Porous carbon encapsulated Mn3O4 for stable lithium storage and its ex-situ XPS study

Tumor microenvironment-activatable nanocatalysts with chemodynamic therapy and enhanced autophagy for specific treatment of oral squamous cell carcinoma

Adjuvant therapy following surgery is imperative for enhancing the prognosis of patients with oral squamous cell carcinoma (OSCC) in the clinical setting. Nevertheless, challenges such as treatment resistance mediated by the tumor microenvironment (TME), systemic toxicity, and adverse side effects hinder the effectiveness of conventional adjuvant therapy. In this context, we introduce a novel nanocatalyst denoted as MnO2-x@HA-CCM (MnHA@CCM NC) designed specifically for treating OSCC. This nanocatalyst exerts targeted anti-tumor effects through TME-activatable chemodynamic therapy (CDT) and tumoricidal autophagy. The MnHA@CCM NCs exploit the biocompatibility of hyaluronic acid (HA) coating and the homologous targeting effect of cancer cell membrane (CCM) camouflage, ensuring safe in vivo delivery and specific accumulation at tumor sites. Following intracellular uptake, Fenton-like Mn2+ is generated by consuming glutathione (GSH) within the TME. Subsequently, Mn2+ catalyzes the overproduced H2O2 to generate reactive oxygen species (ROS), inducing cell apoptosis through mitochondrial damage. Additionally, phagocytized NCs and the resultant ROS accumulation in tumor cells elevate the autophagy flux, leading to autophagosome overload and consequent tumoricidal autophagy. Notably, normal cells without TME-catalytic CDT undergo mild protective autophagy to rebalance the stimulation of NCs. As a result, the TME-activatable MnHA@CCM NCs demonstrate a therapeutic efficacy in inhibiting cancer cell growth both in vitro and in vivo. This study presents a targeted treatment strategy for OSCC tumors while sparing normal cells, offering a potential alternative in the realm of adjuvant therapy.

Photo-thermal coupling to enhance CO2 hydrogenation toward CH4 over Ru/MnO/Mn3O4

Upcycling of CO2 into fuels by virtually unlimited solar energy provides an ultimate solution for addressing the substantial challenges of energy crisis and climate change. In this work, we report an efficient nanostructured Ru/MnOx catalyst composed of well-defined Ru/MnO/Mn3O4 for photo-thermal catalytic CO2 hydrogenation to CH4, which is the result of a combination of external heating and irradiation. Remarkably, under relatively mild conditions of 200 °C, a considerable CH4 production rate of 166.7 mmol g-1 h-1 was achieved with a superior selectivity of 99.5% at CO2 conversion of 66.8%. The correlative spectroscopic and theoretical investigations suggest that the yield of CH4 is enhanced by coordinating photon energy with thermal energy to reduce the activation energy of reaction and promote formation of key intermediate COOH* species over the catalyst. This work opens up a new strategy for CO2 hydrogenation toward CH4.

Configurational Entropy Strategy Enhanced Structure Stability Achieves Robust Cathode for Aluminum Batteries

Rechargeable aluminum batteries (RABs) are an emerging energy storage device owing to the vast Al resources, low cost, and high safety. However, the poor cyclability and inferior reversible capacity of cathode materials have limited the enhancement of RABs performance. Herein, a high configurational entropy strategy is presented to improve the electrochemical properties of RABs for the first time. The high-entropy (Fe, Mn, Ni, Zn, Mg)3 O4 cathode exhibits an ultra-stable cycling ability (109 mAh g-1 after 3000 cycles), high specific capacity (268 mAh g-1 at 0.5 A g-1 ), and rapid ion diffusion. Ex situ characterizations indicate that the operational mechanism of (Fe, Mn, Ni, Zn, Mg)3 O4 cathode is mainly based on the redox process of Fe, Mn, and Ni. Theoretical calculations demonstrate that the oxygen vacancies make a positive contribution to adjusting the distribution of electronic states, which is crucial for enhancing the reaction kinetics at the electrolyte and cathode interface. These findings not only propose a promising cathode material for RABs, but also provide the first elucidation of the operational mechanism and intrinsic information of high-entropy electrodes in multivalent ion batteries.

