Systematic study on hybrid supercapacitor of Ni-Co layered double hydroxide//activated carbons

The Mass-Balancing between Positive and Negative Electrodes for Optimizing Energy Density of Supercapacitors

Supercapacitors (SCs) are some of the most promising energy storage devices, but their low energy density is one main weakness. Over the decades, superior electrode materials and suitable electrolytes have been widely developed to enhance the energy storage ability of SCs. Particularly, constructing asymmetric supercapacitors (ASCs) can extend their electrochemical stable voltage windows (ESVWs) and thus achieve high energy density. However, only full utilization of the electrochemical stable potential windows (ESPWs) of both positive and negative electrodes can endow the ASC devices with a maximum ESVW by using a suitable mass-ratio between two electrodes (the mass-balancing). Nevertheless, insufficient attention is directed to mass-balancing, and even numerous misunderstandings and misuses have appeared. Therefore, in this Perspective, we focus on the mass-balancing: summarize theoretic basis of the mass-balancing, derive relevant relation equations, analyze and discuss the change trends of the specific capacitance and energy density of ASCs with mass-ratios, and finally recommend some guidelines for the normative implementation of the mass-balancing. Especially, the issues related to pseudocapacitive materials, hybrid devices, and different open circuit potentials (OCPs) of the positive and negative electrodes in the mass-balancing are included and emphasized. These analyses and guidelines can be conducive to understanding and performing mass-balancing for developing high-performance SCs.

Constructing a 3D Ion Transport Channel-Based CNF Composite Film with an Intercalated Structure for Superior Performance Flexible Supercapacitors

The weak stiffness, huge thickness, and low specific capacitance of commonly utilized flexible supercapacitors hinder their great electrochemical performance. Learning from a biomimetic interface strategy, we design flexible film electrodes based on functional intercalated structures with excellent electrochemical properties and mechanical flexibility. A composite film with high strength and flexibility is created using graphene (reduced graphene oxide (rGO)) as the plane layer, layered double metal hydroxide (LDH) as the support layer, and cellulose nanofiber (CNF) as the connection agent and flexible agent. The interlayer height can be adjusted by the ion concentration. The highly interconnected network enables excellent electron and ion transport channels, facilitating rapid ion diffusion and redox reactions. Moreover, the high flexibility and mechanical properties of the film achieve multiple folding and bending. The CNF-rGO-NiCoLDH film electrode exhibits high capacitance performance (3620.5 mF cm-2 at 2 mA cm-2), excellent mechanical properties, and high flexibility. Notably, flexible all-solid assembled CNF-rGO-NiCoLDH//rGO has an extremely high area energy density of 53.5 mWh cm-2 at a power density of 1071.2 mW cm-2, along with cycling stability of 89.8% retention after 10 000 charge-discharge cycles. This work provides a perspective for designing high-performance energy storage materials for flexible electronics and wearable devices.

Porous 3D columnar-sphere of NiO nanomaterials synthesized for supercapacitors via hydrothermal route: impact of thiourea concentration

The charge storage application has witnessed a dramatic increase in terms of the short charge-discharge time of supercapacitors, specifically in highly active electrode materials. For charge storage supercapacitor applications, highly porous materials are preferable. In this research article, thiourea acts as a leaving agent in the preparation of the porous 3D spherical architecture of NiO nanomaterials. The influence of the molar concentration of thiourea on structural, morphological, and electrochemical charge storage applications has been studied. X-ray diffraction reveals a cubic structure with Fm3̄m space group for the NiO nanomaterials. The scanning electron microscopy (SEM) images show the porous 3D columnar spherical structure, and FTIR has been used for the optical analysis of the NiO materials. The 1D-3D columnar-spherical structure of the NiO flakes exhibits a high electrochemical charge storage pseudocapacitive nature. The optimized 0.40 M thiourea-NiO (Th-NiO) nanomaterial is highly hydrophilic, exhibiting a maximum specific capacity of 171.1 mA h g-1 at 5 mV s-1 by CV and 148.5 mA h g-1 at 0.2 mA cm-2 by GCD. The highest power, energy densities are 0.96 kW kg-1 and 6.66 W h kg-1 with the highest charge-discharge cycle rating of 92% up to 5000 cycles of the asymmetric NiO//rGO hybrid supercapacitor device.

