Investigating electron transport in a PEDOT/Quinone conducting redox polymer with in situ methods

Design and characterization of electroactive gelatin methacrylate hydrogel incorporated with gold nanoparticles empowered with parahydroxybenzaldehyde and curcumin for advanced tissue engineering applications

Electroconductive polymers are the materials of interest for the fabrication of electro-conductive tissues. Metal ions through the redox systems offer polymers with electrical conductivity. In this study, we processed a gelatin methacrylate (GelMA) network with gold nanoparticles (GNPs) through a redox system with parahydroxybenzaldehyde (PHB) or curcumin to enhance its electrical conductivity. Induction of the redox system with both PHB and curcumin into the GelMA, introduced some new functional groups into the polymeric network, as it has been confirmed by H-NMR and FTIR. These new bonds resulted in higher electro-conductivity when GNPs were added to the polymer. Higher electroactivity was achieved by PHB compared to the curcumin-induced redox system, and the addition of GNPs without redox system induction showed the lowest electroactivity. MTT was used to evaluate the biocompatibility of the resultant polymers, and the PHB-treated hydrogels showed higher proliferative effects on the cells. The findings of this study suggest that the introduction of a redox system by PHB in the GelMA network along with GNPs can contribute to the electrochemical properties of the material. This electroactivity can be advantageous for tissue engineering of electro-conductive tissues like cardiac and nervous tissues.

Soft Self-Assembled Mechanoelectrical Transducer Films from Conductive Microgel Waterborne Dispersions

The present study aims in the developing of new soft transducers based on sophisticated stimuli-responsive microgels that exhibit spontaneous self-assembly forming cohesive films with conductive and mechanoelectrical properties. For that, oligo(ethylene glycol)-based stimuli-responsive microgels have been synthesized using bio-inspired catechol cross-linkers by one-step batch precipitation polymerization in aqueous media. Then, 3,4-ethylene dioxyyhiophene (EDOT) has been directly polymerized onto stimuli-responsive microgels using catechol groups as the unique dopant. PEDOT location is dependent on the cross-linking density of microgel particles and EDOT amount used. Moreover, the spontaneous cohesive film formation ability of the waterborne dispersion after evaporation at soft application temperature is demonstrated. The films obtained present conductivity and enhanced mechanoelectrical properties triggered by simple finger compression. Both properties are function of the cross-linking density of the microgel seed particles and PEDOT amount incorporated. In addition, to obtain maximum electrical potential generated and the possibility to amplify it, several films in series were demonstrated to be efficient. The present material can be a potential candidate for biomedical, cosmetic, and bioelectronic applications.

Mass and Charge Transfer in a Polymeric NiSalen Complex at Subzero Temperatures

Electrochemical energy storage systems have a wide range of commercial applications. They keep energy and power even at temperatures up to +60 °C. However, the capacity and power of such energy storage systems reduce sharply at negative temperatures due to the difficulty of counterion injection into the electrode material. The application of organic electrode materials based on salen-type polymers is a prospective approach to the development of materials for low-temperature energy sources. Poly[Ni(CH₃Salen)]-based electrode materials synthesized from different electrolytes were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and quartz crystal microgravimetry at temperatures from -40 °C to 20 °C. By analyzing data obtained in various electrolyte solutions, it was shown that at subzero temperatures, the process of injection into the polymer film, together with slow diffusion within the film, predominantly limit the electrochemical performance of electrode materials based on poly[Ni(CH₃Salen)]. It was shown that the deposition of the polymer from solutions with larger cations allow the enhancement of the charge transfer due to the formation of porous structures facilitating the counter-ion diffusion.