Rational Construction of a Triple-Phase Reaction Zone Using CuO-Based Heterostructure Nanoarrays for Enhanced Water Oxidation Reaction

The development of high-efficiency oxygen evolution reaction (OER) electrocatalysts for the production and conversion of clean energy is paramount yet also full of challenges. Herein, we proposed a simple and universal method to precisely fabricate the hierarchically structured CuO/TMOs loaded on Cu foil (CuO/TMOs/CF) (TMO represents Mn3O4, NiO, CoO, and CuO) nanorod-array electrodes as a highly active and stable OER electrocatalyst, employing Cu(OH)2/CF as a self-sacrificing template by the subsequent H2O2-induced chemical deposition (HiCD) and pyrolysis process. Taking CuO/Mn3O4/CF as an example, we systematically investigated its structure-performance relationship via experimental and theoretical explorations. The enhanced OER activity can be ascribed to the rational design of the nanoarray with multiple synergistic effects of abundant active sites, excellent electronic conductivity of the metallic Cu foil substrate, strong interface charge transfer, and quasi-superhydrophilic/superaerophobic property. Consequently, the optimal CuO/Mn3O4/CF presents an overpotential of 293 mV to achieve a current density of 20 mA cm-2 in 1.0 M KOH media, comparable to that of commercial RuO2 (282 mV), delivering excellent durability by the electrolysis of water at a potential of around 1.60 V [vs reversible hydrogen electrode (RHE)] without evident degeneration. This work might offer a feasible scheme for developing a hybrid nanoarray OER electrocatalyst via regulating electron transportation and mass transfer.

Microwave-Assisted Rational Designed CNT-Mn3 O4 /CoWO4 Hybrid Nanocomposites for High Performance Battery-Supercapacitor Hybrid Device

Extensive research interest in hybrid battery-supercapacitor (BSH) devices have led to the development of cathode materials with excellent comprehensive electrochemical properties. In this work, carbon nanotube (CNT)-Mn3 O4 /CoWO4 triple-segment hybrid electrode is synthesized by using a two-step microwave-assisted hydrothermal route. Systematic physical characterization revealed that, with the assistance of microwave, granular Mn3 O4 and spheroid-like CoWO4 with preferred orientation, and oxygen vacancies are stacked or arranged on CNTs skeletons to construct a rational designed hybrid nanocomposite with abundant heterointerfaces and interfacial chemical bonds. Electrochemical evaluations show that the synergistic cooperation in CNT-Mn3 O4 /CoWO4 resulted in an ultra-high specific capacity (1907.5 C g-1 /529.8 mA h g-1 at 1 A g-1 ), a wide operating voltage window (1.15 V), the satisfactory rate capability (capacity maintained at 1016.5 C g-1 /282.3 mA h g-1 at 15 A g-1 ), and excellent cycling stability (117.2% initial capacity retention after 13000 cycles at 15 A g-1 ). In addition, the assembled CNT-Mn3 O4 /CoWO4 //N doped porous carbon (NC) BSH device delivered a stable working voltage of 2.05 V and superior energy density of 67.5 Wh kg-1 at power density of 1025 W kg-1 , as well as excellent stability (92.2% capacity retained at 5 A g-1 for 12600 cycles). This work provides a new and feasible tactic to develop high-performance transition metal oxide-based cathodes for advanced BSH devices.

Flexible Mn3O4/MXene Films with 2D-2D Architectures as Stable and Ultrafast Anodes for Li-Ion Batteries

Mn₃O₄ is regarded as a promising anode material for lithium-ion batteries (LIBs) based on its ultrahigh theoretical capacity (937 mAh g^-1) and low cost but suffers from poor electronic conductivity and large volume variation during the lithiation/delithiation process, which result in dramatic capacity fading and inferior rate capability. Ti₃C₂T_x MXene, a novel two-dimensional transition metal carbide with metallic conductivity, excellent mechanical properties, and hydrophilic surface, could be an ideal candidate to improve the lithium storage performance of Mn₃O₄. Here, a unique flexible, 2D-2D Mn₃O₄/MXene film is fabricated by assembling 2D Mn₃O₄ with Ti₃C₂T_x nanosheets through a simple vacuum filtration approach. In this unique 2D-2D nanostructure, MXene nanosheets buffer the volume change of Mn₃O₄ during the charge/discharge process. Moreover, the introduction of MXene enables the fabricated 2D-2D nanostructure with excellent flexibility and can be directly used as an electrode for LIBs, which is beneficial for enhancing the energy density of the assembled batteries. As a result, the flexible film of Mn₃O₄-MXene-8-2 shows excellent lithium storage performances in terms of specific capacity (931 mAh g^-1 at 0.05 A g^-1), rate capability (624 mAh g^-1 at 1 A g^-1), and cycling stability, demonstrating its great potential for the application in LIBs.