Concave Ni(OH)2 Nanocube Synthesis and Its Application in High-Performance Hybrid Capacitors

The controlled synthesis of hollow structure transition metal compounds has long been a very interesting and significant research topic in the energy storage and conversion fields. Herein, an ultrasound-assisted chemical etching strategy is proposed for fabricating concave Ni(OH)2 nanocubes. The morphology and composition evolution of the concave Ni(OH)2 nanocubes suggest a possible formation mechanism. The as-synthesized Ni(OH)2 nanostructures used as supercapacitor electrode materials exhibit high specific capacitance (1624 F g-1 at 2 A g-1) and excellent cycling stability (77% retention after 4000 cycles) due to their large specific surface area and open pathway. In addition, the corresponding hybrid capacitor (Ni(OH)2//graphene) demonstrates high energy density (42.9 Wh kg-1 at a power density of 800 W kg-1) and long cycle life (78% retention after 4000 cycles at 5 A g-1). This work offers a simple and economic approach for obtaining concave Ni(OH)2 nanocubes for energy storage and conversion.

Elucidating an efficient super-capacitive response of a Sr2Ni2O5/rGO composite as an electrode material in supercapacitors

Mixed transition metal oxides have emerged as efficient electrode materials because of their significant cycling stability, and superior capacitance values, resulting in remarkable electrochemical outputs. In this regard, Sr2Ni2O5/rGO composites were synthesized using a facile solvothermal method to achieve efficient electrochemical pursuits. X-ray diffraction confirmed the formation of finely crystallized samples with the phase evolution from orthorhombic to hexagonal. Morphological studies using field emission scanning electron microscopy depicted the desired porosity in samples with well-defined shapes and sizes of homogeneously distributed grains. Elemental analysis verified the pictorial depiction of sample compositions in terms of their stoichiometric ratios. The composite sample with composition Sr2Ni2O5@15%rGO exhibited superior electrochemical performance compared to other samples, depicting the highest specific capacitance of 148.09 F g-1 at a lower scan rate of 0.005 V s-1 observed via cyclic voltammetry. In addition, the cyclability performance of Sr2Ni2O5@15%rGO exhibits 68.5% capacitive retention after 10 000 cycles. The energy density as determined using a two-electrode system remained 4.375 W h kg-1 for the first cycle which reduced to 1.875 W h kg-1 for the 10 000th cycle, with a maximum power density of 1.25 W kg-1. The Nyquist plot represented less barrier to charge transfer. The electrode with particular composition Sr2Ni2O5@15%rGO emerged as significant, exhibiting a superior surface capacitive charge storage, that makes it a potential candidate as an electrode material.

NiFe-Coordination Polymers-Derived Layered Double Hydroxides as Bifunctional Materials: Effect of the Ni : Fe Ratio on the Electrochemical Performance

The development of an efficient and cost-effective material is highly desirable for electrochemical devices such as electrolyzers and supercapacitors. Especially, pseudomorphic transformations of metal-organic frameworks (MOFs)/coordination polymers (CPs) into layered double hydroxides (LDHs) materials endow well-defined porosities, high surface area, exchangeable interlayer anions and easily adjustable electronic structure that are truly required for oxygen evolution reaction (OER) and high-performance supercapacitor applications. Herein, we have prepared NiFe-LDHs of various Ni/Fe ratios via a facile room-temperature alkaline hydrolysis of NiFe-CPs precursors. Electrochemical studies reveal that the catalyst having high amount of Fe (Ni1.2 Fe1 -LDH) showed the better OER activity with a low Tafel slope (65 mV dec-1 ) in 1 M KOH. On the other hand, the catalyst containing higher amount of Ni with better layered structure (Ni11.7 Fe1 -LDH) showed high performance for supercapacitor (702 F g-1 at 0.25 A g-1 ) in 3 M KOH. Moreover, a solid-state asymmetric supercapacitor device Ni11.7 Fe1 -LDH/AC was fabricated which exhibited a specific capacitance of 18 F g-1 at a current density of 1 A g-1 . The device displayed high cycling stability with 88% of capacitance retention after 7000 cycles. The experimental findings in this work will help in the futuristic development of NiFe-LDH based electrocatalysts for the enhanced electrochemical performances.

