Enhanced cycle performance of hierarchical porous sphere MnCo2O4 for asymmetric supercapacitors

The catalytic efficacy of modified manganese-cobalt oxides for room-temperature oxidation of formaldehyde in air

Formaldehyde (FA) is a hazardous indoor air pollutant with carcinogenic propensity. Oxidation of FA in the dark at low temperature (DLT) is a promising strategy for its elimination from indoor air. In this light, binary manganese-cobalt oxide (0.1 to 5 mol L-1-MnCo2O4) is synthesized and modified in an alkaline medium (0.1-5 mol L-1 potassium hydroxide) for FA oxidation under room temperature (RT) conditions. Accordingly, 1-MnCo2O4 achieves 100 % FA conversion at RT (50 ppm and 7022 h-1 gas hourly space velocity (GHSV)). The catalytic activity of 1-MnCo2O4 is assessed further as a function of diverse variables (e.g., catalyst mass, relative humidity, FA concentration, molecular oxygen (O2) content, flow rate, and time on-stream). In situ diffuse reflectance infrared Fourier-transform spectroscopy confirms that FA molecules are adsorbed onto the active surface sites of 1-MnCo2O4 and oxidized into water (H2O) and carbon dioxide (CO2) through dioxymethylene (DOM) and formate (HCOO-) as the reaction intermediates. According to the density functional theory simulations, the higher catalytic activity of 1-MnCo2O4 can be attributed to the combined effects of its meritful surface properties (e.g., the firmer attachment of FA molecules, lower energy cost of FA adsorption, and lower desorption energy for CO2 and H2O). This work is the first report on the synthesis of alkali (KOH)-modified MnCo2O4 and its application toward the FA oxidative removal at RT in the dark. The results of this study are expected to provide valuable insights into the development of efficient and cost-effective non-noble metal catalysts against indoor FA at DLT.

Simultaneous measurement of trace dimethyl methyl phosphate and temperature using all fiber Michaelson interferometer cascaded FBG

All fiber Michaelson interferometer cascaded fiber Bragg grating (FBG) sensor for simultaneous measurement of trace dimethyl methyl phosphate and temperature is proposed. One end of the four-core fiber (FCF) is spliced with a multimode fiber (MMF), the other end is flattened and evaporated with silver film to enhance reflection, and the Michelson interference structure is formed. The grating is engraved in the single-mode fiber (SMF) core and spliced with MMF, then the Michelson interference cascaded FBG, FBG-MMF-FCF sensor is obtained. The sensing film, MnCo₂O₄ is coated on the surface of FCF, and the structure, elemental composition and morphology of MnCo₂O₄ were analyzed by X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. The sensitivity and the detection limit of DMMP are 86.44 dB/ppm and 0.1767 ppb, respectively. The response/recovery time is about 14/10 s. the temperature sensitivity can be compensated and calculated as 0.069 nm/°C. The sensor has good selectivity and stability, and has a good application prospect in high sensitivity detection of trace DMMP vapor.

MnCo2O4/Ni3S4 nanocomposite for hybrid supercapacitor with superior energy density and long-term cycling stability

MnCo₂O₄ is regarded as a good electrode material for supercapacitor due to its high specific capacity and good structural stability. However, its poor electrical conductivity limits its wide-range applications. To solve this issue, we integrated the MnCo₂O₄ with Ni₃S₄, which has a good electrical conductivity, and synthesized a MnCo₂O₄/Ni₃S₄ nanocomposite using a two-step hydrothermal process. Comparing with individual MnCo₂O₄ and Ni₃S₄, the MnCo₂O₄/Ni₃S₄ nanocomposite showed a higher specific capacity and a better cycling stability as the electrode for the supercapacitor. The specific capacity value of the MnCo₂O₄/Ni₃S₄ electrode was 904.7 C g^-1 at 1 A g^-1 with a potential window of 0-0.55 V. A hybrid supercapacitor (HSC), assembled using MnCo₂O₄/Ni₃S₄ and active carbon as the cathode and anode, respectively, showed a capacitance of 116.4 F g^-1 at 1 A g^-1, and a high energy density of 50.7 Wh kg^-1 at 405.8 W kg^-1. Long-term electrochemical stability tests showed an obvious increase of the HSC's capacitance after 5500 charge/discharge cycles, reached a maximum value of ∼162.7% of its initial value after 25,000 cycles, and then remained a stable value up to 64,000 cycles. Simultaneously, its energy density was increased to 54.2 Wh kg^-1 at 380.3 W kg^-1 after 64,000 cycles.