Electrical-based ultrafiltration processes enhanced by in-situ generation of Fe(III): Significance of permanganate oxidation

In this study, a permanganate-assisted electrocoagulation-ultrafiltration (PEC-UF) process was proposed to control membrane fouling in the treatment of secondary effluent. Four comparable systems, i.e., UF, electro-UF (E-UF), electrocoagulation-UF (EC-UF), and PEC-UF, were investigated to systematically clarify the role of permanganate and electrocoagulation in mitigating membrane fouling. Results revealed that the formation of a dense cake layer containing concentrated solutes was the primary reason for membrane fouling. Electrocoagulation significantly mitigated membrane fouling and resulted in the reduction of the normalized transmembrane pressure of the EC-UF and PEC-UF systems by 35.0% and 44.6% compared with the UF control system, respectively. However, the retention of a considerable amount of iron oxyhydroxide precipitates on the membrane surface aggravated inorganic fouling in the in-situ EC-UF system. Furthermore, the enhanced formation of Fe(III) by oxidation of Fe(II) with permanganate promoted the coagulation process. Hence, increased generation of Fe(III) and enhanced coagulation promoted by formed MnO_x accelerated the formation of a hydrophilic cake layer with high porosity and thereby reduced the occurrence of both organic and inorganic membrane fouling. These results demonstrated the potential application of permanganate-assisted in-situ electrical-based methods to control UF membrane fouling during advanced wastewater treatment.

Screen-printing of core-shell Mn3O4@C nanocubes based sensing microchip performing ultrasensitive recognition of allura red

Allura red (AR) is a member of azo dyes is commonly used as an additive in foods and soft drinks. However, due to the special harm of the azo structure to the human body, the dosage control of AR becomes particularly necessary. The present detection methods are time-consuming, expensive and complicated. In order to address the above issues, a core-shell nanocubes constructed sensor has been developed to determine the ultrawide detection range and selective recognition of AR with a long-term reusability. The core-shell architecture is composed of carbon material of 12.64 nm thickness covering 600 nm Mn3O4 nanocube. This nanocomposite combines the advantages of Mn3O4@C, possessing high electrocatalysis and chemical stability. As confirmed in using sports drinks as real samples, the as-prepared AR sensor exhibites excellent selectivity with an ultra-wide linear range from 0.1 to 1748.4 μM, and meanwhile, this sensor can also meet the requirements of remarkable anti-interference and reusability over 30 days.

Micronutrients encapsulation by starch as an enhanced efficiency fertilizer

Developing different paths to achieve sustainable agriculture is no longer an option; it is a necessity. EEF materials are alternatives to improve the efficacy of the agrochemicals in the soil and plant, reducing wasting and environmental contamination. The present work aims to develop EEF materials based on starch and micronutrients, considering few works address EEFs materials with micronutrients. Monoelementary dispersions of gelatinized starch with micronutrients (Fe, Cu, Mn) were spray-dried and thermally, structurally, and morphologically characterized. We evaluated water-medium nutrient release, release kinetics, and the swelling degree. Different micronutrients affect morphology, size distribution, swelling degree, release, kinetics, and interaction between polymer-nutrient. Bigger particle sizes achieved a higher swelling degree, which led to decreased micronutrient release in the water. The Peppas-Sahlin model mainly ruled the release kinetics (fitted to all the materials). This result confirmed our hypothesis that a swelling starch delays the release.