Electrochemical capacitance properties of pre-sodiated manganese oxide for aqueous Na-ion supercapacitors

Mn-based oxides are widely investigated as electrode materials for electrochemical supercapacitors, because of their high specific capacitance in addition to the high abundance, low cost, and environmental friendliness of Mn. The pre-insertion of alkali metal ions is found to improve the capacitance properties of MnO2. While the capacitance properties of MnO2, Mn2O3, P2-Na0.5MnO2, and O3-NaMnO2etc. are reported, there is no report yet on the capacitive performance of P2-Na2/3MnO2, which has already been studied as a potential positive electrode material for Na-ion batteries. In this work, we have synthesized sodiated manganese oxide, P2-Na2/3MnO2 by a hydrothermal method followed by annealing at a high temperature of about 900 °C for 12 h. For comparison, manganese oxide Mn2O3 (without pre-sodiation) is synthesized by following the same method, but annealing at 400 °C. While P2-Na2/3MnO2 exhibits a high specific capacitance of 234 F g-1, Mn2O3 can deliver only 115 F g-1 when cycled at 0.4 A g-1 in an aqueous electrolyte of 1.0 M Na2SO4 in a three-electrode cell. An asymmetric supercapacitor Na2/3MnO2‖AC is assembled, which can exhibit a SC of 37.7 F g-1 at 0.1 A g-1 with an energy density of 20.9 W h kg-1, based on the total weight of Na2/3MnO2 and AC with an operational voltage of 2.0 V and possesses excellent cycling stability. This asymmetric Na2/3MnO2‖AC supercapacitor can be cost-effective considering the high abundance, low-cost and environmental friendliness of Mn-based oxides and aqueous Na2SO4 electrolyte.

Dual-ZIF-derived "reassembling strategy" to hollow MnCoS nanospheres for aqueous asymmetric supercapacitors

Construction of delicate nanostructures with a facile, mild-condition and economical method is a key issue for building high-performance electrode materials. We demonstrate a facile and novel "reassembling strategy" to hollow MnCoS nanospheres derived from dual-ZIF for supercapacitors. The spherical shell's surface structure, thickness and Mn distribution were controlled by regulating the solvothermal reaction time. The chemical composition, phases, specific surface areas and microstructure were studied and the electrochemical performances were systematically estimated. As the unique low-crystalline and optimized hollow nanosphere structure contributes to increasing active sites, MnCoS nanospheres exhibit excellent electrochemical performance. The test results show that the specific capacitance increases with increasing solvothermal time, and the MCS with a 5 h reaction time exhibits optimal electrochemical properties with a high specific capacity of 957 C g-1 (1 A g-1). Furthermore, an MCS-5//AC asymmetric supercapacitor device delivers a specific energy as high as 36.9 W h kg-1 at a specific power of 750 W kg-1.

Corrosion-controlled surface engineering improves the adhesion of materials for stable free-standing electrodes

Directly anchoring active materials on porous conductive substrates is considered an effective strategy to obtain a high-activity electrode since the direct contact between active materials and substrates benefits charge transfer, and the presence of porous structures provides more active sites. However, due to the presence of strong stress and weak adhesion, active materials loaded on the substrate are very easy to peel off during assembly and use, which can greatly shorten the lifetime of use. Herein, an ultrasonic corrosion strategy is proposed to regulate the surface of a metal substrate. We find that ultrasonic oxygen corrosion and interfacial water control play key roles in fabricating the complex electrode, which can help the surface of Cu foam to form special lamellar cross-linked CuO nanoarchitectures with strong adhesion and then overcome the defect of the deposited NiCo layered double hydroxides (NC LDH) on the stress and adhesion. The expected electrode shows more than 70% improvement in cycling stability at an ultra-high current density of 20 A g^-1, relative to the active material layer of the electrode with strong stress and weak adhesion. Meanwhile, benefiting from its lamellar cross-linked nanoarchitectures having large specific surface area and many nano-pores, it presents a high specific capacitance of 3010.8F g^-1 at 1 A g^-1 and a good rate capability of 59.3% at 50 A g^-1. It is foreseen that this finding provides a novel, universal strategy for managing the surface and interface of the metal substrate, thereby obtaining a reliable, stable electrode.

Sandwich-like NiCo-LDH/rGO with Rich Mesopores and High Charge Transfer Capability for Flexible Supercapacitors

Layered double metal hydroxides (LDHs) have been widely used in the energy storage field due to adjustable composition and interlayer spacing. However, easy to agglomerate, poor electrical conductivity, and large...