Control of the interface graphitized/amorphous carbon of biomass-derived carbon microspheres for symmetric supercapacitors

Rational interface control of porous carbon electrode materials is of significance for achieving efficient supercapacitors. Herein, biomass-derived carbon microspheres with a highly graphitized porous surface and amorphous subsurface were well constructed via a flexible coupled catalysis-activation process. The unique structure not only endows the carbon microspheres with rapid electron transfer but also an ultra-high specific surface area. Owing to the optimized graphitized/amorphous structure, the obtained graphitized and activated starch-derived carbon microspheres display obviously impressive energy storage capability among the reported starch-derived carbon materials, even though they were evaluated in a narrow voltage window. The assembled symmetrical supercapacitor based on the optimized carbon microspheres exhibits a high capacitance of 198 F g^-1 at 1 A g^-1, a high energy density of 14.67 W h kg^-1 at a power density of 4142.80 W kg^-1, robust cycle performance, and good rate performance in alkaline aqueous electrolyte. This work provides a strategy for flexible construction of biomass-derived carbon electrode materials, with an optimized graphitized/amorphous and porous structure, for boosted energy storage in supercapacitor applications.

Uniform MnCo2O4.5 porous nanowires and quasi-cubes for hybrid supercapacitors with excellent electrochemical performances

In this work, uniform MnCo2O4.5 nanowires (NWs) on stainless steel foil (SSF) were prepared through a facile, cost-efficient, and eco-friendly hydrothermal method at 120 °C with a post-calcination process in air. The microstructure of MnCo2O4.5 samples could be tuned at different hydrothermal temperatures and quasi-cubes (QCs) were obtained in high yield at 150 °C. The MnCo2O4.5 NW powder peeled off from the SSF delivered an outstanding capacity of 248.62 C g-1 at 1 A g-1 with a capacity preservation of 179.43 C g-1 at 8 A g-1, while the QCs exhibited 177.19 and 111.73 C g-1, respectively. To assess the possibility of its actual applications, a hybrid supercapacitor (HSC) device has been assembled by utilizing these MnCo2O4.5 NWs (QCs) and activated carbon (AC) as the cathode and anode, respectively. The MnCo2O4.5 NWs//AC HSC delivered a maximum capacity up to 116.95 C g-1 and extraordinary cycling durability with only 3.56% capacity loss over 5000 cycles. Besides, the MnCo2O4.5 NWs//AC HSC achieved a maximum energy density of 25.41 W h kg-1 at a power density of 782.08 W kg-1, and for the QC-based HSC, it showed a lower energy density of 20.54 W h kg-1 at 843.34 W kg-1. These remarkable electrochemical properties demonstrate that the porous MnCo2O4.5 NWs and QCs may serve as promising cathodes for advanced hybrid supercapacitors with superior performance, and the present synthetic methodology may be applied to the preparation of other cobalt-based binary metal oxides with excellent electrochemical properties.

Transition Metal Oxide Electrode Materials for Supercapacitors: A Review of Recent Developments

In the past decades, the energy consumption of nonrenewable fossil fuels has been increasing, which severely threatens human life. Thus, it is very urgent to develop renewable and reliable energy storage devices with features of environmental harmlessness and low cost. High power density, excellent cycle stability, and a fast charge/discharge process make supercapacitors a promising energy device. However, the energy density of supercapacitors is still less than that of ordinary batteries. As is known to all, the electrochemical performance of supercapacitors is largely dependent on electrode materials. In this review, we firstly introduced six typical transition metal oxides (TMOs) for supercapacitor electrodes, including RuO₂, Co₃O₄, MnO₂, ZnO, XCo₂O₄ (X = Mn, Cu, Ni), and AMoO₄ (A = Co, Mn, Ni, Zn). Secondly, the problems of these TMOs in practical application are presented and the corresponding feasible solutions are clarified. Then, we summarize the latest developments of the six TMOs for supercapacitor electrodes. Finally, we discuss the developing trend of supercapacitors and give some recommendations for the future of supercapacitors.