Enhanced perfluorooctanoic acid (PFOA) accumulation by combination with in-situ formed Mn oxides under drinking water conditions

Particulate manganese oxide (MnOx) deposition in drinking water distribution systems (DWDS) gives rise to the risk of water discoloration at the consumers' tap; however, its role in the fate and transport of trace organic pollutants in DWDS is not clear. Perfluorooctanoic acid (PFOA), a persistent organic pollutant frequently detected in natural water, was selected to investigate the potential effect of MnOx on its transportation behavior under DWDS conditions through laboratory batch experiments. The results show that PFOA can be greatly combined with MnOx formed in-situ through a Mn(II) oxidation process by free chlorine. However, the accumulation of PFOA by preformed MnOx was negligible. It was found that 1 mg/L Mn captured over 50% of PFOA with an initial concentration of 50 ng/L during oxidation. The water compositions of actual water could contribute to the effect of PFOA accumulation to a certain extent. Characterization of the solid products revealed that PFOA is homogenously embedded into MnOx. The combination of PFOA with MnOx occurs through a bridging effect of Mn(II) between the surface hydroxyls of MnOx and the -COOH group of PFOA. The resulting MnOx-PFOA particles were more inclined to agglomerate, enabling possibly easy deposition onto the pipe wall than ordinary MnOx particles. This study provides insights into the co-occurrence of metal deposits with PFOA and the potential risks posed by PFOA accumulation to consumers through the water distribution process.

Hetero-structured MnO-Mn3O4@rGO composites: Synthesis and nonenzymatic detection of H2O2

The construction of metal-oxide heterojunction architecture has greatly widened applications in the fields of optoelectronics, energy conversions and electrochemical sensors. In this study, olive-like hetero-structured MnO-Mn₃O₄ microparticles wrapped by reduced graphene oxide (MnO-Mn₃O₄@rGO) were synthesized through a facile solvothermal-calcination treatment. The morphology and structure of MnO-Mn₃O₄@rGO were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray diffraction. The as-synthesized MnO-Mn₃O₄@rGO exhibited prominent catalyzing effect on the electroreduction of H₂O₂, due to the combination of good electrical conductivity of rGO and the synergistic effect of MnO and Mn₃O₄. The MnO-Mn₃O₄@rGO modified glassy carbon electrode provided a wide linear response from 0.004 to 17 mM, a low detection limit of 0.1 μM, and high sensitivity of 274.15 μA mM^-1 cm^-2. The proposed sensor displayed noticeable selectivity and long-term stability. In addition, the biosensor has been successfully applied for detecting H₂O₂ in tomato sauce with good recovery, revealing its promising potential applications for practical electrochemical sensors.

Producing "Symbiotic" Reduced Graphene Oxide/Mn3O4 Nanocomposites Directly from Converting Graphite for High-Performance Supercapacitor Electrodes

Almost all existing methods for preparing reduced graphene oxide/Mn₃O₄ (RGO/Mn₃O₄) composites are based on the synthetized graphene or graphene oxides (GO), which make them complicated and high-cost processes. Here, we reported a new method, which is able to convert graphite directly to RGO/Mn₃O₄ composites. Thus, it is simpler, more economical, and productive. The structure of RGO/Mn₃O₄ inheriting intermediate product GO/MnO₂ composites that are formed by the present method is a novel three-dimensional "multilayer steamed bread" nanostructure, which constitutes mutually beneficial "symbiosis". The nano-Mn₃O₄ supports the space between RGO layers and further to the combination of RGO to self-assemble into large-sized (>40 μm) nanocomposites. Meanwhile, the formed Mn₃O₄ particles were small (60 × 10 nm²) in diameter and distributed homogeneously without the use of any template and surfactant. Because the structure and nanosize of composite cause the excellent electrochemical properties, RGO/Mn₃O₄ electrodes deliver an enhanced specific capacitance of 438.7 F/g at 0.3 A/g and outstanding cyclic stability (77.5% of its initial capacitance is retained after 1000 cycles).

Electrospinning-based construction of porous Mn3O4/CNFs as anodes for high-performance lithium-ion batteries

Porous one-dimensional Mn₃O₄/CNFs composites are fabricated and used as anode materials for Li-ion batteries; they exhibit excellent electrochemical performance.