Designed new magnetic functional three-dimensional hierarchical flowerlike micro-nano structure of N-Co@C/NiCo-layered double oxides for highly efficient co-adsorption of multiple environmental pollutants

In order to eliminate multiple coexisting pollutants in environmental wastewater, a magnetic three-dimensional hierarchical porous flower-like N, Co-doped graphitic carbon nano-polyhedra decorated NiCo-layered double oxides (N-Co@C/NiCo-LDOs) adsorption material was synthesized, which consisted of two-dimensional LDOs nanosheets with functionalized surfaces (N, Co-doped graphitic carbon loaded on both sides of NiCo-LDOs nanosheets). The adsorption properties of N-Co@C/NiCo-LDOs for five types of typical pollutants (cationic dyes: rhodamine b, methylene blue; pesticides: ethofenprox, bifenthrin; anionic dyes: methyl orange, congo red; inorganic cations: Cr²⁺, Cd²⁺, Pb²⁺, Zn²⁺, inorganic anions: Cr₂O₇^2-, AsO₃^3-) were investigated systematically in single and coexisting systems. Combined with the results of FTIR and zeta potential, the adsorption mechanism was discussed. By virtue of its hierarchical porous architecture and the combined effect of functionalized surfaces and LODs supporter, the as-prepared N-Co@C/NiCo-LDOs demonstrates excellent adsorption performance towards five types of typical pollutants with fast adsorption rate, high adsorption capacity and good co-adsorption performance. More importantly, the N-Co@C/NiCo-LDOs showed satisfactory removal efficiency, stability and reusability in model wastewater. The broad-spectrum, rapid, easily separable, and reusable adsorption properties make N-Co@C/NiCo-LDOs promising for highly efficient wastewater treatments. This work also provides a feasible way for the preparation of adsorption materials for the treatment of complex wastewater systems.

Boosting the capacitive property of nickel cobalt aluminum layered double hydroxide in neutral electrolyte

Layered double hydroxide (LDH) has shown great potential for energy storage due to their high theoretical specific capacitance, relatively low cost and eco-friendliness. LDH, however, always works in alkali aqueous electrolyte for supercapacitors, which brings serious environmental pollution. In this work, a reduced graphite oxide/Fe(CN)₆^3-- nickel cobalt aluminum LDH (RGO/Fe(CN)₆^3--LDH) composite has been prepared via ion-exchange reaction using RGO/LDH as precursor. RGO/Fe(CN)₆^3--LDH electrode provides a specific capacitance of 221 F g^-1 in a wide potential window of -1 ~ 0.8 V vs. SCE in Na₂SO₄ aqueous electrolyte, and which is much higher than that of LDH electrode (3.56 F g^-1). Owing to the wide potential window of RGO/Fe(CN)₆^3--LDH electrode, a symmetrical solid supercapacitor device (RGO/Fe(CN)₆^3--LDH//RGO/Fe(CN)₆^3--LDH) with a high voltage of 2.0 V can deliver a high specific energy of 25.2 Wh kg^-1 at a specific power of 250 W kg^-1, and a capacitance retention of 75% after galvanostatic charging/discharging at 5 A g^-1 for 5000 times. This work supplies enlightenment for boosting the capacitive performance of LDHs in neutral electrolyte.

Hybrid structured CoNi2S4/Ni3S2 nanowires with multifunctional performance for hybrid capacitor electrodes and overall water splitting

Rational design of electrode materials plays a significant role in potential applications such as energy storage and conversion. In this work, CoNi₂S₄/Ni₃S₂ nanowires grown on Ni foam were synthesized through a facile hydrothermal approach, revealing a large capacitance of 997.2 F g⁻¹ and cycling stability with 80.3% capacitance retention after 5000 cycles. The device was prepared using CoNi₂S₄/Ni₃S₂//AC as the positive electrode and active carbon as the negative electrode, and delivered an energy density of 0.4 mW h cm⁻³ at a power density of 3.99 mW cm⁻³ and an excellent cycle life with 79.2% capacitance retention after 10 000 cycles. In addition, the hybrid CoNi₂S₄/Ni₃S₂ nanowires demonstrate excellent OER performance with low overpotential of 360 mV at 30 mA cm⁻² and overpotential of 173.8 mV at −10 mA cm⁻² for the HER, a cell voltage of 1.43 V, and excellent cycle stability.

Rational design of electrode materials plays a significant role in potential applications such as energy storage and conversion.

Controllable crystal growth of a NiCo-LDH nanostructure anchored onto KCu7S4 nanowires via a facile solvothermal method for supercapacitor application

The application of NiCo-LDHs as electrode materials for supercapacitors has attracted widespread attention.