Construction of hierarchical sea urchin-like manganese substituted nickel cobaltite@tricobalt tetraoxide core-shell microspheres on nickel foam as binder-free electrodes for high performance supercapacitors

Construction of binder-free electrodes with hierarchical core-shell nanostructures is considered to be an effective route to promote the electrochemical performance of supercapacitors. In this work, the porous Ni_0.5Mn_0.5Co₂O₄ nanoflowers anchored on nickel foam are utilized as framework for further growing Co₃O₄ nanowires, resulting in the hierarchical sea urchin-like Ni_0.5Mn_0.5Co₂O₄@Co₃O₄ core-shell microspheres on nickel foam. Owing to the advantages brought by unique porous architecture and synergistic effect of the multi-component composites, the as-prepared electrode exhibits a high specific capacitance (931 F/g at 1 A/g), excellent rate performance (77% capacitance retention at 20 A/g) and outstanding cycle stability (92% retention over 5000 cycles at 5 A/g). Additionally, the assembled Ni_0.5Mn_0.5Co₂O₄@Co₃O₄//AC (activated carbon) asymmetric supercapacitor achieves a high energy density (50 Wh/kg at 750 W/kg) and long durability (88% retention after 5000 cycles).

A free-standing manganese cobalt sulfide@cobalt nickel layered double hydroxide core-shell heterostructure for an asymmetric supercapacitor

Rational design of self-supported electrode materials is important to develop high-performance supercapacitors. Herein, a free-standing MnCo₂S₄@CoNi LDH (MCS@CN LDH) core-shell heterostructure is successfully prepared on Ni foam using the hydrothermal reaction and electrodeposition. In this architecture, the inner MnCo₂S₄ nanotube provides an ultra-high electrical conductivity and the CoNi LDH nanosheets can offer more electrochemical active sites for better faradaic reactions. Moreover, the core-shell heterostructure can also maintain the structural integrity during the processes of continuous charge/discharge. The MCS@CN LDH electrode displays a satisfactory specific capacitance of 1206 C g^-1 and excellent cycling performance with ∼92% retention after 10 000 cycles. In addition, an asymmetric supercapacitor (ASC), in which MCS@CN LDH and N-doped rGO are used as the positive electrode and the negative electrode, was assembled which exhibits an energy density of 48.8 W h kg^-1 with superior cycling stability, indicating the potential of this electrode in practical energy storage.

Asymmetric supercapacitor of functionalised electrospun carbon fibers/poly(3,4-ethylenedioxythiophene)/manganese oxide//activated carbon with superior electrochemical performance

Asymmetric supercapacitors (ASC) have shown a great potential candidate for high-performance supercapacitor due to their wide operating potential which can remarkably enhance the capacitive behaviour. In present work, a novel positive electrode derived from functionalised carbon nanofibers/poly(3,4-ethylenedioxythiophene)/manganese oxide (f-CNFs/PEDOT/MnO₂) was prepared using a multi-step route and activated carbon (AC) was fabricated as a negative electrode for ASC. A uniform distribution of PEDOT and MnO₂ on f-CNFs as well as porous granular of AC are well-observed in FESEM. The assembled f-CNFs/PEDOT/MnO₂//AC with an operating potential of 1.6 V can achieve a maximum specific capacitance of 537 F/g at a scan rate of 5 mV/s and good cycling stability (81.06% after cycling 8000 times). Furthermore, the as-prepared ASC exhibited reasonably high specific energy of 49.4 Wh/kg and low charge transfer resistance (R_ct) of 2.27 Ω, thus, confirming f-CNFs/PEDOT/MnO₂//AC as a promising electrode material for the future energy storage system.

Construction of ZnCo2S4@Ni(OH)2 core–shell nanostructures for asymmetric supercapacitors with high energy densities

ZnCo₂S₄ nanoneedle clusters are uniformly grown as a core on foamed nickel and then are coated with Ni(OH)₂ nanosheets as shell layers.