Nonenzymatic Lactic Acid Detection Using Cobalt Poly-phthalocyanine/Carboxylated Multiwalled Carbon Nanotube Nanocomposites Modified Sensor

In this study, a novel cobalt polyphthalocyanine/carboxylic acid functionalized multiwalled carbon nanotube nanocomposite (CoPPc/MWCNTs-COOH) to detect lactic acid was successfully fabricated. The nanocomposite was systematically characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, and X-ray photoelectron spectroscopy. The nanocomposite provided excellent conductivity for effective charge transfer and avoided the agglomeration of MWCNTs-COOH. The electrochemical surface area, diffusion coefficient and electron transfer resistance of the CoPPc/MWCNTs-COOH glassy carbon electrode (CoPPc/MWCNTs-COOH/GCE) were calculated as A = 0.49 cm2, D = 9.22 × 10−5 cm2/s, and Rct = 200 Ω, respectively. The lactic acid sensing performance of the CoPPc/MWCNTs-COOH was evaluated using cyclic voltammetry in 0.1 M PBS (pH 4). The results demonstrated that the novel electrode exhibited excellent electrochemical performance toward lactic acid reduction over a wide concentration range (10 to 240 μM), with a low detection limit (2 μM (S/N = 3)), and a reasonable selectivity against various interferents (ascorbic acid, uric acid, dopamine, sodium chloride, glucose, and hydrogen peroxide). Additionally, the electrode was also successfully applied to quantify lactic acid in rice wine samples, showing great promise for rapid monitoring applications.

Operando Characterization of Organic Mixed Ionic/Electronic Conducting Materials

Operando characterization plays an important role in revealing the structure-property relationships of organic mixed ionic/electronic conductors (OMIECs), enabling the direct observation of dynamic changes during device operation and thus guiding the development of new materials. This review focuses on the application of different operando characterization techniques in the study of OMIECs, highlighting the time-dependent and bias-dependent structure, composition, and morphology information extracted from these techniques. We first illustrate the needs, requirements, and challenges of operando characterization then provide an overview of relevant experimental techniques, including spectroscopy, scattering, microbalance, microprobe, and electron microscopy. We also compare different in silico methods and discuss the interplay of these computational methods with experimental techniques. Finally, we provide an outlook on the future development of operando for OMIEC-based devices and look toward multimodal operando techniques for more comprehensive and accurate description of OMIECs.

Macromolecular Engineering of Poly(catechol) Cathodes towards High-Performance Aqueous Zinc-Polymer Batteries

Aqueous zinc-polymer batteries (AZPBs) comprising abundant Zn metal anode and redox-active polymer (RAP) cathodes can be a promising solution for accomplishing viable, safe and sustainable energy storage systems. Though a limited number of RAPs have been successfully applied as organic cathodes in AZPBs, their macromolecular engineering towards improving electrochemical performance is rarely considered. In this study, we systematically compare performance of AZPB comprising Zn metal anode and either poly(catechol) homopolymer (named P(4VC)) or poly(catechol) copolymer (named P(4VC86-stat-SS14)) as polymer cathodes. Sulfonate anionic pendants in copolymer not only rendered lower activation energy and higher rate constant, but also conferred lower charge-transfer resistance, as well as facilitated Zn2+ mobility and less diffusion-controlled current responses compared to its homopolymer analogue. Consequently, the Zn||P(4VC86-stat-SS14) full-cell exhibits enhanced gravimetric (180 versus 120 mAh g-1 at 30 mg cm-2) and areal capacity (5.4 versus 3.6 mAh cm-2 at 30 mg cm-2) values, as well as superior rate capability both at room temperature (149 versus 105 mAh g-1 at 150 C) and at -35 °C (101 versus 35 mAh g-1 at 30 C) compared to Zn||P(4VC)100. This overall improved performance for Zn||P(4VC86-stat-SS14) is highly encouraging from the perspective applying macromolecular engineering strategies and paves the way for the design of advanced high-performance metal-organic batteries.

