film limits its development to the high energy density of flexible supercapacitors. In order to promote the application of MXene films in portable electronic devices and miniaturized energy storage devices, it is necessary to increase the area capacitance of MXene films for the pursuit of high energy density. The introduction of α-Fe₂O₃-C-MoS₂-PEDOT:PSS (FMP) into MXene significantly increases the area capacitance. Considering the large number of active sites on the surface of MXene and its excellent hydrophilicity, FMP can be well-compounded with MXene, and the accumulation and loss of FMP can be prevented. Meanwhile, it can reduce the performance degradation caused by the accumulation of MXene's own structure and greatly increase its capacitance value. It is worth mentioning that the MXene/FMP/MXene (M/FMP/M) sandwich structure on the carbon cloth is reasonably designed to show excellent performance. Therefore, the best M/FMP/M electrode could attain a breakthrough in the area capacitance (2700 mF cm^-2 and 541 F g^-1). At the same time, the electrode maintains a fine rate capability and fabulous flexibility. In addition, the symmetrical supercapacitors also show a significant energy density of 371 μW h cm^-2 (12.36 W h·kg^-1), making this sandwich structure electrode a promising candidate for high-energy-density devices.

Ultrasensitive near-infrared aptasensor for enrofloxacin detection based on wavelength tunable AgBr nanocrystals electrochemiluminescence emission triggered by O-terminated Ti3C2 MXene

Toxic-free and easily accessible electrochemiluminescence (ECL) emitter/luminophore with near-infrared (NIR) emission is highly anticipated for ECL biosensor evolution. In this study, well-dispersed AgBr nanocrystals (NCs) decorated Ti₃C₂ MXene nanocomposites (Ti₃C₂-AgBrNCs) were prepared using a simple wet chemical technique and demonstrated highly efficient NIR ECL emission. For the first time, Ti₃C₂-AgBrNCs displayed wavelength-tunable ECL emission with varied Ti₃C₂ contents. Interestingly, further experimental data revealed that the ECL emission wavelength of Ti₃C₂-AgBrNCs red-shifted from 550 to 665 nm as Ti₃C₂ content increased, which can be attributed to the surface-defect effect generated by the oxygen-containing functional groups in Ti₃C₂ MXene. In particular, the ECL emission at 665 nm of Ti₃C₂-AgBrNCs nanocomposites not only revealed a 3.5 times increased ECL intensity but also a more stable ECL signal compared to pure AgBr NCs. As a proof of concept, a direct-type NIR ECL aptasensor with signal-on strategy was constructed with the Ti₃C₂-AgBrNCs nanocomposites as an ECL platform and enrofloxacin (ENR) as a model analyte. The NIR ECL aptasensor exhibited high sensitivity, a wide linear range from 1.0 × 10^-12 mol/L to 1.0 × 10^-6 mol/L and a low detection limit (5.97 × 10^-13 mol/L). This research offered a viable alternative way for producing toxic-free and efficient near-infrared ECL luminophores in bioanalysis and wavelength-tuning light-emitting devices.

Plasmonic Enhancement in Water Splitting Performance for NiFe Layered Double Hydroxide-N10 TC MXene Heterojunction

MXene-based material has attracted wide attention due to its tunable band gap, high conductivity and impressive optical and plasmonic properties. Herein, a hetero-nanostructured water splitting system was developed based on N-doped Ti₃ C₂ (N₁₀ TC) MXene and NiFe layered double hydroxide (LDH) nanosheets. The oxygen evolution reaction performance of the NiFe-LDH significantly enhanced to approximately 8.8-fold after incorporation of N₁₀ TC. Meanwhile, the Tafel slope was only 58.1 mV dec^-1 with light irradiation, which is lower than pure NiFe-LDH nanosheets (76.9 mV dec^-1 ). All results manifested the vital role of the N₁₀ TC MXene induced plasmonic hot carriers via electrophoto-excitation in enhancing the full water splitting performance of the as-prepared system. This work is expected to provide a platform for designing various plasmonic MXenes-based heterogeneous structures for highly efficient catalytic applications.

Hetero-MXenes: Theory, Synthesis, and Emerging Applications

Since their discovery in 2011, MXenes (abbreviation for transition metal carbides, nitrides, and carbonitrides) have emerged as a rising star in the family of 2D materials owing to their unique properties. Although the primary research interest is still focused on pristine MXenes and their composites, much attention has in recent years been paid also to MXenes with diverse compositions. To this end, this work offers a comprehensive overview of the progress on compositional engineering of MXenes in terms of doping and substituting from theoretical predictions to experimental investigations. Synthesis and properties are briefly introduced for pristine MXenes and then reviewed for hetero-MXenes. Theoretical calculations regarding the doping/substituting at M, X, and T sites in MXenes and the role of vacancies are summarized. After discussing the synthesis of hetero-MXenes with metal/nonmetal (N, S, P) elements by in situ and ex situ strategies, the focus turns to their emerging applications in various fields such as energy storage, electrocatalysts, and sensors. Finally, challenges and prospects of hetero-MXenes are addressed. It is anticipated that this review will be beneficial to bridge the gap between predictions and experiments as well as to guide the future design of hetero-MXenes with high performance.

Synergism of 1D/2D boride/MXene nanosheet heterojunctions for boosted overall water splitting

Transition metal boride (TMB) as a new type of catalyst has attracted much attention in recent years.

Enhancing Capacitance Performance of Ti3C2Tx MXene as Electrode Materials of Supercapacitor: From Controlled Preparation to Composite Structure Construction

Ti3C2Tx, a novel two-dimensional layer material, is widely used as electrode materials of supercapacitor due to its good metal conductivity, redox reaction active surface, and so on. However, there are many challenges to be addressed which impede Ti3C2Tx obtaining the ideal specific capacitance, such as restacking, re-crushing, and oxidation of titanium. Recently, many advances have been proposed to enhance capacitance performance of Ti3C2Tx. In this review, recent strategies for improving specific capacitance are summarized and compared, for example, film formation, surface modification, and composite method. Furthermore, in order to comprehend the mechanism of those efforts, this review analyzes the energy storage performance in different electrolytes and influencing factors. This review is expected to predict redouble research direction of Ti3C2Tx materials in supercapacitors.