The effects of the chemical environment of menaquinones in lipid monolayers on mercury electrodes on the thermodynamics and kinetics of their electrochemistry

The effects of the chemical environment of menaquinones (all-trans MK-4 and all-trans MK-7) incorporated in lipid monolayers on mercury electrodes have been studied with respect to the thermodynamics and kinetics of their electrochemistry. The chemical environment relates to the composition of lipid films as well as the adjacent aqueous phase. It could be shown that the addition of all-trans MK-4 to TMCL does not change the phase transition temperatures of TMCL. In case of DMPC monolayers, the presence of cholesterol has no effect on the thermodynamics (formal redox potentials) of all-trans MK-7, but the kinetics are affected. Addition of an inert electrolyte (sodium perchlorate; change of ionic strength) to the aqueous phase shifts the redox potentials of all-trans MK-7 only slightly. The formal redox potentials of all-trans MK-4 were determined in TMCL and nCL monolayers and found to be higher in nCL monolayers than in TMCL monolayers. The apparent electron transfer rate constants, transfer coefficients and activation energies of all-trans MK-4 in cardiolipins have been also determined. Most surprisingly, the apparent electron transfer rate constants of all-trans MK-4 exhibit an opposite pH dependence for TMCL and nCL films: the rate constants increase in TMCL films with increasing pH, but in nCL films they increase with decreasing pH. This study is a contribution to understand environmental effects on the redox properties of membrane bond redox systems.

Graphical abstract

An Alternative to Carbon Additives: The Fabrication of Conductive Layers Enabled by Soluble Conducting Polymer Precursors - A Case Study for Organic Batteries

Utilizing organic redox-active materials as electrodes is a promising strategy to enable innovative battery designs with low environmental footprint during production, which can be hard to achieve with traditional inorganic materials. Most electrode compositions, organic or inorganic, require binders for adhesion and conducting additives to enable charge transfer through the electrode, in addition to the redox-active material. Depending on the redox-active material, many types and combinations of binders and conducting additives have been considered. We designed a conducting polymer (CP), with a soluble, trimeric unit based on 3,4-ethylenedioxythiophene (E) and 3,4-propylenedioxythiophene (P) as the repeat unit, acting as a combined binder and conducting additive. While CPs as additives have been explored earlier, in the current work, the use of a trimeric precursor enables solution processing together with the organic redox-active material. To evaluate this concept, the CP was blended with a redox polymer (RP), which contained a naphthoquinone (NQ) redox group at different ratios. The highest capacity for the total weight of the CP/RP electrode was 77 mAh/g at 1 C in the case of 30% EPE and 70% naphthoquinone-substituted poly(allylamine) (PNQ), which is 70% of the theoretical capacity given by the RP in the electrode. We further used this electrode in an aqueous battery, with a MnSO₄ cathode. The battery displayed a voltage of 0.95 V, retaining 93% of the initial capacity even after 500 cycles at 1 C. The strategy of using a solution-processable CP precursor opens up for new organic battery designs and facile evaluation of RPs in such.

Hydrothermal Generation of Conjugated Polymers Using the Example of Pyrrone Polymers and Polybenzimidazoles

Various polyimides and polyamides have recently been prepared via hydrothermal synthesis in nothing but H2 O under high-pressure and high-temperature conditions. However, none of the prepared polymers feature a truly conjugated polymer backbone. Here, we report on an expansion of the synthetic scope of this straightforward and inherently environmentally friendly polymerization technique to the generation of conjugated polymers. Selected representatives of two different polymer classes, pyrrone polymers and polybenzimidazoles, were generated hydrothermally. We present a mechanistic discussion of the polymer formation process as well as an electrochemical characterization of the most promising product.

An Aqueous Conducting Redox-Polymer-Based Proton Battery that Can Withstand Rapid Constant-Voltage Charging and Sub-Zero Temperatures

Electrodes based on organic matter operating in aqueous electrolytes enable new approaches and technologies for assembling and utilizing batteries that are difficult to achieve with traditional electrode materials. Here, we report how thiophene-based trimeric structures with naphthoquinone or hydroquinone redox-active pendent groups can be processed in solution, deposited, dried and subsequently polymerized in solid state to form conductive (redox) polymer layers without any additives. Such post-deposition polymerization offers efficient use of material, high mass loading (up to 10 mg cm-2 ) and good flexibility in the choice of substrate and coating method. By employing these materials as anode and cathode in an acidic aqueous electrolyte a rocking-chair proton battery is built. The battery shows good cycling stability (85 % after 500 cycles), withstands rapid charging, with full capacity (60 mAh g-1 ) reached within 100 seconds, allows for direct integration with photovoltaics, and retains its favorable characteristics even at -24 °C.